Error 80070570 while installing Windows 8 CP

• Sunday, March 18, 2012 11:19 PM

   

   
  

  1

  I have downloaded the Windows 8 CP iso, and have validated the
  download checksum (actually done this twice). I have tried installing
  from both a DVD and from a USB key, with identical results. Error
  80070570 occurs while expanding files at about 15% or so. I have tried
  unplugging everything except for the keyboard and mouse. The results
  are the same every time. The installation is onto a new hard drive and
  an empty partition on that drive. The one significant installation
  point is that a driver has to be loaded before doing the setup, since
  the hard drive is on a SATA controller which is not natively supported by the setup. But
  after loading that driver, setup finds the controller and the drives on
  it, and is happy to install there. In fact, the setup logs below are
  written on that drive.

  Computer is a Dell Studio XPS 9000 with 12GB of memory, and two different SATA controllers (one RAID - on motherboard). The BIOS SATA mode is set to "RAID" which is required because of the RAID array on one of the two controllers.

  The setup error log is below:

  2012-03-19 06:15:45, Error [0x0600af] IBS ApplyWIMCallback:
  Error applying
  O:\Windows\WinSxS\amd64_mcx2.inf_31bf3856ad364e35_6.2.8250.0_none_4179f9bc60f8b120\Mcx2.inf.
  GLE [1392][gle=0x00000570]
  2012-03-19 06:15:45, Error [0x0606cc] IBS WIMApplyImage failed; hr = 0x80070570[gle=0x00000570]
  2012-03-19 06:15:45, Error [0x0600a1] IBS DeployImage:Image application failed; hr = 0x80070570[gle=0x00000570]
  2012-03-19
  06:15:45, Error [0x060082] IBS Callback_ImageTransfer:Failed to
  lay down the OS image; hr = 0x80070570[gle=0x00000570]

  However, this is the setup log from around the error (the full setup log is too long to post here (about 315000 characters long):
  

  2012-03-19 06:10:41, Info SetupSetVolume: Marking [O:\] for tracking as [InstallVolume]
  2012-03-19
  06:10:41, Info [0x06021f] IBS Callback_PrepareSystemVolume:
  Current Setup phase is 2 (had started from phase 2)
  2012-03-19 06:10:41, Info [0x060220] IBS Callback_PrepareSystemVolume: Gathering information required to boot Windows.
  2012-03-19
  06:10:41, Info IBS GetMachineInfo found boot
  disk/partition information on black board. Boot disk number [0] parition
  offset = [0x3c3f00000]
  2012-03-19 06:10:41, Info
  IBSLIB Compliance checks found a boot disk 0 that contains a system
  volume at offset [0x3c3f00000] and meets criteria
  2012-03-19 06:10:41, Info IBSLIB Disk is compliant for this operation
  2012-03-19 06:10:41, Info IBS PrepareVolumeAsSystemVol: Found system volume
  2012-03-19 06:10:41, Info IBSLIB Disk is compliant for this operation
  2012-03-19
  06:10:41, Info IBS GetMachineInfo found boot
  disk/partition information on black board. Boot disk number [0] parition
  offset = [0x3c3f00000]
  2012-03-19 06:10:41, Info SetupSetVolume: Marking [C:\] for tracking as [SystemVolume]
  2012-03-19 06:10:41, Info SetupSetVolume: Marking [O:\] for tracking as [TildeBTVolume]
  2012-03-19
  06:10:41, Info IBS Callback_Engine_ReInitialize:New
  working directory is [O:\$WINDOWS.~BT\Sources\Panther]
  2012-03-19 06:10:41, Info IBS Callback_Engine_ReInitialize:Successfully intialized the panther engine.
  2012-03-19 06:10:41, Info [0x060287] IBS Setup was started at 2012-03-19 06:00:21
  2012-03-19 06:10:41, Info [0x060288] IBS Install Source is X:\Sources
  2012-03-19 06:10:41, Info IBS Build version is 6.2.8250.0 (winmain_win8beta.120217-1520)
  2012-03-19
  06:10:41, Info [0x06403f] IBSLIB CreateSetupBlackboard:Creating a
  new persistent blackboard. Path is
  [O:\$WINDOWS.~BT\Sources\Panther\SetupInfo] Setup phase is [2]
  2012-03-19 06:10:41, Info [0x090008] PANTHR CBlackboard::Open: O:\$WINDOWS.~BT\Sources\Panther\SetupInfo succeeded.
  2012-03-19
  06:10:41, Info [0x064043] IBSLIB
  CreateSetupBlackboard:Successfully created/opened Setup black board path
  is [O:\$WINDOWS.~BT\Sources\Panther\SetupInfo]
  2012-03-19 06:10:42, Info [0x090009] PANTHR CBlackboard::Close: x:\windows\panther\setupinfo.
  2012-03-19
  06:10:42, Info IBS
  Callback_Engine_ReInitialize:Successfully created a persistent
  blackboard and copied all the data.
  2012-03-19 06:10:42, Info SetupSetVolume: Marking [O:\] for tracking as [TildeLSVolume]
  2012-03-19
  06:10:42, Info [0x060109] IBS CreateSetupLocalFolder:
  Successfully created local sources folder tree at
  [O:\$WINDOWS.~LS\Sources]
  2012-03-19 06:10:42, Info [0x0600f3]
  IBS CallBack_PickTempDrive_CreateSetupLocalFolder:Successfully
  created the local sources folder.
