Server 2008 std
-
Thursday, February 07, 2013 9:24 AM
hello,
pls i need help with my server configurations
i have set up a server 2008 std wit dns, dhcp and AD DS configured,
my dns address is 192.168.10.1 and also my dhcp pool starts from 192.168.10.40...200 my server has two NIC's of which am using one for my LAN and the other for my WAN (172.20.15.5 gateway 172.20.15.1)
my clients are getting address from the dhcp but are not browsing..
my client configuration are 192.168.10.40 and so on
gateway 192.168.10.1
dns 192.168.10.1
but none of the clients are browsing...
wat can i do... i need help......
Thanks...
All Replies
-
Thursday, February 07, 2013 9:36 AM Take a look at the RRAS Service ( http://technet.microsoft.com/en-us/library/dd458979.aspx ), which can be used to route your LAN to WAN.
- Marked As Answer by Jeremy_WuMicrosoft Contingent Staff, Moderator Thursday, February 14, 2013 4:54 PM
-
Thursday, February 07, 2013 9:39 AM
Since you have both LAN and WAN to your server, are you planning on using it as a router? Are the clients supposed to access the internet though the server?
If yes then you have to install the role Routing and Remote Access and configure it. Links describing the procedures can be foud here:
http://technet.microsoft.com/en-us/network/bb545655.aspx
http://www.windowsnetworking.com/articles-tutorials/network-protocols/How-configure-Windows-2008-Server-IP-Routing.html
- Marked As Answer by Jeremy_WuMicrosoft Contingent Staff, Moderator Thursday, February 14, 2013 4:54 PM
-
Friday, February 08, 2013 9:18 AMModerator
Hi Penitof,
As others mentioned, you may need to install RRAS on this server.
However, please note, it is recommended to remove the AD DS role on this server due to a Multihomed DC will bring issues.
Reference:Multihomed DCs with DNS, RRAS, and/or PPPoE adapters (Published by Ace Fekay)
Hope this helps.
Jeremy Wu
TechNet Community Support
- Marked As Answer by Jeremy_WuMicrosoft Contingent Staff, Moderator Thursday, February 14, 2013 4:54 PM
.png)
