2 Network Cards
-
Tuesday, March 05, 2013 10:51 AM
Hi,
I have a Windows server 2008 with 2 network cards in the same PC. Only one of them is conneced to the Internet, the other one is connected to the hub in my Internet cafe. How can I have Internet access to the second one from the first network card with full control over the PCs connected to the hub.
Thank you in advance!
All Replies
-
Tuesday, March 05, 2013 11:40 AM
Hello FX-J,
you can enable IP forwarding by following TechNet Library Article Enable IP Packet Forwarding.
If you need to have routing control you can take a look at: Routing and Remote Access Service.Bye,
LucaDisclaimer: This posting is provided "AS IS" with no warranties or guarantees, and confers no rights.
- Proposed As Answer by Santosh BhandarkarMicrosoft Community Contributor, Moderator Wednesday, March 06, 2013 9:21 AM
- Marked As Answer by Jeremy_WuMicrosoft Contingent Staff, Moderator Monday, March 11, 2013 2:11 AM
-
Wednesday, March 06, 2013 5:56 AMModerator
Hi FX-J,
You may need to install RRAS role in this server to make it act as a router.
Also, you may need to install DHCP role to configure TCP/IP settings for the clients.
References:Checklist: Installing and Configuring an RRAS Router
Enable RRAS as a LAN and WAN Router
Checklist: Installing a DHCP server
Hope this helps.
Jeremy Wu
TechNet Community Support
- Proposed As Answer by Santosh BhandarkarMicrosoft Community Contributor, Moderator Wednesday, March 06, 2013 9:21 AM
- Marked As Answer by Jeremy_WuMicrosoft Contingent Staff, Moderator Monday, March 11, 2013 2:11 AM
.png)