  2012-03-19 06:10:42, Info [0x06050f] IBS Entering Callback_Rollback_InitializeRollback
  2012-03-19 06:10:42, Info [0x064147] IBSLIB RollbackInitialize in progress...
  2012-03-19 06:10:42, Info [0x064148] IBSLIB RollbackInitialize finished.
  2012-03-19 06:10:42, Info [0x06412c] IBSLIB SetCheckpoint: Checkpoint("StartPhaseCleanUpCheckpoint") in progress...
  2012-03-19
  06:10:42, Info IBSLIB TrackVolume: Successfully marked
  that [$Setup_BTFolderVolume$] is on drive [O:].
  2012-03-19 06:10:42,
  Info IBSLIB TrackVolume: Successfully marked that
  [$Setup_LSFolderVolume$] is on drive [O:].
  2012-03-19 06:10:42, Info [0x06412e] IBSLIB SetCheckpoint: Checkpoint "StartPhaseCleanUpCheckpoint" successfully set.
  2012-03-19 06:10:42, Info [0x06412c] IBSLIB SetCheckpoint: Checkpoint("WinPEPrepareInstallDriveCheckpoint") in progress...
  2012-03-19
  06:10:42, Info IBSLIB TrackVolume: Successfully marked
  that [$Setup_InstallVolume$] is on drive [O:].
  2012-03-19 06:10:42,
  Info [0x06412e] IBSLIB SetCheckpoint: Checkpoint
  "WinPEPrepareInstallDriveCheckpoint" successfully set.
  2012-03-19
  06:10:42, Info [0x06412c] IBSLIB SetCheckpoint:
  Checkpoint("StartPhaseSystemVolumeSelectedCheckpoint") in progress...
  2012-03-19 06:10:42, Info IBSLIB TrackVolume: Successfully marked that [$Setup_SystemVolume$] is on drive [C:].
  2012-03-19
  06:10:42, Warning [0x0606cc] IBS DeleteFileEx: Unable to clear
  out attributes on [O:\$WINDOWS.~BT\Sources\Rollback\bootsec.dat]; GLE =
  0x2
  2012-03-19 06:10:42, Info [0x064157] IBSLIB CSystemVolumeSelectionCheckpoint: Successfully saved Boot Sector.
  2012-03-19 06:10:42, Info [0x0606cc] IBS GetSystemDiskNTPath: Found system disk at [\Device\Harddisk0\DR0].
  2012-03-19 06:10:42, Info [0x0606cc] IBS GetSystemDiskNumber: Disk [0] is the system disk.
  2012-03-19 06:10:42, Info [0x064159] IBSLIB CSystemVolumeSelectionCheckpoint: Successfully saved MBR.
  2012-03-19 06:10:42, Info [0x06415c] IBSLIB CSystemVolumeSelectionCheckpoint: C:\boot.ini does not exist, skip.
  2012-03-19 06:10:42, Info [0x06415c] IBSLIB CSystemVolumeSelectionCheckpoint: C:\ntldr does not exist, skip.
  2012-03-19 06:10:42, Info [0x06415c] IBSLIB CSystemVolumeSelectionCheckpoint: C:\NTDETECT.COM does not exist, skip.
  2012-03-19
  06:10:42, Info [0x06415e] IBSLIB
  CSystemVolumeSelectionCheckpoint: Successfully copied "C:\bootmgr" to
  "O:\$WINDOWS.~BT\Sources\Rollback\bootmgr".
  2012-03-19 06:10:44, Info IBSLIB CSystemVolumeSelectionCheckpoint: Successfully saved BCD[C:\Boot\BCD].
  2012-03-19 06:10:44, Info [0x06415f] IBSLIB CSystemVolumeSelectionCheckpoint: Successfully saved "C:\Boot".
  2012-03-19
  06:10:44, Info [0x06412e] IBSLIB SetCheckpoint: Checkpoint
  "StartPhaseSystemVolumeSelectedCheckpoint" successfully set.
  2012-03-19 06:10:44, Info [0x06412c] IBSLIB SetCheckpoint: Checkpoint("WinPEBootFilesRestoreCheckpoint") in progress...
  2012-03-19 06:10:44, Info [0x06412e] IBSLIB SetCheckpoint: Checkpoint "WinPEBootFilesRestoreCheckpoint" successfully set.
  2012-03-19 06:10:44, Info [0x060510] IBS Leaving Callback_Rollback_InitializeRollback (success)
  2012-03-19 06:10:44, Info IBS ResumeUnfinishedSourcesDownloadJob: Enter....
  2012-03-19
  06:10:44, Info IBS
  ResumeUnfinishedSourcesDownloadJob: Current setup phase is not
  downlevel. There's nothing to do.
  2012-03-19 06:10:44, Info
  SetupCopyQueueAdd:Not adding [E:\Sources\install.wim] on
  media [0] to Setup copy queue.
  2012-03-19 06:10:44, Info
  IBS Callback_AddOSImageToCopyQueue:Successfully added Windows
  image files to Setup copy queue.
