Hi,<br/> <br/> I have 4 VM's installed on a cluster environment with two nodes.<br/> <br/> Often i see that the VM's fail over to node2 with this errors in the 'critical events for nodes'.<br/> <br/> event id 1127 - Cluster network interface 'HVNode1 - Local Area Connection' for cluster node 'HVNode1' on network 'Cluster Network 2' failed. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.<br/> <br/> event id 1135 - Cluster node 'HVNode1' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.<br/> <br/> where as for cluster events<br/> <br/> 1069 - luster resource 'Virtual Machine HSILWebmail' in clustered service or application 'Virtual Machines' failed.<br/> <br/> is displayed.<br/> <br/> But when i move them again to node1 they work properly. Can you tell me where i can get the detail log in case of failover.<br/> <br/> I have tried the 'cluster log /g' at command prompt but that is not detail.<br/> <br/> Thanks<br/> Pradeep<br/> <br/>© 2009 Microsoft Corporation. All rights reserved.Tue, 07 Jul 2009 17:01:52 Zb769ed16-5db0-40ad-8006-afd48d86ec11http://social.technet.microsoft.com/Forums/en-US/winserverClustering/thread/b769ed16-5db0-40ad-8006-afd48d86ec11#b769ed16-5db0-40ad-8006-afd48d86ec11http://social.technet.microsoft.com/Forums/en-US/winserverClustering/thread/b769ed16-5db0-40ad-8006-afd48d86ec11#b769ed16-5db0-40ad-8006-afd48d86ec11pradeep bathulahttp://social.technet.microsoft.com/Profile/en-US/?user=pradeep%20bathulaHi,<br/> <br/> I have 4 VM's installed on a cluster environment with two nodes.<br/> <br/> Often i see that the VM's fail over to node2 with this errors in the 'critical events for nodes'.<br/> <br/> event id 1127 - Cluster network interface 'HVNode1 - Local Area Connection' for cluster node 'HVNode1' on network 'Cluster Network 2' failed. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.<br/> <br/> event id 1135 - Cluster node 'HVNode1' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.<br/> <br/> where as for cluster events<br/> <br/> 1069 - luster resource 'Virtual Machine HSILWebmail' in clustered service or application 'Virtual Machines' failed.<br/> <br/> is displayed.<br/> <br/> But when i move them again to node1 they work properly. Can you tell me where i can get the detail log in case of failover.<br/> <br/> I have tried the 'cluster log /g' at command prompt but that is not detail.<br/> <br/> Thanks<br/> Pradeep<br/> <br/>Sun, 28 Jun 2009 10:53:56 Z2009-06-28T10:53:56Zhttp://social.technet.microsoft.com/Forums/en-US/winserverClustering/thread/b769ed16-5db0-40ad-8006-afd48d86ec11#40ed969a-7a79-47ec-b1a2-7f6e792a00dfhttp://social.technet.microsoft.com/Forums/en-US/winserverClustering/thread/b769ed16-5db0-40ad-8006-afd48d86ec11#40ed969a-7a79-47ec-b1a2-7f6e792a00dfEdwin vMierlohttp://social.technet.microsoft.com/Profile/en-US/?user=Edwin%20vMierloHi Pradeep,<br/><br/>the events 1127 and 1135 need to be tackled, this causes cluster service to terminate and therefore your VM's will move to another node.<br/><br/>First ensure you are running the lastest drivers for you Network Cards, and retry<br/><br/>rgds,<br/>edwin.<br/>Thu, 02 Jul 2009 10:51:17 Z2009-07-02T10:51:17Zhttp://social.technet.microsoft.com/Forums/en-US/winserverClustering/thread/b769ed16-5db0-40ad-8006-afd48d86ec11#4e4ccc45-877b-4ae9-bfdd-c5ce0065f9e9http://social.technet.microsoft.com/Forums/en-US/winserverClustering/thread/b769ed16-5db0-40ad-8006-afd48d86ec11#4e4ccc45-877b-4ae9-bfdd-c5ce0065f9e9Chuck Timon [MSFT]http://social.technet.microsoft.com/Profile/en-US/?user=Chuck%20Timon%20%5bMSFT%5dFrom the node on which the VMs work properly, execute the process in this blog - <a href="http://blogs.technet.com/askcore/archive/2008/08/27/cluster-resource-type-options-for-hyper-v.aspx">http://blogs.technet.com/askcore/archive/2008/08/27/cluster-resource-type-options-for-hyper-v.aspx</a> and ensure the report generated is free of Errors.  Then try a Quick Migration again.<hr class="sig">Chuck Timon Senior, Support Escalation Engineer (SEE) Microsoft CorporationTue, 07 Jul 2009 17:01:52 Z2009-07-07T17:01:52Z