How to convert VMWare image to Hyper-V images?
Hi,
Now that Hyper-V seems to be working for us, we have several vmware image that I would like to convert over. Is this possible?
Regards,
Peter
Odpovědi
Here's a small how-to based on my experiences:
1) Uninstall VM tools from your VM
2) Shutdown the VM
If your VMs are based on SCSI drives (like mine were – because VMware recommends SCSI) and the operating systems are Windows XP, 2003 or earlier then you have to add the IDE driver to your VM before you shut it down in VMware.
Otherwise you will end up with a converted VM that starts up in Hyper-V with a blue screen of death (BSOD) and 0x0000007B – “Inaccessible Boot Device” error. This is due to the fact that your converted VM will have no Primary IDE Channel and Hyper-V will presume that your converted disk is IDE type and located on the Primary IDE Channel.
Doing a Windows Repair Install can fix the 0x7B Inaccessible Boot Device error – but it’s both time consuming and the result might not be good. (Believe me – I had to redo a migration of a SharePoint installation because a Windows Repair Install messed it up. Luckily I then came up with the solution described below instead).
Please note that adding a temporary IDE disk to your VM is not necessary with VMs running Windows Vista or Windows 2008 – they seem to detect the Primary IDE Channel during initial boot phase.
3) Add a new IDE disk drive to your VM: (any size will do)
Make sure that you select “Adapter: IDE 0 Device: 0” under “Virtual Device Node” while creating the new disk (otherwise you might end up with yet another SCSI disk)
4) Boot up your virtual machine with both drives connected and check that it detects your new IDE drive (along with a primary IDE channel and a disk device driver). You should be able to see the new drive as "not initialized" in Disk Management.
5) Power off your virtual machine and remove the newly created IDE disk from your VM (you can delete it from disk as well). Do not power on your VMware Machine again!
6) Now convert your VMDK file to VHD format using the newest Vmdk2Vhd utility (currently version 1.0.13) that can be downloaded from http://vmtoolkit.com.
7) You can now uninstall VMware Server and install Hyper-V + current Windows Updates on your host server
8) Create a new Virtual Machine in Hyper-V. Make sure you select “Use an existing virtual hard disk” and select the VHD file that you just created.
9) Power it on, Install “Integration Services” and reboot when prompted:
10) Assign the original IP address(es) to your new network card(s)
11) Check device manager
12) Do another reboot
13) Check that all your applications and services are running
14) Done!
Note: if you have Win2008 VM’s then it’s not necessary to add a temporary IDE disk during migration but you might want to copy the relevant KB949219 (http://support.microsoft.com/kb/949219) update package to your VM before converting it. Otherwise it will start up with three warnings in the Device Manager for “Microsoft VMBus Video Device”, “Microsoft VMBus HID Miniport” and “Microsoft VMBus Network Adapter” - hence you will have no network access. I worked around it by “burning” the KB949219 updates to an ISO file using “ISO recorder“ (http://isorecorder.alexfeinman.com) and mounting the ISO file to my VM.
Microsoft's System Center Virtual Machine Manager provides the ability to convert VMware virtual machines into the VHD format. Yes, SCVMM only works with Virtual Server 2005 R2 SP1 today, but the VHD format is common between Virtual Server and Hyper-V. After using SCVMM to convert, you can load the virtual machine into Virtual Server and remove the VM additions. Then you can move the VHD file over to Hyper-V. If the virtual machine is either Windows Server 2008 or Windows Server 2003 SP2, you can add the integration components under Hyper-V.
Všechny reakce
- Vmdk2Vhd is a simple utility to convert virtual hard drive images from VMWare's VMDK format into the Microsoft's VHD format. This is a sector by sector copy operation from one format to the other and the source file remains unaltered.
Microsoft's System Center Virtual Machine Manager provides the ability to convert VMware virtual machines into the VHD format. Yes, SCVMM only works with Virtual Server 2005 R2 SP1 today, but the VHD format is common between Virtual Server and Hyper-V. After using SCVMM to convert, you can load the virtual machine into Virtual Server and remove the VM additions. Then you can move the VHD file over to Hyper-V. If the virtual machine is either Windows Server 2008 or Windows Server 2003 SP2, you can add the integration components under Hyper-V.
- Tim,
You can also add the IC's to Suse Enterprise 10 with the Hyper-V Beta Linux IC's available from http://connect.microsoft.com
Cheers,
Stephen Edgar FYI - Once you have converted the VMWare files into .VHD format, here is a simple How-To for importing into Hyper-V
http://www.groovypost.com/howto/microsoft/windows-server/migrate-microsoft-virtual-server-2005-r2-vm-to-windows-server-2008-hyper-v/Here's a small how-to based on my experiences:
1) Uninstall VM tools from your VM
2) Shutdown the VM
If your VMs are based on SCSI drives (like mine were – because VMware recommends SCSI) and the operating systems are Windows XP, 2003 or earlier then you have to add the IDE driver to your VM before you shut it down in VMware.