  2012-03-19 06:10:44, Info IBS CallBack_LanguagePack_AddToSetupCopyQueue:Target language is [en-US]
  2012-03-19
  06:10:44, Info IBS
  CallBack_LanguagePack_AddToSetupCopyQueue:Language [en-US] is already
  installed in image. Not adding it to copy queue.
  2012-03-19
  06:10:44, Info IBS InitCopySetupFiles:Successfully
  published event requesting modules to add files to copy queue.
  2012-03-19 06:10:44, Info IBS InitCopySetupFiles:Total bytes needed to copy [0]
  2012-03-19 06:10:44, Info [0x0a0023] UI progress task ProgressInfo\CopySetupFiles : StartProgress
  2012-03-19 06:10:44, Info IBS CopySetupFiles:Copied any files from media '#0
  2012-03-19 06:10:44, Info [0x0a0024] UI progress task ProgressInfo\CopySetupFiles : EndProgress
  2012-03-19 06:10:44, Info [0x060389] IBS CallBack_CreatePageFile:Page file path is [\??\O:\WinPEpge.sys]
  2012-03-19
  06:10:44, Info [0x06038a] IBS CallBack_CreatePageFile:Page
  file [\??\O:\WinPEpge.sys] already exists, trying to delete it
  2012-03-19 06:10:44, Info [0x06412c] IBSLIB SetCheckpoint: Checkpoint("WinPECreatePagefileStartCheckpoint") in progress...
  2012-03-19
  06:10:44, Info [0x06412e] IBSLIB SetCheckpoint: Checkpoint
  "WinPECreatePagefileStartCheckpoint" successfully set.
  2012-03-19 06:10:44, Info [0x06412c] IBSLIB SetCheckpoint: Checkpoint("WinPECreatePagefileDoneCheckpoint") in progress...
  2012-03-19
  06:10:44, Info [0x06412e] IBSLIB SetCheckpoint: Checkpoint
  "WinPECreatePagefileDoneCheckpoint" successfully set.
  2012-03-19
  06:10:44, Info [0x06038c] IBS
  CallBack_CreatePageFile:Successfully created paging file at
  [\??\O:\WinPEpge.sys]
  2012-03-19 06:10:44, Info [0x0640d2] IBSLIB [Setup Disk Usage] ------ Drive O: ------
  2012-03-19 06:10:44, Info [0x0640d3] IBSLIB [Setup Disk Usage] Total bytes on drive: 715048.0 MB (749782167552 bytes)
  2012-03-19
  06:10:44, Info [0x0640d4] IBSLIB [Setup Disk Usage] Free bytes
  available to user: 714300.4 MB (748998270976 bytes)
  2012-03-19 06:10:44, Info [0x0640d6] IBSLIB [Setup Disk Usage] Found Setup folder/file [BT Folder ].
  2012-03-19 06:10:44, Info [0x0640d6] IBSLIB [Setup Disk Usage] Found Setup folder/file [LS Folder ].
  2012-03-19 06:10:44, Info [0x060093] IBS DeployOSImage:Successfully opened and resolved image
  2012-03-19 06:10:44, Info [0x060095] IBS DeployOSImage:Destination drive = O:\
  2012-03-19 06:10:44, Info [0x0a0023] UI progress task ProgressInfo\TransferFinalImage : StartProgress
  2012-03-19 06:10:45, Info [0x0606cc] IBS Calling WIMApplyImage (flags = 0x108)...
  2012-03-19
  06:10:45, Info IBS PopulateRootPathsOnBBCallBack:
  Detected root file/folder [bootmgr] in OS image.
  2012-03-19 06:10:45,
  Info IBS PopulateRootPathsOnBBCallBack: Detected
  root file/folder [BOOTNXT] in OS image.
  2012-03-19 06:10:45, Info
  IBS PopulateRootPathsOnBBCallBack: Detected root
  file/folder [Documents and Settings] in OS image.
  2012-03-19
  06:10:45, Info IBS PopulateRootPathsOnBBCallBack:
  Detected root file/folder [$Recycle.Bin\] in OS image.
  2012-03-19
  06:10:45, Info IBS PopulateRootPathsOnBBCallBack:
  Detected root file/folder [PerfLogs\] in OS image.
  2012-03-19
  06:10:45, Info IBS PopulateRootPathsOnBBCallBack:
  Detected root file/folder [Program Files\] in OS image.
  2012-03-19
  06:10:45, Info IBS PopulateRootPathsOnBBCallBack:
  Detected root file/folder [Program Files (x86)\] in OS image.
  2012-03-19
  06:10:45, Info IBS PopulateRootPathsOnBBCallBack:
  Detected root file/folder [ProgramData\] in OS image.
  2012-03-19 06:10:45, Info IBS PopulateRootPathsOnBBCallBack: Detected root file/folder [Users\] in OS image.
  2012-03-19
  06:10:45, Info IBS PopulateRootPathsOnBBCallBack:
  Detected root file/folder [Windows\] in OS image.
  2012-03-19
  06:10:45, Info IBS MoveOldOSFiles:File/folder
  [O:\bootmgr] doesn't exist; no need to move it before applying image.
