High Definition Audio Device Driver Not Working
-
giovedì 20 luglio 2006 15:47
I have no sound at all. I have a Toshiba Satellite P105-S9312 which, I read, uses the Conexant CX20551-22 audio codec and supports Intel's High Definition Audio specification. Vista has recognized my "High Definition Audio Device" (as listed in Device Manager) but says, "This device cannot start. (Code 10)."
I've tried the usual, "Check for Solutions" and "Driver Update" but no success.
How can I get my sound working?
Tutte le risposte
-
lunedì 24 luglio 2006 04:40
Try these file?
they are conexant/realtek vista beta drivers
ftp://152.104.238.194/pc/ac97/alc650/6122_Vista_Beta2.zip
ftp://152.104.238.194/pc/hda/alc880d/Vista_HDA5280.zip
worked for me
good luck
-
martedì 1 agosto 2006 18:27
I have tried the two files, still no joy.
Any other suggestion please?
Regards
JCJC
-
mercoledì 2 agosto 2006 19:25
Hi,
Does your driver support SPDIF digital output but NOT analog? If so, that sounds like a problem I had with my Soundmax. I had to stick my old Audigy in the box to get sound in Vista, since it wouldn't work with onboard or my M-audio Delta.
(Kudo's to Creative for putting out a WORKING Vista driver for an older product.)
Maybe this is a general problem with HDA drivers. I've heard that HDA is part of the movement to "patch the analog hole" as a DRM strategy but they seem to be jumping the gun here :)
-
mercoledì 2 agosto 2006 22:47Check the conexant ac-link audio thread, it seems to have a clever hack that might work for you.
-
giovedì 3 agosto 2006 12:46
Hey JC,
It seems I spoke too soon. I did in fact get the drivers to install but they are very unstable.
I had a lot of BSOD's. So I went to the hp.com site and downloaded the XP drivers and installed them in XPSP2 compatibility mode and everything works great now.
Try finding this file for your OEM version and install it and then install the OEM sound drivers.
Microsoft UAA Bus Driver for HD Audio
What kind of PC do you have?
Let me know, Chris
-
venerdì 8 settembre 2006 01:16
hi could you please send me the 2 files ftp link is not working
my email is medmenz@yahoo.com
thanks
-
giovedì 14 settembre 2006 02:12
Richard,
Did you ever find a resolution. I have the exact same issue with my P105. I get the Code 10 error. I cannot find a solution anywhere. Toshiba is clueless from what I can get out of them.
If you have not found a solution let me know and I will update you if I find something.
James
-
venerdì 29 settembre 2006 07:36I have Code 10 error with Toshiba P100-217 :/ somoe one find solution?
-
venerdì 29 settembre 2006 14:57
solutions mentioned above don't work for my SigmaTel HDA.... Windows says 'No audio output device is installed'
can someone pls help me on this??
-
venerdì 13 ottobre 2006 13:26yeah i have the same problem on the same system as the original post but i am still on xpsp2 so i dont think it is a software issue. i am thinking that it is a chonic , and most likely, hardware issue. ive been trolling forums for a while now looking for a solution and i havnt found anything for sp2 yet. any tips would be appreciated.
-
venerdì 13 ottobre 2006 13:39
Richard,
I found the solution, at least for my P105-S6014 model. This solution has proven useful for several driver issues.
I was able to install the actual drivers provided by Toshiba for XP. I unpacked the files into a directory and then went into each file and found all application type files. Right click on the application file and select proprtie. Go to the compatibility tab and check the box to run for Windows XP SP2. After doing that to applications within that file I was then able to run the setup and it installed perfectly.
I have found this technique will work for othr drivers as well.
Also, since you have a P105 you probably have a mass storage controller device issue. I was not able to resolve that. Then, magically after installing Vista RC2 all my remaining device issues went away. I now have use of my card reader, usb works the way its suppose to, etc.
Hope this helps everyone or at least someone.
James
-
domenica 15 ottobre 2006 02:35Vista RC2 - I got mine running by uninstall device and auto update then reboot then see my last post on SigmaTel High Def Audio thread. Hope it works for you.
-
domenica 15 ottobre 2006 19:23
what is the usr name & passeword for these FTP sites? i tried but it said limited access and i couldn't find the zip files you named
thankx!!
-
lunedì 13 novembre 2006 20:40i got the situation which is i installed the driver for HD sound card normally, and the icon shows the sound card works normal , but still don't have the sound, i also try to install the driver manually, then the system jump to the blue screen to dump the memory.so please tell me any solution for it, thanx.
-
domenica 18 febbraio 2007 12:20
SoundMAX Integrated Digital HD Audio – Here is a Vista Upgrade Fix that worked for me !!!