Otherwise you will end up with a converted VM that starts up in Hyper-V with a blue screen of death (BSOD) and 0x0000007B – “Inaccessible Boot Device” error. This is due to the fact that your converted VM will have no Primary IDE Channel and Hyper-V will presume that your converted disk is IDE type and located on the Primary IDE Channel.
Doing a Windows Repair Install can fix the 0x7B Inaccessible Boot Device error – but it’s both time consuming and the result might not be good. (Believe me – I had to redo a migration of a SharePoint installation because a Windows Repair Install messed it up. Luckily I then came up with the solution described below instead).
Please note that adding a temporary IDE disk to your VM is not necessary with VMs running Windows Vista or Windows 2008 – they seem to detect the Primary IDE Channel during initial boot phase.
3) Add a new IDE disk drive to your VM: (any size will do)
Make sure that you select “Adapter: IDE 0 Device: 0” under “Virtual Device Node” while creating the new disk (otherwise you might end up with yet another SCSI disk)
4) Boot up your virtual machine with both drives connected and check that it detects your new IDE drive (along with a primary IDE channel and a disk device driver). You should be able to see the new drive as "not initialized" in Disk Management.
5) Power off your virtual machine and remove the newly created IDE disk from your VM (you can delete it from disk as well). Do not power on your VMware Machine again!
6) Now convert your VMDK file to VHD format using the newest Vmdk2Vhd utility (currently version 1.0.13) that can be downloaded from http://vmtoolkit.com.
7) You can now uninstall VMware Server and install Hyper-V + current Windows Updates on your host server
8) Create a new Virtual Machine in Hyper-V. Make sure you select “Use an existing virtual hard disk” and select the VHD file that you just created.
9) Power it on, Install “Integration Services” and reboot when prompted:
10) Assign the original IP address(es) to your new network card(s)
11) Check device manager
12) Do another reboot
13) Check that all your applications and services are running
14) Done!
Note: if you have Win2008 VM’s then it’s not necessary to add a temporary IDE disk during migration but you might want to copy the relevant KB949219 (http://support.microsoft.com/kb/949219) update package to your VM before converting it. Otherwise it will start up with three warnings in the Device Manager for “Microsoft VMBus Video Device”, “Microsoft VMBus HID Miniport” and “Microsoft VMBus Network Adapter” - hence you will have no network access. I worked around it by “burning” the KB949219 updates to an ISO file using “ISO recorder“ (http://isorecorder.alexfeinman.com) and mounting the ISO file to my VM.
Hi!
I'm going to ask a dummy question...
Why can't the Virtuak machine in Hyper-V use SCSI disk and the problem is solved?
Is the answear as simple that Vmdk2Vhd utility simply make an "IDE" disk?
-Alexander
VMware can boot from SCSI and Hyper-V can only boot from IDE. Hyper-V supports SCSI disks as extra disks. If you have a VMware vm with multiple SCSI disks, only the boot disk has to be converted to IDE. The rest can be left as SCSI.
scsi disk also perform a little better onder hyper-v because of the context switches in the vmwp.exe process (wich runs in user mode) when using an ide controller
best advice: boot from ide (the only possible way) and the rest on a scsi controller with scsi disks
Ahhhh, this was great news and very helpful.
So the VMware SCSI-disk which is only data disk/Extra disks I can use as-is in Hyper-V. Mayby change name from xxx.vmdk to xxx.vhd?
If so, this is very time-saving since I have some TB with disk.
-Alexander
- You can't simply rename VMware SCSI disks. VMware vmdk and Microsoft vhd are different formats. You'll still have to convert from vmdk to vhd.
I see.
ALL disk must be converted, and the boot disk must be set at IDE in the VM i Hyper-V, the other disk can be set at SCSI.
This was very helpful and saved me for a lot of time googling around.
-Alexander
I had some test Virtual Machines on our ESXi server that I wanted to test on Hyper-V, (Version 3 doesnt' give me the correct driver for clustering 2008 Servers). I exported them as a virtual Appliance, and then use the VmWare Standalone Converter to change it to a Workstation 6.5 VM, during that process I had the option to change the Hard Disk to IDE. I then used the vmdk to vhd converted and then opened the Virtual Machine in HyperV - R2...
- The only thing I would add to that is to remove the VM Tools before you start. See the checklist above by Steen Kirkby.
Bill - I have been trying to get this going for a while without success. i followed your advice but when I start the VHD in virtual PC (im on the move at the moment and can't use my hyper-v server) i get the following message;
"Reboot and select a proper Boot device
or insert boot media in selected boot device"
any ideas? or must i use hyper v? - Thanks Steen for your step by step process. Even we have both VMware and Microsoft Hyper V platforms setup. I want to convert a VMware .vmdk file to vhd file....................... I tried with the Vmdk2Vhd utility, but it is throwing me a error "Invalid Vmdk file, please select another"..
I am using VMWare ESX 3.5, please help
- I recently converted some vmdk files to vhd using this tool:
StarWind (V2V) Converter
http://www.starwindsoftware.com/converter
It's free and it worked well.
