Setup Deployment announcement
-
Link
On 7/8/2008, a security patch was released for DNS by Microsoft and other DNS server vendors. The Microsoft patch was tracked as KB953230 - the documentation on it is here.
As part of the patch, DNS now reserves 2500 UDP ports - including the ports from 64000 to 65000 that WDS uses by default. Because of this, if DNS and WDS are running on the same server, WDS cannot access those ports and so is unable to perform TFTP (required for PXE boot) or Multicast.
To work around this, open the WDS MMC, select your server, and go to Server Properties from the right-click menu or the Action menu. Then on the Network Settings page, set a different range of UDP ports. The best range to choose will depend on what else you are running on your server - you want to pick ports that other server roles and applications are not using. The dynamically allocated ports start from 49152, so your Start port should be at least that.
Filter
:
All threads
All threads
Answered
Unanswered
Proposed answers
General discussion
No replies
Helpful
Has code
All languages
-
Sticky6VotesWDS documentation - published to web!
Hi all, Seeing as there have been several questions around configuring and using Windows Deployment Services, we have produced technical documents to ...4 Replies | 33599 Views | Created by Jez Sadler - MS - Monday, March 26, 2007 5:43 PM | Last reply by Andreas Dietrich - Wednesday, June 26, 2013 6:59 PM
-
Unanswered0VotesIE 11 is not blocked during Automatic Update step.
Greetings. I am experiencing something very strange with our Windows Deployment Servers. I have WDS 2013 with AIK-8.1 combination server to do our machine ...1 Replies | 36 Views | Created by fs2307 - Tuesday, December 17, 2013 1:52 AM | Last reply by Daniel JiSun - 22 minutes ago -
Unanswered0VotesWDS 2012 Deployment
After capturing a sysprep machine I am attempting to boot to the 'Install an Image' boot image. When I boot to it I am presented with the 'Capture image wizard' instead of the Installation wizard ...1 Replies | 34 Views | Created by krjay5 - 21 hours 49 minutes ago | Last reply by Daniel JiSun - 1 hour 9 minutes ago -
Unanswered0VotesWin Svr 2008 - Windows Distribution Services (WDS) - Re-registering WdsImgSrv.dll provider
I've got a Windows Server 2008 Enterprise SP2 server with WDS role enabled. I need and re-register WdsImgSrv.dll provider or, of course, I won't be able and use the image store ...7 Replies | 152 Views | Created by paolod - Thursday, December 05, 2013 3:29 PM | Last reply by paolod - 4 hours 17 minutes ago -
Unanswered0VotesWindows Server 2003 SP2 explicit regression
One of these days I tried to install Windows Server 2003 SP2 on lenovo G555 notebook (AMD platform) for testing purposes, but it stacked on text mode installation at the "Setup ...1 Replies | 36 Views | Created by Svyatpro - Tuesday, December 17, 2013 11:29 AM | Last reply by Michael Shao - 5 hours 3 minutes ago -
Unanswered0VotesProblem with dcpromo on Win8 R2 - "There is not site that corresponds to the IP address of this computer"
We are trying to move to a new cloud provider. A VPN tunnel is set up between the two clouds, and we're trying to promote one of the new servers to a domain controller. The process gets to the point ... -
Answered0Votes"Windows could not parse or process the unattend answer file for pass [specialize]. The settings specified in the answer file cannot be applied. The error was detected while processing settings for component [Microsoft-Windows-Shell-Setup]"
hi guys, could you pls. help me solve the above problem i have encountered, i'm restoring my drive c backup from my email server using vmware, the backup was good and the ...4 Replies | 102 Views | Created by BagongPinoy - Tuesday, December 10, 2013 10:54 AM | Last reply by Amy Wang_ - 11 hours 34 minutes ago -
Answered0VotesError Event ID 2004
Why this error occurs? I created Windows server2008R2 image with SQL server 2008 installed with database i had, then sysprep and when i deployed the image on another server it, i ...6 Replies | 6304 Views | Created by hookedatwallacom - Monday, December 05, 2011 2:10 PM | Last reply by Atamidos - 12 hours 59 minutes ago -
Unanswered0VotesDeployment Workbench Adding Applications Using Task Sequence
I am trying to figure out how to add applications in Deployment Workbench. My biggest issue is what to put in the command line to get it to work. Someone else created folders with everything that ... -
Answered1VotesDHCP WDS Error
Hi. Im having a problem where I get the error 'An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network ...8 Replies | 6681 Views | Created by premierhw - Monday, April 11, 2011 4:15 PM | Last reply by TKjeldsen - Tuesday, December 17, 2013 11:53 AM -
Unanswered0VotesMDT2008 - Updating drivers for LiteTouch boot WIM not working - ifm60x32.sys error screen.
