USB Virtualization Drivers not appearing after multiple installs
-
04/رجب/1430 03:56 صI have been using XP Mode on windows 7 RC1 I had to reformat my computer and when i reinstalled windows virtual PC and XP Mode I had 3 unknown devices on the Virtual XP and on my host computer it does not have USB Virtualization drivers it had the first ttime and whenever i try to connect a USB Drive it gives me the following error:
"The virtualization driver for USB functionality is not working"- مقسم بواسطة Nitin.GargModerator 17/رجب/1430 02:12 م Separate question
الإجابات
-
20/شعبان/1430 05:44 صالمشرف Closing the thread for lack of response.
Thanks
Nitin
Check out the Engineering blog of Windows Virtual PC and Winodws XP Mode here: http://blogs.technet.com/windows_vpc/- تم وضع علامة كإجابة بواسطة Nitin.GargModerator 20/شعبان/1430 05:45 ص
جميع الردود
-
04/رجب/1430 06:15 ص
I have been using XP Mode on windows 7 RC1 I had to reformat my computer and when i reinstalled windows virtual PC and XP Mode I had 3 unknown devices on the Virtual XP and on my host computer it does not have USB Virtualization drivers it had the first ttime and whenever i try to connect a USB Drive it gives me the following error:
"The virtualization driver for USB functionality is not working"
Can you please check that there is a device called 'USB Virtualization Connector Driver' under 'USB Virtualization' node in Win7 Device manager? Also, right click on that and select properties. Check the device is working properly. In case, all is fine; could you please do the following:
On the host machine, from the command line run the following command from the elevated prompt:
logman start trace Vpcrpm -ets -o Vpcrpm.etl -nb 16 256 -bs 64 -max 256 -f bincirc -p {F9CE3A24-8E6A-453E-A1F8-1B8F2A31BD7E} 0xffff 5
logman start trace vpcusb -ets -o vpcusb.etl -nb 16 256 -bs 64 -max 256 -f bincirc -p {6692c45b-c0fb-4786-bc5c-33638678f709} 0xffff 5Repro your scenario in your case when you get the error.
logman update /fd Vpcrpm –ets
logman update /fd vpcusb –ets
logman stop Vpcrpm -ets
logman stop vpcusb -ets
Send the etl files to wcvdata@microsoft.com . Please mention the thread id when sending the details for easy tracking.
Thanks, -Rahul -- "This posting is provided "AS IS" with no warranties, and confers no rights. You assume all risk for your use." -
04/رجب/1430 06:32 ص
The first two commands worked right but the third and forth one didnt:I have been using XP Mode on windows 7 RC1 I had to reformat my computer and when i reinstalled windows virtual PC and XP Mode I had 3 unknown devices on the Virtual XP and on my host computer it does not have USB Virtualization drivers it had the first ttime and whenever i try to connect a USB Drive it gives me the following error:
"The virtualization driver for USB functionality is not working"
Can you please check that there is a device called 'USB Virtualization Connector Driver' under 'USB Virtualization' node in Win7 Device manager? Also, right click on that and select properties. Check the device is working properly. In case, all is fine; could you please do the following:
On the host machine, from the command line run the following command from the elevated prompt:
logman start trace Vpcrpm -ets -o Vpcrpm.etl -nb 16 256 -bs 64 -max 256 -f bincirc -p {F9CE3A24-8E6A-453E-A1F8-1B8F2A31BD7E} 0xffff 5
logman start trace vpcusb -ets -o vpcusb.etl -nb 16 256 -bs 64 -max 256 -f bincirc -p {6692c45b-c0fb-4786-bc5c-33638678f709} 0xffff 5Repro your scenario in your case when you get the error.
logman update /fd Vpcrpm –ets
logman update /fd vpcusb –ets
logman stop Vpcrpm -ets
logman stop vpcusb -ets
Send the etl files to wcvdata@microsoft.com . Please mention the thread id when sending the details for easy tracking.
Thanks, -Rahul -- "This posting is provided "AS IS" with no warranties, and confers no rights. You assume all risk for your use."
"C:\Windows\system32>logman update /fd Vpcrpm -ets
Argument '-ets' is unknown.
Argument 'fd' is not allowed with the other arguments specified.
Error:
The parameter is incorrect." and:
" Microsoft Windows [Version 6.1.7100]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>logman update /fd vpcusb -ets
Argument '-ets' is unknown.
Argument 'fd' is not allowed with the other arguments specified.