I too had the NO SOUND issue and it was driving me crazy . I read several post here about the sound problem. I too had a red X by my speaker icon and no sound. I downloaded the driver several times for SoundMAX Integrated Digital HD Audio. It did no good; my system would not recognize the driver. The error message from the red X continued to say I had no Audio device loaded. Rrrrrrrrr!
I called HP support. After an hour and a half and three Indian foreign specialist, I was told that they knew of the problem and it was a Microsoft support issue, not their HP machine. They stated that there was not yet a driver out for Vista. Go figure huh? You gotta love those Indian guys. “tank you vedy much”.
I went to the driver section so I could look at the list to draw from. I chose the “Browse for driver software on your computer”. When I went to that screen, instead of hitting the browse button I chose the option below called “Let me pick from a list of device drivers”. When I was brought to the next screen there were two drivers to choose from. I saw my driver and tried that one. Rats, it still did not solve the problem. I repeated the steps above and chose the other driver instead, I chose the
‘High Definition Audio device”. I got a warning that it was not a correct copy and it might cause instability I figured this was the driver for the HDTV devise but I chose it anyway. The red x went away from my speaker icon which was progress but still no sound.
I then repeated the steps aboveproceeded to RE-LOADED my SoundMAX Integrated Digital HD Audio driver. The system told me to reboot. I did… and gentlemen, I had sound. My music never sounded so good.
I believe the problem is that if your system thinks you have the correct driver, it does not reload it. But by changing drivers then going back to the original driver, it forced the system to re-load it. Who knows, after all, I am not a certified geek (Just a closet geek).
Your mileage may vary.
Tim
-
domenica 18 febbraio 2007 16:54I would uninstall any previous driver and go with MS HD Audio, you may have problems with mic though. Hope it works.
-
mercoledì 21 febbraio 2007 12:44
Hi I just switched to Vista Business and I got the "mute problem".
I have downloaded several drivers but no one works, not even the one from microsoft (http://support.microsoft.com/default.aspx/kb/929685). All I can see in the Device Manager is that "High Definition Audio Device" is marked with a warning triangle and I cant find any solutions... Can anyone help me maybe?
If so please mail me;
nicklas.hellborg@hotmail.com/Nicklas
-
venerdì 23 febbraio 2007 11:03Hi,
I too have no sound. Vista thinks there is a High Definition Audio Device (in Device Manager) and that its driver is working ok. But when you go to the Sound panel on the Playback panel it shows an icon for Headphones and says High Definition Audio device Not plugged in (and plugging headphones in doesnt change things!).
Anyone have any suggestions?
Hp Pavillion t3355.uk ASUS P5LP-LE motherboard, with Relatek 882 , Vista Ultimate. -
venerdì 23 febbraio 2007 13:44Hi
I fixed it on my Pavilion t3355. I found this article.
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=697555&SiteID=17
Downloaded the Intel driver from
http://downloadfinder.intel.com/scripts-df-external/Detail_Desc.aspx?agr=N&DwnldID=7525&ProductID=1861
And "voila" I have sounds :)
Hope this helps others. -
sabato 3 marzo 2007 05:52Hey guys, I am having an issue with this HD audio also. I have a HP dv6227cl AMD Turion TL-50 x2 with a gig of ram. My system came with Vista Home Premium, but me being me I never use factory defaults I messed around with Vista Home Premium for about 2 weeks then wiped my drive and per-pared it for tri-boot. Now I have sound in Vista Ultimate and in Linux, but not XP. Everytime I goto install that Microsoft UAA Bus Driver it gives me code 39 "Device cannot start".
As far as microsoft solutions goes none of their remedies for code 39 work? Anybody else had this problem with HD audio in XP? Apparently I have the mcp51 audio chip which is Conexant HD Audio, but even after installing the UAA bus driver (still getting code 39) then when attempting to install the Conexant driver's they never find the hardware. They scan then the little sound and audio devices applet flashes for a sec then I get either a failure or cannot find audio device.
Also the integrated 56k modem is not detected either. Same issue with that which I know it has something to do with this HD audio problem. Greatly appreciated any help guys. -
mercoledì 13 giugno 2007 11:55Take a look at www.motor2t.net. There´s one alternative.
-
venerdì 6 luglio 2007 18:11I have a Dell Dimension E521, and I just upgraded to Vista and now therer's no sound at all. I,ve tried everything I can think of to fix can someone help me?
-
venerdì 6 luglio 2007 18:53I´ve reloaded the links to driver files to Microsoft UAA and Conexant on my site. Try again the solution posted in www.motor2t.net
-
lunedì 27 agosto 2007 18:16
sitefusion wrote: Using HP DV6140 laptop; Conexant high definition audio driver; output works fine but cannot record with microphone, either built-in or external. Is this a driver problem?