Hello, I have an issue where I have needed to update our LiteTouch Boot WIM with the latest XP drivers for the HP 8300 SFF and HP6470B Notebook range. After ... -
Answered0VotesWhen to add another server?
Hello Community When using Windows Server and the hard disk starts getting full, you can add another hard disk or when you don't have ...1 Replies | 72 Views | Created by Shabeaut - Monday, December 16, 2013 4:57 PM | Last reply by Michael Shao - Tuesday, December 17, 2013 9:33 AM -
Unanswered0VotesServer 2012 R2 - Installing but not configuring WDS role
I would like to install the WDS role on a server but not configure PXE or the DHCP settings until later on this week. We currently have an existing WDS server running on Server 2003 DHCP is not ...2 Replies | 41 Views | Created by Zak Godwin - Monday, December 16, 2013 6:12 PM | Last reply by Shaon Shan - Tuesday, December 17, 2013 9:22 AM -
Answered0VotesReceiving PXE-E53 when trying to PXE boot on different vlan
We are running into a situation where if we try PXE booting a client on any vlan except the one that our WDS server is installed on we receive the "PXE-E53 No boot filename received" ...2 Replies | 60 Views | Created by apophistoledo - Thursday, December 12, 2013 4:32 PM | Last reply by apophistoledo - Monday, December 16, 2013 3:56 PM -
Answered0VotesFinding .inf driver files to add to .wim files
I'm trying to add a driver to a .wim file using ImageX and I realized that you can only add .inf files. How are you supposed to get a Dell network driver that is only provided in a .exe file to ...4 Replies | 3393 Views | Created by egleason3 - Wednesday, October 12, 2011 5:45 PM | Last reply by vilsonH - Monday, December 16, 2013 1:02 PM -
Answered0Votes1st Server - use Hardware RAID or Server 2012 Essentials Storage Pool?
We are a non-profit and received a used dell PowerEdge 2970. We bought Windows Server 2012 Essentials and I am setting up my first server. Using the SAS Config utility I have ...4 Replies | 103 Views | Created by Birdman895 - Monday, December 09, 2013 6:55 PM | Last reply by Shaon Shan - Monday, December 16, 2013 7:24 AM -
Unanswered0Votesinstalling server 2003 R2 from a HD partition
hi, iv'e been rebuilding my workstation and planned on installing windows server 2003 on it, unfortunatly my disk was scratched beyond repair but pulled an iso from the msdn ...2 Replies | 67 Views | Created by jakejordan - Thursday, December 12, 2013 11:30 AM | Last reply by maelwliams - Monday, December 16, 2013 2:21 AM -
Unanswered0VotesI need big help/ I installed PC Cleaner Pro today. Now I can't do anything. I can't get the internet access at all. Plz help?
I have Windows XP, Explorer 8. I got a Trojan W32-Sober last month. That's when all this started. I've talked to several techs on the phone, they all say they can help me if I pay them 4 Million ...1 Replies | 55 Views | Created by kimmy dee - Sunday, December 15, 2013 1:27 AM | Last reply by Dave Patrick - Sunday, December 15, 2013 1:37 AM -
Unanswered0VotesCan't Activate Windows 8 after Image Deployment
Hello, I've got troubles with activating Window 8 after deploying it from my WDS server. Made an Image of a laptop in Audit Mode and activated it before using ...5 Replies | 94 Views | Created by Basvth - Friday, December 13, 2013 7:23 PM | Last reply by DonPick - Sunday, December 15, 2013 12:52 AM -
Unanswered0VotesIBM x3850M2 + LSI 9211-8i
Hi there, I try to install W2K12R2 onto a IBM X3850M2, but the Setup failed with the error message "could not find any drives". I use a LSI ...3 Replies | 79 Views | Created by _vcxy_ - Friday, December 13, 2013 11:46 PM | Last reply by Dave Patrick - Saturday, December 14, 2013 1:54 AM -
Unanswered0VotesHow to add features to an offline VHDX file with powershell
So I am trying to simply add features to an offline image with powershell but seem to get rejected each time. I have read http://technet.microsoft.com/en-us/library/hh831809.aspx but I just ...1 Replies | 143 Views | Created by noob_erik - Friday, December 13, 2013 4:49 AM | Last reply by Tim Cerling - Friday, December 13, 2013 3:22 PM - Items 1 to 20 of 4866 Next ›


