Replication error
-
Freitag, 30. November 2012 18:35
I have to standalone system
Host 1 and host 2
and I got below error
Hyper-V failed to enable replication for virtual machine 'testrep': A connection with the server could not be established (0x00002EFD). (Virtual Machine ID 4458ED53-B365-4BDB-AB27-B5D7CDC2FECB)
Hyper-V cannot connect to the specified Replica server 'Replicatest.test.com'. Error: A connection with the server could not be established (0x00002EFD). Verify that the specified server is enabled as a Replica server, allows inbound connection on port '80', and supports the same authentication scheme.
I checked every possibility according to error
I am not able to do replication
Please Help Me
- Bearbeitet J P IT Freitag, 30. November 2012 18:37 change
Alle Antworten
-
Freitag, 30. November 2012 19:57Moderator
How are you verifying that the machines can communicate with each other over port 80?
What authentication mechanism are you using?
Have you checked the Event Log on both Servers? (there should be one specific to Replica / Hyper-V)
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will. -
Montag, 3. Dezember 2012 18:55Those error listed above is same in event viewer
-
Montag, 3. Dezember 2012 21:02
First test the Basics:
- Is Replicatest configured as replication Server with port 80 enabled?
- Is the Firewall rule for incoming Hyper-V Replica enabled?
Grüße/Regards Carsten Rachfahl | MVP Virtual Machine | MCT | MCITP | MCSA | CCA | Husband and Papa | www.hyper-v-server.de | First German Gold Virtualisation Kompetenz Partner ---- If my answer is helpful please mark it as answer or press the green arrow.
-
Montag, 3. Dezember 2012 21:16
Replication Configure
and firewall setting
turn off for domain but still I enabled port 80 for
-
Montag, 3. Dezember 2012 21:21
O.K. Two more questions:
- Wenn you specify the replication tartget on the VM did the System find the target on port 80 or did it not?
- do you have a Proxy with the command "netsh winproxy" defined?
Grüße/Regards Carsten Rachfahl | MVP Virtual Machine | MCT | MCITP | MCSA | CCA | Husband and Papa | www.hyper-v-server.de | First German Gold Virtualisation Kompetenz Partner ---- If my answer is helpful please mark it as answer or press the green arrow.
-
Montag, 3. Dezember 2012 21:36
Thank you for concern regarding my problem and reply me immediate
When I was trying to create replication that time only my hyper-v server get error in event log
Nothing happens at DR site not a single error generated.
and When I ran "netsh winproxy" command below message
The following command was not found : winporxy.
Now let me tell my background I am pure Database person I know how to create replication on database site and make database highly available
-
Montag, 3. Dezember 2012 21:43
Sorry I gave you the wrong command. You must open an command prompt with Administrator rights and enter "netsh winhttp Show Proxy". If it the command return that there is no Proxy everything is fine.
With Hyper-V Replica you create a repliation of a VM. The replication copys the VHD/VHDX file to the replication target and the replicated the changes every 5 minutes. Is your "source Server" also configured as replication Server? If not please do so.
Grüße/Regards Carsten Rachfahl | MVP Virtual Machine | MCT | MCITP | MCSA | CCA | Husband and Papa | www.hyper-v-server.de | First German Gold Virtualisation Kompetenz Partner ---- If my answer is helpful please mark it as answer or press the green arrow.
-
Montag, 3. Dezember 2012 21:49
That command gives me below result
Current WinHTTP proxy Settings;
Direct Access (no proxy server).
It has identically same setting on my "Source server "
-
Montag, 3. Dezember 2012 21:51
Some more Questions:
- Are your Servers in the same Domain?
- are the in the same subnet? If not is there a Firewall between the two Systems?
Grüße/Regards Carsten Rachfahl | MVP Virtual Machine | MCT | MCITP | MCSA | CCA | Husband and Papa | www.hyper-v-server.de | First German Gold Virtualisation Kompetenz Partner ---- If my answer is helpful please mark it as answer or press the green arrow.
-
Montag, 3. Dezember 2012 21:55yes My servers are in in same domain and same subnet also
-
Montag, 3. Dezember 2012 22:09
A nice error you have.
- can you ping the repica Server?
- Are there VMs on the replica Server?
- If yes can you try the replica with one of those to the source Server?
Grüße/Regards Carsten Rachfahl | MVP Virtual Machine | MCT | MCITP | MCSA | CCA | Husband and Papa | www.hyper-v-server.de | First German Gold Virtualisation Kompetenz Partner ---- If my answer is helpful please mark it as answer or press the green arrow.
-
Montag, 3. Dezember 2012 22:16
I am able to ping my replica server
There is One vm on replica server and i did tried to replicate to my source server this morning but I found same error.
One thing I forget to tell you that it did work 3 week ago but I am not able to create reverse replication so I deleted every things
-
Montag, 3. Dezember 2012 22:19
O.k. this is a very importand Information. Maybee there are some Folders left. Please find the "Hyper-V Replica" Folder and rename it. Then disable the replica Server configuration. Save it and than reconfigure it. It should create a new Hyper-V Replica Folder and than please try again.
Grüße/Regards Carsten Rachfahl | MVP Virtual Machine | MCT | MCITP | MCSA | CCA | Husband and Papa | www.hyper-v-server.de | First German Gold Virtualisation Kompetenz Partner ---- If my answer is helpful please mark it as answer or press the green arrow.
-
Montag, 3. Dezember 2012 22:47
I did rename folder and disable the replica sever configuration and save it restart both server
But same error
-
Mittwoch, 5. Dezember 2012 20:18
It work on my new freshly install systems but not working my old systemO.k. this is a very importand Information. Maybee there are some Folders left. Please find the "Hyper-V Replica" Folder and rename it. Then disable the replica Server configuration. Save it and than reconfigure it. It should create a new Hyper-V Replica Folder and than please try again.
Grüße/Regards Carsten Rachfahl | MVP Virtual Machine | MCT | MCITP | MCSA | CCA | Husband and Papa | www.hyper-v-server.de | First German Gold Virtualisation Kompetenz Partner ---- If my answer is helpful please mark it as answer or press the green arrow.
-
Donnerstag, 6. Dezember 2012 20:31
Hi J P IT,
Here is some recommendation for Replication configuration.
- Its seems like your install Guest OS in wrong place. The default location to store your replicate files it would be in other drive. Since you put inside users\public folder its look weird. FYI, the replicate file will grow very fast every single minute and you putting your files system in risky
- Please use allow replication from the specified server. Add your primary server as replication targets.
Thanks
- Als Antwort markiert Lawrence LvMicrosoft Contingent Staff, Moderator Freitag, 14. Dezember 2012 08:41
- Tag als Antwort aufgehoben J P IT Freitag, 14. Dezember 2012 14:43
-
Donnerstag, 6. Dezember 2012 23:29
Hi Tyler,
Thank you for your consideration
it did work one way primary to DR site but it's not working on from DR site to Primary Site
-
Freitag, 7. Dezember 2012 06:32
Hi J P IT,
Try to setting allow replication from specified server as below:
- Primary site - DR Site
-point target to DR site
- DR Site to - Primary
-point to target to Primary site
- Als Antwort markiert Lawrence LvMicrosoft Contingent Staff, Moderator Freitag, 14. Dezember 2012 08:41
- Tag als Antwort aufgehoben J P IT Freitag, 14. Dezember 2012 14:43
.png)
.png)