  2012-03-19
  06:10:45, Info IBS MoveOldOSFiles:File/folder
  [O:\BOOTNXT] doesn't exist; no need to move it before applying image.
  2012-03-19
  06:10:45, Info IBS MoveOldOSFiles:File/folder
  [O:\Documents and Settings] doesn't exist; no need to move it before
  applying image.
  2012-03-19 06:10:45, Info [0x06412c] IBSLIB
  SetCheckpoint:
  Checkpoint("WinPEArchiveOldWindowsFoldersStartCheckpoint") in
  progress...
  2012-03-19 06:10:45, Info [0x06412e] IBSLIB
  SetCheckpoint: Checkpoint "WinPEArchiveOldWindowsFoldersStartCheckpoint"
  successfully set.
  2012-03-19 06:10:45, Info [0x0600a6] IBS
  MoveOldOSFiles:Successfully moved [O:\$Recycle.Bin\] to
  [O:\Windows.old\$Recycle.Bin\]
  2012-03-19 06:10:45, Info
  IBS MoveOldOSFiles:File/folder [O:\PerfLogs\] doesn't exist; no
  need to move it before applying image.
  2012-03-19 06:10:45, Info
  IBS MoveOldOSFiles:File/folder [O:\Program Files\]
  doesn't exist; no need to move it before applying image.
  2012-03-19
  06:10:45, Info IBS MoveOldOSFiles:File/folder
  [O:\Program Files (x86)\] doesn't exist; no need to move it before
  applying image.
  2012-03-19 06:10:45, Info IBS
  MoveOldOSFiles:File/folder [O:\ProgramData\] doesn't exist; no need to
  move it before applying image.
  2012-03-19 06:10:45, Info
  IBS MoveOldOSFiles:File/folder [O:\Users\] doesn't exist; no
  need to move it before applying image.
  2012-03-19 06:10:45, Info
  IBS MoveOldOSFiles:File/folder [O:\Windows\] doesn't
  exist; no need to move it before applying image.
  2012-03-19 06:10:45,
  Info [0x06412c] IBSLIB SetCheckpoint:
  Checkpoint("WinPEArchiveOldWindowsFoldersDoneCheckpoint") in progress...
  2012-03-19
  06:10:45, Info [0x06412e] IBSLIB SetCheckpoint: Checkpoint
  "WinPEArchiveOldWindowsFoldersDoneCheckpoint" successfully set.
  2012-03-19 06:10:45, Info [0x06412c] IBSLIB SetCheckpoint: Checkpoint("WinPEImageApplyReadyCheckpoint") in progress...
  2012-03-19 06:10:45, Info [0x06412e] IBSLIB SetCheckpoint: Checkpoint "WinPEImageApplyReadyCheckpoint" successfully set.
  2012-03-19 06:10:45, Info [0x06009e] IBS DeployWIMImage:Calling IDepWIMImageResolved::Apply...
  2012-03-19 06:10:46, Info [0x0606cc] IBS Calling WIMApplyImage (flags = 0x180)...
  2012-03-19
  06:15:43, Info [0x0600ae] IBS ApplyWIMCallback: Retrying on
  file
  [O:\Windows\WinSxS\amd64_mcx2.inf_31bf3856ad364e35_6.2.8250.0_none_4179f9bc60f8b120\Mcx2.inf]
  GLE is [1392]
  2012-03-19 06:15:43, Info [0x0600ae] IBS
  ApplyWIMCallback: Retrying on file
  [O:\Windows\WinSxS\amd64_mcx2.inf_31bf3856ad364e35_6.2.8250.0_none_4179f9bc60f8b120\Mcx2.inf]
  GLE is [1392]
  2012-03-19 06:15:44, Info [0x0600ae] IBS
  ApplyWIMCallback: Retrying on file
  [O:\Windows\WinSxS\amd64_mcx2.inf_31bf3856ad364e35_6.2.8250.0_none_4179f9bc60f8b120\Mcx2.inf]
  GLE is [1392]
  2012-03-19 06:15:44, Info [0x0600ae] IBS
  ApplyWIMCallback: Retrying on file
  [O:\Windows\WinSxS\amd64_mcx2.inf_31bf3856ad364e35_6.2.8250.0_none_4179f9bc60f8b120\Mcx2.inf]
  GLE is [1392]
  2012-03-19 06:15:45, Error [0x0600af] IBS
  ApplyWIMCallback: Error applying
  O:\Windows\WinSxS\amd64_mcx2.inf_31bf3856ad364e35_6.2.8250.0_none_4179f9bc60f8b120\Mcx2.inf.
  GLE [1392][gle=0x00000570]
  2012-03-19 06:15:45, Error [0x0606cc] IBS WIMApplyImage failed; hr = 0x80070570[gle=0x00000570]
  2012-03-19 06:15:45, Error [0x0600a1] IBS DeployImage:Image application failed; hr = 0x80070570[gle=0x00000570]
  2012-03-19
  06:15:45, Error [0x060082] IBS Callback_ImageTransfer:Failed to
  lay down the OS image; hr = 0x80070570[gle=0x00000570]
  2012-03-19
  06:15:45, Info IBSLIB PublishCriticalError: Publishing
  critical error message [Windows cannot install required files. The file
  may be corrupt or missing. Make sure all files required for installation
  are available, and restart the installation. Error code: 0x80070570]
  2012-03-19 06:15:45, Info [0x0a013d] UI Accepting Cancel. Exiting Page Progress.
