Přihlásit
 
HlavníKnihovnaCertifikaceDownloadPodporaKomunitaFóra
Zdroje informací pro profesionály v oboru IT >
> 
> 
VPN Error 806

Unanswered VPN Error 806

  • 7. června 2012 0:51
     
     
    Přihlásit se a hlasovat
    0

    I have been trying to get VPN to work for a while but keep getting the 806 error. I have setup routing and remote access on Server 2008. I'm trying to use PPTP. I have enabled PPTP and GRE on firewalls on both the server and client. What I think might be the problem is my router. It is a Netgear WGR614v10. I have read that the SPI firewall needs to be disabled. But I do not see this firewall in the settings. What I see is a Disable Port Scan and DoS Protection option. But when I disable this it still doesn't work. But I'm not even sure if this is the problem. I feel like I have exhausted all my options. But I'm sure there is something I'm missing.

    Thanks in advance!

     

Všechny reakce

  • 7. června 2012 1:38
     
     
    Přihlásit se a hlasovat
    0

    This one may help.

    http://blogs.technet.com/b/rrasblog/archive/2009/08/12/troubleshooting-common-vpn-related-errors.aspx

     

     

     

    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]

    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

     
  • 7. června 2012 5:57
     
     
    Přihlásit se a hlasovat
    0

    Hi Can you please try this link by port forwarding method,

    http://portforward.com/english/routers/port_forwarding/Netgear/WGR614v10/Bay_VPN.htm

     
  • 7. června 2012 7:54
     
     
    Přihlásit se a hlasovat
    0
    i usually get error 721.............................vpn. 
     
  • 8. června 2012 1:31
    Moderátor
     
     
    Přihlásit se a hlasovat
    0


    Hi,

    Thank you for the post.

    Agree with Jonathan, please set port forwarding (47,1723) to your VPN server. Here is thread replied by NETGEAR Support.
    http://forum1.netgear.com/showthread.php?p=69742 

    Regards

    Rick Tan

    TechNet Community Support

     
  • 11. června 2012 2:36
     
     
    Přihlásit se a hlasovat
    0
    Hey guys. I appreciate all the response but none of the suggestions worked. I've already tried most of it. But the long response on the netgear support didn't work either. If you can think of anything else let me know.
     
  • 11. června 2012 5:54
    Moderátor
     
     
    Přihlásit se a hlasovat
    0

    Hi,

    Please test to connect VPN server in LAN: Use internal client VPN to VPN server internal IP address. It could verify if the problem is on your VPN server or Netgear router. 

    Regards

    Rick Tan

    TechNet Community Support

     
  • 11. června 2012 23:33
     
     
    Přihlásit se a hlasovat
    0
    I can't connect that way either. I get the same 806 error.
     
  • 12. června 2012 2:02
    Moderátor
     
     
    Přihlásit se a hlasovat
    0


    Hi,

    So the issue is on your VPN server or internal switch/router. Try to close the firewall on your VPN server and test the PPTP port via portqry or PPTP ping.

    http://technet.microsoft.com/en-us/library/bb877965.aspx

    Regards

    Rick Tan

    TechNet Community Support

     
  • 12. června 2012 22:42
     
     
    Přihlásit se a hlasovat
    0
    Ok. I'm not sure if I did this right, but I turned off the firewall and I ran pptpsrv on the server and then tried to connect through VPN. It showed that it received 4 packets. But it did not connect successfully. Same 806 error.
     
  • 14. června 2012 2:57
    Moderátor
     
     
    Přihlásit se a hlasovat
    0

    Hi,

    Please try to close your server antivirus software/ISA client or clean boot your server to test.
    In addition, set up another VPN server to test internal VPN.

    Regards

    Rick Tan

    TechNet Community Support

     
  • 14. června 2012 20:28
     
     
    Přihlásit se a hlasovat
    0
    I closed the antivirus software. So far all I have tried is internal connection attempts to the VPN.