none
Receife Mail from Edge 2010 to Exchange MBX Server 2013

    Question

  • Hi

    We have a Problem with the Mailflow for incoming
    Mails.

    We have migrated all Users to Exchange 2013 with a
    separte CAFE Server. We have check all Documents we found, we have recreate the
    Subscription from Edge 2010 to the new MBX Server 2013

    When we stop the Default Receive Connector on the old
    Exchange 2010 Server. We have no incoming Mail.

    On the Firewall we have opened the new MBX and CAFE
    Server. The Edge Server cannot connect direct to the MBX Server.

    Any Idee?

    Kind regards

    Röndi


    Roendi


    • Edited by Roendi Thursday, November 15, 2012 11:54 AM
    Thursday, November 15, 2012 11:53 AM

Answers

  • Thanks for your assistance

    1. The default Receive connecor listen on port 25

    2. Telnet Localhost 25 is working

    OK I found the Fault. The Edge Server can only resolve the IP Adress. Now I have added the FQDN from MBX Server to Local Host File and now it works the Telnet command.

    Now I will see whats going on.

    I will informe you tomorrow about the rest.

    Thank you very mutch and sorry for my bad english

    Röndi


    Roendi


    • Edited by Roendi Monday, December 17, 2012 6:15 PM
    • Marked as answer by Roendi Tuesday, December 18, 2012 6:22 AM
    Monday, December 17, 2012 5:58 PM

All replies

  • Hi

    What is the result of a Test-EdgeSynchronization command on the 2013 server?

    BTW: Are these servers in the same forest?  How did you migrate the mailboxes?

    Cheers, Steve

    Thursday, November 15, 2012 12:01 PM
  • HI Steve

    The Edge-Sync is full working. Yes the Server are in the same Forest.

    This is the Test-EdgeSync


    RunspaceId                  : f0c2a639-07ff-48d5-b262-606c58fa29f4
    SyncStatus                  : Normal
    UtcNow                      : 15.11.2012 16:16:58
    Name                        : bfu72
    LeaseHolder                 : CN=xxx07V,CN=Servers,CN=Exchange Administrative Group
                                  (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=bfu,CN=Microsoft
                                  Exchange,CN=Services,CN=Configuration,DC=xx,DC=ch
    LeaseType                   : Option
    FailureDetail               :
    LeaseExpiryUtc              : 15.11.2012 17:16:00
    LastSynchronizedUtc         : 15.11.2012 16:16:00
    TransportServerStatus       : Synchronized
    TransportConfigStatus       : NotSynchronized
    AcceptedDomainStatus        : Synchronized
    RemoteDomainStatus          : NotSynchronized
    SendConnectorStatus         : Synchronized
    MessageClassificationStatus : Synchronized
    RecipientStatus             : Synchronized
    CredentialRecords           : Number of credentials 6
    CookieRecords               : Number of cookies 2

    And with this command we move the Mailbox to the new Server; From the new MBX Server

    New-MoveRequest -Identity 'Müller Max' -TargetDatabase maildb01 -ArchiveTargetDatabase archivedb01 

    Thanks for your assistance

    Kind Regards

    Röndi


    Roendi


    • Edited by Roendi Thursday, November 15, 2012 4:22 PM
    Thursday, November 15, 2012 4:20 PM
  • Until the release of 2010 SP3 coexistence is not supported with 2013.  How did you even manage to install 2013, it should have failed the pre-reqs?

    Steve

    Thursday, November 15, 2012 6:12 PM
  • Hi Roendi,

    I think Steve is right, Exchange 2010 SP3 is required for the coexist environment. See http://technet.microsoft.com/en-us/library/aa996719.aspx

    The current environment might not be supported. I'd suggest you contact Microsoft Customer Support Service for assistance so that this problem can be resolved efficiently. Your understanding would be appreciated.

    Referf to:

    http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS


    Fiona Liao

    TechNet Community Support

    Friday, November 16, 2012 8:12 AM
    Moderator
  • Hi

    We are in the Tap Program and we have installed SP3 on the Exchange 20100

    So we have a supportet Environement. 

    The only Problem is the Mailflow for incoming Mails.

    We want remove the old Exchange 2010 Server

    If anyone has an Idea?

    Kind Regards

    Röndi


    Roendi

    Monday, November 19, 2012 8:09 AM
  • Hi

    I would escalate this issue to Microsoft through the TAP program.

    Cheers, Steve

    Monday, November 19, 2012 9:08 AM
  • 1. Logon to your Edge Transport Server and open the command prompt

    2. Try Telnet "FQDN of 2013 Mailbox Server" 25 and hit enter

    3. Check if you see banner from 2013 mailbox Server? Type EHLO and hit enter, do you see all the verbs?

    4. If first 3 steps work fine then look at the Inbound Send Connector.

    5. Change the Smart Host from default "--" to IP address of E2013 Mailbox Server? You need to make this change from Hub Server and Sync the changes with Edge

    6. Enable Receive connector logging on 2013 Mailbox Server and Send Connector Logs on Inbound Send connector

    Let me know how it goes.


    Padamdeep Singh

    Monday, December 17, 2012 2:24 PM
    Moderator
  • Hi

    I am not able to connect over port 25 to the new Server. I check the Firewall. There is no problem. The Receife Conntecor on both Server (Exchange 2010 + 2013) have the same Permission.

    What I need to change


    Roendi

    Monday, December 17, 2012 2:51 PM
  • 1. Check receive connector on 2013 and see if it's set to listen on port 25

    2. Log on to 2013 Mailbox server and try Telnet localhost 25 and see if works and you get banner.

    Please keep me posted


    Padamdeep Singh

    Monday, December 17, 2012 3:51 PM
    Moderator
  • Thanks for your assistance

    1. The default Receive connecor listen on port 25

    2. Telnet Localhost 25 is working

    OK I found the Fault. The Edge Server can only resolve the IP Adress. Now I have added the FQDN from MBX Server to Local Host File and now it works the Telnet command.

    Now I will see whats going on.

    I will informe you tomorrow about the rest.

    Thank you very mutch and sorry for my bad english

    Röndi


    Roendi


    • Edited by Roendi Monday, December 17, 2012 6:15 PM
    • Marked as answer by Roendi Tuesday, December 18, 2012 6:22 AM
    Monday, December 17, 2012 5:58 PM
  • Glad to hear from you. This is what I had suggested earlier

    5. Change the Smart Host from default "--" to IP address of E2013 Mailbox Server? You need to make this change from Hub Server and Sync the changes with Edge


    Padamdeep Singh

    Tuesday, December 18, 2012 6:50 AM
    Moderator
  • I need to get on that TAP I asked about name of the DL in a meeting. I've been running Exchange 2013 on Server 2012 internal->internal and internal-> external mailflow  working with my DAG named DAGOBAH. 

    I am currently pending Edge for external->internal flow with  Edge 2010 support in SP3 in my lab environment. I started the process of pointing my MX at the E15 and do a no Edge scenario but I been busy with other stuff & holidays. I'd rather help with TAP than deploy a 3rd party antispam anyway! I will join the TAP and see if I can help drive this!

    \

    • Edited by [Cyb0rG] Saturday, December 22, 2012 2:26 AM removing email
    Saturday, December 22, 2012 2:24 AM