Windows Client TechCenter > Windows 7 Forums > Windows 7 Hardware Compatibility > Corsair 16 GB USB stick not recognized
Ask a questionAsk a question
 

AnswerCorsair 16 GB USB stick not recognized

  • Tuesday, November 03, 2009 4:40 PMTraveling Dave Users MedalsUsers MedalsUsers MedalsUsers MedalsUsers Medals
     

    I have a Sony VGN-FZ320E laptop. I have installed Windows 7 Home Premium. My Corsair 16 GB "Flash Survivor Memory Drive" does not show up as a drive in Windows Explorer.

    In the Device Manager it shows up under "Disk Drives" as "Corsair UFD USB Device".

    In Disk Management it shows up as "Disk 1 - Removable - 15.00 GB - Online". If I right-click it there and select Format, Properties, etc. I get an error message that the "Disk Management console view is not up-to-date..."

    My USB disk drives work fine.

    Ideas?

    --

    Dave

Answers

  • Wednesday, November 04, 2009 7:52 AMDale QiaoMSFT, ModeratorUsers MedalsUsers MedalsUsers MedalsUsers MedalsUsers Medals
     Answer
    Hi,

    Can other USB drives be detected in Windows Explorer? Can it be detected on other computers? Please check if the flash drive is assigned with a letter in Disk Management, you can assign it with a new letter and then reflash the Disk Management to see if it works. To do this, please refer to the following steps:

    1.right click on the particular partition.
    2.choose Change Drive Letter and Paths.
    3.assign a system available drive to the partition.
    4.click OK.
    5.press F5 to reflash the apperance.
    6.open Windows Explorer to see if it is recognized.

    Best Regards
    Dale

All Replies

  • Wednesday, November 04, 2009 7:52 AMDale QiaoMSFT, ModeratorUsers MedalsUsers MedalsUsers MedalsUsers MedalsUsers Medals
     Answer
    Hi,

    Can other USB drives be detected in Windows Explorer? Can it be detected on other computers? Please check if the flash drive is assigned with a letter in Disk Management, you can assign it with a new letter and then reflash the Disk Management to see if it works. To do this, please refer to the following steps:

    1.right click on the particular partition.
    2.choose Change Drive Letter and Paths.
    3.assign a system available drive to the partition.
    4.click OK.
    5.press F5 to reflash the apperance.
    6.open Windows Explorer to see if it is recognized.

    Best Regards
    Dale
  • Tuesday, November 10, 2009 2:08 AMslaval Users MedalsUsers MedalsUsers MedalsUsers MedalsUsers Medals
     
    Hello,
    I have exact same issue with Windows-7 Professional recognizing Corsair 16gig Voyager USB Flash drive. All other drives such s ScanDisk and Sony are recognized without problems. Also, it is not possible to go through steps 1 through 6 because drive is recognized for 2-3 seconds then disappears, to only reappear few seconds later. Thus appearing/disappearing continuously without getting properly recognized. I have conneted with Corsair, only to be reverted back to Microsoft for correct drives for WIndows-7.
    P.S. THis same Corsair 16gig Voyager Flash workes perfectly fine with Windows XP-32 and XP-64