add a tv tuner to be forced hardware
-
samedi 26 mai 2012 16:11
Hi,
I have a TV Tuner ProHDTV Diamond
The Driver and Software are installed and up to date.
But, It can't be detect on windows 7 boot up time occasionally. Anyway to solve it out? It let me trouble.
Could it set this tv tuner to be forced hardware, could it be solved? Or give me any idea that could solve this issue?
Grateful if it solved!
Thank you Very much
fsze88
Toutes les réponses
-
lundi 28 mai 2012 07:29
Hi,
You’d better check the BIOS settings, especially the PCI devices settings. In the meantime, you may check the TV tuner compatibility.
Windows 7 Compatibility Center
If the issue persists, I suggest you contact manufacture for assistance.
Ivan-Liu
TechNet Community Support
-
mercredi 30 mai 2012 03:04
Dear Ivan Liu
I have checked BIOS setting, there is not much PCI-E setting there. Only thing I can do is Disabled C-State
I have checked Compatibility Center, there is no details about my TV Tuner
I asked manufacture, they advice to me change the pci-e slot.
Any other way to fix this issue?
Thank you!
fsze88
-
mercredi 30 mai 2012 05:43 Generally speaking, it is not a plug and play device, so it should be detected at boot time. Please tighten it or replug. When it detect failed, you'd better have a check in Device Manager, to disable and enable it for test.
Ivan-Liu
TechNet Community Support
- Marqué comme réponse Arthur XieMicrosoft Contingent Staff, Moderator jeudi 7 juin 2012 08:40
.png)