Error:
The parameter is incorrect."
and the 'USB Virtualization Connector Driver' is NOT listed
-
04/رجب/1430 05:53 مSo the installation of VPC doesnt install this driver. Please send the cbs.log present in <SystemDrive>\Winows\Logs\CBS and setupapi.dev.log present in <SystemDrive>\Winows\inf
Thanks, -Rahul -- "This posting is provided "AS IS" with no warranties, and confers no rights. You assume all risk for your use." -
04/رجب/1430 08:33 مim sending the files to wcvdata@microsoft.com ??
-
27/رجب/1430 02:18 مالمشرف
We haven't received files from you. Please send us the files to help us debug the issue further.
Thanks
Nitin -
13/شعبان/1430 09:30 صالمشرفHi ,
Can you you please answer the question above? We need to hear from you within 3 days or we will need to close this thread.
Thanks for your cooperation.
Nitin -
20/شعبان/1430 05:44 صالمشرف Closing the thread for lack of response.
Thanks
Nitin
Check out the Engineering blog of Windows Virtual PC and Winodws XP Mode here: http://blogs.technet.com/windows_vpc/- تم وضع علامة كإجابة بواسطة Nitin.GargModerator 20/شعبان/1430 05:45 ص
-
25/ذو الحجة/1430 05:45 ص
Hi ,
Can you you please answer the question above? We need to hear from you within 3 days or we will need to close this thread.
Thanks for your cooperation.
Nitin
You don't need to close this thread. I see you have marked it answered because of no response? I guess you did not hear about the new policy, that microsoft employees can no longer mark questions answered. Thanks.
What do you do if there is no device manager node for usb virtualization? I can't get it working in xp mode. I get the popup that the virtualization driver is not working. -
23/صفر/1431 03:20 مNow I've the same Problem with the Final W7 Ultimate (or Professional, 32 or 64 B).
Where should I send the two files (or is there a solution at the horizon)?
TIA.
Rgds -
08/ربيع الثاني/1431 09:04 مi have sum problem 7 ultimate 64B
-
23/محرم/1432 03:58 ص
I too am having this problem. Device manager does not show the suggested 'USB Virtualization Connector Driver'. I have pasted the results of the suggested commands below. I have also attached the output from SYSTEM INFORMATION to my email message.
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32> logman start trace Vpcrpm -ets -o Vpcrpm.etl -nb
16 256 -bs 64 -max 256 -f bincirc -p {F9CE3A24-8E6A-453E-A1F8-1B8F2A31BD7E} 0x
ffff 5
The command completed successfully.
C:\Windows\system32> logman start trace vpcusb -ets -o vpcusb.etl -nb
16 256 -bs 64 -max 256 -f bincirc -p {6692c45b-c0fb-4786-bc5c-33638678f709} 0xf
fff 5
The command completed successfully.
C:\Windows\system32>logman update /fd Vpcrpm -ets
Argument '-ets' is unknown.
Argument 'fd' is not allowed with the other arguments specified.
Error:
The parameter is incorrect.
C:\Windows\system32> logman update /fd vpcusb -ets
Argument '-ets' is unknown.
Argument 'fd' is not allowed with the other arguments specified.
Error:
The parameter is incorrect.
C:\Windows\system32>logman stop Vpcrpm -ets
The command completed successfully.
C:\Windows\system32>logman stop vpcusb -ets
The command completed successfully.
C:\Windows\system32>
-
25/محرم/1433 06:31 ص
I was having the same issues. Host computer Win7 64bit running win virtual PC in xp mode. USB virtualization was working fine until a friend uninstalled something. Here is what I did to fix the problem in win7 64bit:
Note, the following is for installing non plug and play devices. use with caution.
1.) In "device manager" right click the "top node" . this could be the computer description or name.
2.) Left click "add legacy hardware" and follow the instructions.
3.) Click next then select "Install the hardware that I manually select from a list".
4.) You should see a list that says "common hardware types". Scroll down and select "USB Virtualization".
5.) A window should pop up. Under "Model" there should be several choices. Select "USB Virtualization Connection Driver" and install this driver.
This fixed my problem and I can once again attach USB devices to virtual PC. Please use this at your own risk. Apply the above steps in the host computer. Let me know if this helps.
- تم التحرير بواسطة dukedup 25/محرم/1433 06:41 ص
- تم الاقتراح كإجابة بواسطة Wantooدعم Microsoft 09/ربيع الأول/1433 11:36 ص
-
18/ربيع الأول/1433 07:30 صThanks for the solution...it worked for me... USE IT ON YOUR OWN RISK...
-
07/جمادى الأولى/1433 05:16 مThis worked like a charm. Thank you for your answer.
.png){kind=spacer}