  2012-03-19 06:15:45, Info UI Entering Page Cancel.
  2012-03-19 06:15:45, Info [0x0a0035] UI Allowing Page 'Drive Selection' to be shown
  2012-03-19 06:15:45, Info [0x0a0035] UI Allowing Page 'Drive Selection' to be shown
  2012-03-19 06:15:45, Info [0x0a011c] UI WizardDialogPost::SetActive
  2012-03-19
  06:18:35, Info IBS
  Callback_Rollback_ExecuteOnlineRollback: Executing
  [E:\Sources\rollback.exe /CleanInstallFromWinPE /noui
  /BTFolder:O:\$WINDOWS.~BT\Sources]...
  2012-03-19 06:19:29, Info IBS Callback_Rollback_ExecuteOnlineRollback: Rollback.exe exited with code 0x0
  2012-03-19
  06:19:29, Info [0x070042] DIAG CallBack_DiagnosticDataSend:
  Called with notification for Error published by ErrorHandler
  2012-03-19 06:19:29, Info [0x0a0023] UI progress task ProgressInfo\SendDiagnostics : StartProgress
  2012-03-19
  06:19:29, Info DIAG StartNetworking: Networking is
  NOT already initialized, so we will try to initialize it
  2012-03-19 06:19:29, Info DIAG StartNetworking: WpeSetComputerName Succeeded
  2012-03-19 06:19:37, Info DIAG StartNetworking: AutoProxy successfully initialized
  2012-03-19
  06:19:40, Info DIAG DiagnosticDataSendWorker:
  Phase=2 Start time was 0X30577CCF5, End time was 0X30577D17C, total time
  was 0X487
  2012-03-19 06:19:40, Info [0x070044] DIAG DiagnosticDataSendWorker: startSetupTimeInSecs = 0X305775C75
  2012-03-19 06:19:40, Info [0x070045] DIAG Processing Diagnostic data at 2012-03-19 06:19:40
  2012-03-19 06:19:40, Info [0x070046] DIAG DiagnosticDataSendWorker: endSetupTimeInSecs = 0X3057760FC
  2012-03-19 06:19:40, Info DIAG DiagnosticDataSendWorker: setupInstallTime = 0X487
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=2837, DataPointData=1
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=846, DataPointData=2
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=438, DataPointData=0
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=437, DataPointData=0
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=323, DataPointData=8
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=1297, DataPointData=14
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=342, DataPointData=2
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=6935, DataPointData=-1
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=765, DataPointData=1
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=9309, DataPointData=1
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=5809, DataPointData=1
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=2340, DataPointData=0
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=337, DataPointData=6
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=338, DataPointData=2
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=334, DataPointData=8250
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=1501, DataPointData=120217
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=1089, DataPointData=0
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=1088, DataPointData=9
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=578, DataPointData=-203802440
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=335, DataPointData=2033969996
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=1516, DataPointData=577600521
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=320, DataPointData=12573656
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=319, DataPointData=8
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=326, DataPointData=3201
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=318, DataPointData=198
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=324, DataPointData=9
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=327, DataPointData=64
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=2339, DataPointData=0
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=2189, DataPointData=1
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=842, DataPointData=105
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=331, DataPointData=1159
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=835, DataPointData=0
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=761, DataPointData=1159
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=719, DataPointData=0
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=720, DataPointData=0
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=721, DataPointData=0
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=722, DataPointData=0
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=723, DataPointData=0
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=724, DataPointData=0
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=725, DataPointData=0
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=726, DataPointData=0
