Anmelden
 
HomeLibraryDownloadsSupportWebcasts & EventsCommunityForenBlogs
Ressourcen für IT-Professionals >
> 
> 
Hyper-V Server 2012 with HP Smart Array B110i RAID Controller

Answered Hyper-V Server 2012 with HP Smart Array B110i RAID Controller

  • Mittwoch, 16. Januar 2013 13:20
     
     
    Anmelden
    0

    I'm setting up a new server for a client and attempting to install Hyper-V Server 2012.

    When I turn on 'Embedded SATA RAID' within the BIOS settings on the ML330 G6, the Hyper-V installation cannot find any available disks for the installation to proceed. I searched for drivers for the 250GB SATA drives that are installed to no avail. I installed Windows and it can see the RAID1 array perfectly fine.

    Upon turning off the 'Embedded SATA RAID' function in the BIOS, the Hyper-V installation can see both drives. Hurrah. But now I can't use HW RAID :(

    I've turned 'Embedded SATA RAID' back on and tried the Hyper-V installation once more, again no drives available.

    What's the go? Hyper-V doesn't support HP's Smart Array controllers, or this controller specifically? But Windows does??


    Regards,

    <object cotype="cs" id="SILOBFWOBJECTID" style="width:0px;height:0px;display:block;" type="cosymantecnisbfw"></object>
    • Bearbeitet a_jacks0n Mittwoch, 16. Januar 2013 13:20
    • Bearbeitet a_jacks0n Mittwoch, 16. Januar 2013 13:20
    •  
     

Alle Antworten

  • Mittwoch, 16. Januar 2013 13:45
     
     
    Anmelden
    0

    Hi Jack,

    Please provide me below information:

    • Is your server model is certified with Windows Server 2012?
    • What is HP Smart Array Controller version?
    • Is firmware up-to-date?

    Your model is not certified with Windows Server 2012. Kindly search for "Implementing Microsoft Windows Server 2012 on HP ProLiant servers", You will find a PDF document from HP site. This document will clarify your doubts.

    Regards

    Hari Rama K

    • Als Antwort vorgeschlagen Hari Rama Donnerstag, 17. Januar 2013 04:26
    • Nicht als Antwort vorgeschlagen a_jacks0n Donnerstag, 17. Januar 2013 09:44
    •  
     
  • Mittwoch, 16. Januar 2013 15:22
     
     Beantwortet
    Anmelden
    0

    Hello

    it is a more hp forum related question.. however..

    Here the drivers you need :

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3958194&prodTypeId=329290&prodSeriesId=3958193&swLang=8&taskId=135&swEnvOID=4138

    inject them during the windows 2012 installation .

    Regards

    ------------------------------------------------------- I understand a little computers.

    • Als Antwort vorgeschlagen Ales75 Mittwoch, 16. Januar 2013 19:31
    • Als Antwort markiert a_jacks0n Donnerstag, 17. Januar 2013 09:34
    •  
     
  • Mittwoch, 16. Januar 2013 17:08
     
     
    Anmelden
    0

    pretty sure i used the 2008 r2 driver during install , not a certified solution though

    my blog is at http://flemmingriis.com , let me know if you found the post or blog helpfull or leaves room for improvement

     
  • Donnerstag, 17. Januar 2013 09:35
     
     
    Anmelden
    0

    Here the drivers you need :

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3958194&prodTypeId=329290&prodSeriesId=3958193&swLang=8&taskId=135&swEnvOID=4138

    inject them during the windows 2012 installation .

    Nice one! Thank you!
    <object cotype="cs" id="SILOBFWOBJECTID" style="width:0px;height:0px;display:block;" type="cosymantecnisbfw"></object>