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=727, DataPointData=0
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=728, DataPointData=0
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=579, DataPointData=2
  2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=306, DataPointData=1
  2012-03-19 06:19:40, Info [0x070019] DIAG SetDwordValuesFromBB: Exiting SetDwordValuesFromBB with return=0
  2012-03-19 06:19:40, Info DIAG SetStringValuesFromBB: Setting DataPointID=440, DataPointData=winmain_win8beta
  2012-03-19 06:19:40, Info DIAG SetStringValuesFromBB: Setting DataPointID=874, DataPointData=PRERELEASE
  2012-03-19 06:19:40, Info [0x07001a] DIAG SetStringValuesFromBB: Exiting SetStringValuesFromBB with return=0
  2012-03-19 06:19:40, Info [0x070019] DIAG SetDwordValuesFromBB: Exiting SetDwordValuesFromBB with return=0
  2012-03-19 06:19:40, Info [0x07001a] DIAG SetStringValuesFromBB: Exiting SetStringValuesFromBB with return=0
  2012-03-19 06:19:40, Info [0x07008e] DIAG SetStreamValuesFromBB: Exiting SetStreamValuesFromBB with return=0
  2012-03-19
  06:19:40, Info [0x070010] DIAG SetFromFile: Opened
  file=O:\$WINDOWS.~BT\Sources\Panther\diagerr.xml for reading SQM values
  2012-03-19
  06:19:40, Info [0x070069] DIAG SetFromFile: UMID 0x0600af in
  ApplyWIMCallback, line number 2393, occurred 1 times
  2012-03-19 06:19:40, Info [0x070069] DIAG SetFromFile: UMID 0x0606cc in LogCallback, line number 2262, occurred 1 times
  2012-03-19
  06:19:40, Info [0x070069] DIAG SetFromFile: UMID 0x0600a1 in
  DeployWIMImage, line number 1639, occurred 1 times
  2012-03-19
  06:19:40, Info [0x070069] DIAG SetFromFile: UMID 0x060082 in
  Callback_DeployImage, line number 537, occurred 1 times
  2012-03-19
  06:19:40, Info [0x070012] DIAG SetFromFile: Read 4 SQM Values
  from O:\$WINDOWS.~BT\Sources\Panther\diagerr.xml
  2012-03-19 06:19:40,
  Info [0x070010] DIAG SetFromFile: Opened
  file=O:\$WINDOWS.~BT\Sources\Panther\diagwrn.xml for reading SQM values
  2012-03-19 06:19:40, Info [0x070069] DIAG SetFromFile: UMID 0x0606cc in LogCallback, line number 2262, occurred 9 times
  2012-03-19
  06:19:40, Info [0x070069] DIAG SetFromFile: UMID 0x0a0000 in
  CallbackAppCompatProgress, line number 1254, occurred 1 times
  2012-03-19
  06:19:40, Info [0x070069] DIAG SetFromFile: UMID 0x070026 in
  CAccessWMI::LogErrorMessage, line number 94, occurred 2 times
  2012-03-19
  06:19:40, Info [0x070012] DIAG SetFromFile: Read 12 SQM Values
  from O:\$WINDOWS.~BT\Sources\Panther\diagwrn.xml
  2012-03-19 06:19:40,
  Info DIAG Successfully ended SQM session in
  O:\$WINDOWS.~BT\Sources\Panther\sqmSetup.sqm file, FileSize=1448 bytes
  2012-03-19
  06:19:40, Info DIAG Starting to upload SQM file =
  O:\$WINDOWS.~BT\Sources\Panther\sqmSetup.sqm to
  URL=http://sqm.microsoft.com/sqm/windows/sqmserver.dll
  2012-03-19 06:19:40, Info DIAG 1 SQM files sent for upload. Waiting for upload now
  2012-03-19 06:19:40, Info [0x070001] DIAG HRESULT=0x80070002
  2012-03-19 06:19:40, Info [0x070002] DIAG filePath=O:\$WINDOWS.~BT\Sources\Panther\sqmSetup.sqm
  2012-03-19 06:19:40, Info [0x070003] DIAG httpResponse=500
  2012-03-19
  06:19:40, Info [0x070005] DIAG SQM
  file=O:\$WINDOWS.~BT\Sources\Panther\sqmSetup.sqm COULD NOT be uploaded,
  Err=2, httpResponse=500
  2012-03-19 06:19:40, Info
  DIAG Sqm file successfully registered at
  HKLM\Software\Microsoft\SQMClient\Windows\Uploader\PendingUpload!O:\$WINDOWS.~BT\Sources\Panther\sqmSetup.sqm:0
  2012-03-19
  06:19:44, Info DIAG SQM File
  O:\$WINDOWS.~BT\Sources\Panther\sqmSetup.sqm - Wait for upload complete
  2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: ReportType = 1
  2012-03-19
  06:19:44, Info DIAG
  ObtainBucketingParamsFromLogFile: Opened
  diagerr.xml=O:\$WINDOWS.~BT\Sources\Panther\diagerr.xml for reading
  errors
  2012-03-19 06:19:44, Info DIAG ObtainBucketingParamsFromLogFile: Extracted UMIDStr=33947823
  2012-03-19 06:19:44, Info DIAG ObtainBucketingParamsFromLogFile: Found UMID[0]=600af
  2012-03-19 06:19:44, Info DIAG ObtainBucketingParamsFromLogFile: Extracted UMIDStr=33949388
  2012-03-19 06:19:44, Info DIAG ObtainBucketingParamsFromLogFile: Found UMID[1]=606cc
  2012-03-19 06:19:44, Info DIAG ObtainBucketingParamsFromLogFile: Extracted UMIDStr=42336417
  2012-03-19 06:19:44, Info DIAG ObtainBucketingParamsFromLogFile: Found UMID[2]=600a1
  2012-03-19 06:19:44, Info DIAG ObtainBucketingParamsFromLogFile: Extracted UMIDStr=33947778
  2012-03-19 06:19:44, Info DIAG ObtainBucketingParamsFromLogFile: Found UMID[3]=60082
  2012-03-19 06:19:44, Info DIAG ObtainBucketingParamsFromLogFile: Number of Errors in log = 4
  2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[0]=winmain_win8beta
  2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[1]=8250
  2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[2]=1
  2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[3]=1
  2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[4]=2
  2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[5]=9
  2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[6]=PRERELEASE
  2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[7]=X
  2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[8]=600af
  2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[9]=60082
  2012-03-19
  06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
  Files To Add[0]=O:\$WINDOWS.~BT\Sources\Panther\setupact.log
  2012-03-19
  06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
  Files To Add[1]=O:\$WINDOWS.~BT\Sources\Panther\diagerr.xml
  2012-03-19
  06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
  Files To Add[2]=O:\$WINDOWS.~BT\Sources\Panther\cbs.log
  2012-03-19
  06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
  Files To Add[3]=O:\$WINDOWS.~BT\Sources\Panther\shellsetup.log
  2012-03-19
  06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
  Files To Add[4]=O:\$WINDOWS.~BT\Sources\Panther\setupmem.dmp
  2012-03-19
  06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
  Files To Add[5]=O:\$WINDOWS.~BT\Sources\Panther\..\inf\setupapi.app.log
  2012-03-19
  06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
  Files To Add[6]=O:\$WINDOWS.~BT\Sources\Panther\..\inf\setupapi.dev.log
  2012-03-19
  06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
  Files To
  Add[7]=O:\$WINDOWS.~BT\Sources\Panther\..\inf\setupapi.offline.log
  2012-03-19
  06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
  Files To Add[8]=O:\$WINDOWS.~BT\Sources\Panther\..\rollback\setupmem.dmp
  2012-03-19
  06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
  Files To
  Add[9]=O:\$WINDOWS.~BT\Sources\Panther\setupapi\setupapi.app.log
  2012-03-19
  06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
  Files To
  Add[10]=O:\$WINDOWS.~BT\Sources\Panther\setupapi\setupapi.dev.log
  2012-03-19
  06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
  Files To
  Add[11]=O:\$WINDOWS.~BT\Sources\Panther\setupapi\setupapi.offline.log
  2012-03-19 06:19:44, Info DIAG Going to do Error Reporting for Event Name=WinSetupDiag01
  2012-03-19 06:19:44, Info DIAGER DiagERInitialize:Entry Also Initialized the log
  2012-03-19 06:19:44, Info DIAGER IDiagER::IDiagER:Entry
  2012-03-19 06:19:44, Info DIAGER CWfpER::Initialize:Entry
  2012-03-19 06:19:44, Info DIAGER CWfpER::Initialize:Entry
  2012-03-19 06:19:44, Info DIAGER Changing Report Type from Critical To Non Critical to support silent mode
  2012-03-19
  06:19:44, Info DIAGER Consent Value =
  HKCU\Software\Microsoft\Windows\Windows Error
  Reporting\Consent!WinSetupDiag01 has been set to 4
  2012-03-19 06:19:44, Info DIAGER DiagERAddBucketingParameters:Entry
  2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Entry
  2012-03-19 06:19:44, Info DIAGER IDiagER::AddBucketingParameters:Entry
  2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=winmain_win8beta
  2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=8250
  2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=1
  2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=1
  2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=2
  2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=9
  2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=PRERELEASE
  2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=X
  2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=600af
  2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=60082
  2012-03-19 06:19:44, Info DIAGER DiagERSetHeader:Entry
  2012-03-19 06:19:44, Info DIAGER CWfpER::SetHeader:Entry
  2012-03-19 06:19:44, Info DIAGER IDiagER::SetHeader:Entry
  2012-03-19
  06:19:44, Info DIAGER CWfpER::SetHeader:Setting
  header=Microsoft Windows Installation encountered a problem and needs to
  close. We are sorry for the inconvenience
  2012-03-19 06:19:44, Info DIAGER DiagERAddFiles:Entry
  2012-03-19 06:19:44, Info DIAGER CWfpER::AddFiles:Entry
  2012-03-19 06:19:44, Info DIAGER IDiagER::AddFiles:Entry
  2012-03-19 06:19:44, Info DIAGER CWfpER::AddFiles:Adding file=O:\$WINDOWS.~BT\Sources\Panther\setupact.log
  2012-03-19 06:19:44, Info DIAGER CWfpER::AddFiles:Adding file=O:\$WINDOWS.~BT\Sources\Panther\diagerr.xml
  2012-03-19 06:19:44, Info DIAGER CWfpER::AddFiles:Adding file=O:\$WINDOWS.~BT\Sources\Panther\cbs.log
  2012-03-19
  06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
  file=O:\$WINDOWS.~BT\Sources\Panther\cbs.log, Result=2
  2012-03-19 06:19:44, Info DIAGER CWfpER::AddFiles:Adding file=O:\$WINDOWS.~BT\Sources\Panther\shellsetup.log
  2012-03-19
  06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
  file=O:\$WINDOWS.~BT\Sources\Panther\shellsetup.log, Result=2
  2012-03-19 06:19:44, Info DIAGER CWfpER::AddFiles:Adding file=O:\$WINDOWS.~BT\Sources\Panther\setupmem.dmp
  2012-03-19
  06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
  file=O:\$WINDOWS.~BT\Sources\Panther\setupmem.dmp, Result=2
  2012-03-19
  06:19:44, Info DIAGER CWfpER::AddFiles:Adding
  file=O:\$WINDOWS.~BT\Sources\Panther\..\inf\setupapi.app.log
  2012-03-19
  06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
  file=O:\$WINDOWS.~BT\Sources\Panther\..\inf\setupapi.app.log, Result=2
  2012-03-19
  06:19:44, Info DIAGER CWfpER::AddFiles:Adding
  file=O:\$WINDOWS.~BT\Sources\Panther\..\inf\setupapi.dev.log
  2012-03-19
  06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
  file=O:\$WINDOWS.~BT\Sources\Panther\..\inf\setupapi.dev.log, Result=2
  2012-03-19
  06:19:44, Info DIAGER CWfpER::AddFiles:Adding
  file=O:\$WINDOWS.~BT\Sources\Panther\..\inf\setupapi.offline.log
  2012-03-19
  06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
  file=O:\$WINDOWS.~BT\Sources\Panther\..\inf\setupapi.offline.log,
  Result=2
  2012-03-19 06:19:44, Info DIAGER
  CWfpER::AddFiles:Adding
  file=O:\$WINDOWS.~BT\Sources\Panther\..\rollback\setupmem.dmp
  2012-03-19
  06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
  file=O:\$WINDOWS.~BT\Sources\Panther\..\rollback\setupmem.dmp, Result=2
  2012-03-19
  06:19:44, Info DIAGER CWfpER::AddFiles:Adding
  file=O:\$WINDOWS.~BT\Sources\Panther\setupapi\setupapi.app.log
  2012-03-19
  06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
  file=O:\$WINDOWS.~BT\Sources\Panther\setupapi\setupapi.app.log, Result=2
  2012-03-19
  06:19:44, Info DIAGER CWfpER::AddFiles:Adding
  file=O:\$WINDOWS.~BT\Sources\Panther\setupapi\setupapi.dev.log
  2012-03-19
  06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
  file=O:\$WINDOWS.~BT\Sources\Panther\setupapi\setupapi.dev.log, Result=2
  2012-03-19
  06:19:44, Info DIAGER CWfpER::AddFiles:Adding
  file=O:\$WINDOWS.~BT\Sources\Panther\setupapi\setupapi.offline.log
  2012-03-19
  06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
  file=O:\$WINDOWS.~BT\Sources\Panther\setupapi\setupapi.offline.log,
  Result=2
  2012-03-19 06:19:44, Warning DIAG DoWatsonReporting: Not able to add files to Diagnostics Error Reporting, Err=2
  2012-03-19 06:19:44, Info DIAGER DiagERSubmit:Entry
  2012-03-19 06:19:44, Info DIAGER CWfpER::Submit:Entry
  2012-03-19 06:19:46, Info DIAGER Watson Error Report submitted and Result=2
  2012-03-19 06:19:46, Info DIAGER DiagERTerminate:Entry
  2012-03-19 06:19:46, Info DIAGER CWfpER::~CWfpER:Entry
  2012-03-19
  06:19:46, Info DIAGER Consent Value =
  HKCU\Software\Microsoft\Windows\Windows Error
  Reporting\Consent!WinSetupDiag01 has been cleaned out
  2012-03-19 06:19:46, Info DIAGER IDiagER::~IDiagER:Entry
  2012-03-19 06:19:46, Info [0x0a0024] UI progress task ProgressInfo\SendDiagnostics : EndProgress
  2012-03-19 06:19:46, Info [0x090095] PANTHR WdsExitImmediate called! Execution will stop, and the queue won't be saved.
  2012-03-19 06:19:46, Info [0x0640d2] IBSLIB [Setup Disk Usage] ------ Drive O: ------
  2012-03-19 06:19:46, Info [0x0640d3] IBSLIB [Setup Disk Usage] Total bytes on drive: 715048.0 MB (749782167552 bytes)
  2012-03-19
  06:19:46, Info [0x0640d4] IBSLIB [Setup Disk Usage] Free bytes
  available to user: 714300.4 MB (748998279168 bytes)
  2012-03-19 06:19:46, Info [0x0640d6] IBSLIB [Setup Disk Usage] Found Setup folder/file [BT Folder ].
  2012-03-19 06:19:46, Info [0x09008c] PANTHR SeqExecute -- stopping, since WdsExitImmediate() was called
  2012-03-19 06:19:46, Info [0x090086] PANTHR pWorkerThreadFunc -- Stopping
  2012-03-19 06:19:46, Info [0x090086] PANTHR pWorkerThreadFunc -- Stopping
  2012-03-19 06:19:46, Info [0x090086] PANTHR pWorkerThreadFunc -- Stopping
  2012-03-19 06:19:46, Info PANTHR DeleteCriticalSection for pExecQueue->csLock;
  2012-03-19 06:19:46, Info CryptoSetup module terminated
  2012-03-19 06:19:46, Info [0x0605a6] IBS Requested UI to hide the language and locale selection pages.
  2012-03-19
  06:19:46, Info [0x06010d] IBS Module_Term_Productkey: Valid
  product key in blackboard, show property set to hide.
  2012-03-19 06:19:46, Info UI CallbackWin32UITerminate: Deleted WizardUI
  2012-03-19 06:19:46, Info [0x090081] PANTHR Destroying any unreferenced modules! (SEQ6)
  2012-03-19 06:19:46, Info [0x0601d7] IBS InstallWindows:Error Type = 3211266
  2012-03-19 06:19:46, Info [0x090009] PANTHR CBlackboard::Close: o:\$windows.~bt\sources\panther\setupinfo.
  

  
  

  • Edited by .NET Master Monday, March 19, 2012 3:06 AM
  •  
  • Reply
  • Quote