-
martedì 16 ottobre 2007 21:16
Mine is a Presario 3000 laptop, Conexant hd audio works fine with recording from the built-in microphones with the mircrosoft recorder, but it cannot record anything streaming. I have downloaded and tried many recorder but none of them can locate the sound source except the microphone.
May be Conexant has a huge flaw ?
Any help appreciated.
-
sabato 10 maggio 2008 23:31When I restart my computer, I have no sound at all.
-
lunedì 9 giugno 2008 06:48What worked for me was unistalling my audio device through device manager than reinstalled it using my mobo cd. I went back to device and looked under audio and said my play back (speakers werent plugged in). So out of curiousety i clicked on recording tab and my mic had a green check next to it (working). I just fooled around with the 3 audio pluggins. I unplugged the one i usually would use (on xp, the red audio plugging) and plugged it into another one (the green plugging) and it worked just like that. I tried adding new codecs and what not and wouldn't work until i uninstalled and reinstalled. Thats how i got my high definition audio device to work on my vista pc.
-
domenica 13 luglio 2008 13:43
need software to install the drivers
-
martedì 27 ottobre 2009 18:36my laptop is HP Pavillion dv6 1115ee..........i have vista home premium............& had service pack 2........then i did a recovery very recently........my sound system is IDT High Definition Audio CODEC...........it worked properly and very accurately till today...........again i upgrade to service pack 2 today...............and after that my sound system is not working..............please help me..........i'm in a trouble...........please help me...........i'm waiting for your reply.............please give me a solution..............please reply me as soon as possible...............
-
sabato 3 luglio 2010 11:28how do u get sound on your netbook N130 i have no audio device and cant plat anything with sound can you help me please
-
lunedì 12 luglio 2010 19:29
sitefusion wrote: Using HP DV6140 laptop; Conexant high definition audio driver; output works fine but cannot record with microphone, either built-in or external. Is this a driver problem?
me to -
giovedì 15 luglio 2010 17:30
Cause
There are several causes of Code 39 errors:
A required device driver is missing.
A required binary file is corrupted.
There is a problem with the file I/O process.
A driver that is referencing an entry point in another binary file is unable to load.
Recommended resolutionReinstall the drivers for this device.
Uninstall and reinstall the driver
Uninstall the driver from Device Manager, and then scan for new hardware to install the driver again.
You may be prompted to provide the path of the driver. Windows may have the driver built-in, or may still have the driver files installed from the last time that you set up the device. However, sometimes, it will open the New Hardware Wizard which may ask for the driver. If you are asked for the driver and you do not have it, you can try to download the latest driver from the hardware vendor’s Web site.
On the device Properties dialog box, click the Driver tab, and then click Uninstall. Follow the instructions.
Restart your computer.
Open Device Manager, click Action, and then click Scan for hardware changes. Follow the instructions.- Proposto come risposta Francisco Martin Garcia giovedì 15 luglio 2010 17:31
-
martedì 2 novembre 2010 21:20That is almost exactaly what happened to me. I am still looking for a awnser. I also upgraded to service pack 2. So please tell me if you find anything. Thanks.
-
domenica 28 novembre 2010 23:01 The drivers for the device are listed under "sevices", near the end of the listings there..."windows audio service" and "windows audio endpoint service". Check those settings, then try the following links if the driver is configured to start properly and the services are started, but it still won't work. (wrong driver version, etc.etc..) "http://downloadcenter.intel.com ". If yours is "Intel Inside". "http://support.amd.com ". If you have an AMD PROCESSOR. tHE AUDIO COMPONENT IS CONSIDERED PART OF THE CHIPSET.
"http://support.microsoft.com/fixit/default.aspx ". This is MICROSOFT'S new, FREE, fully automated, anonymous support portal, which can help users resolve windows and other product issues with a few mouse clicks. BOOKMARK THIS SITE, EVERYBODY !!!- Proposto come risposta NTauthority T.Welch domenica 28 novembre 2010 23:19
-
martedì 27 dicembre 2011 18:08
I have no sound at all. I have a Toshiba Satellite P105-S9312 which, I read, uses the Conexant CX20551-22 audio codec and supports Intel's High Definition Audio specification. Vista has recognized my "High Definition Audio Device" (as listed in Device Manager) but says, "This device cannot start. (Code 10)."
I've tried the usual, "Check for Solutions" and "Driver Update" but no success.
How can I get my sound working?
-
venerdì 17 febbraio 2012 13:22
Hi,
Download freeware - DriverPack Solution and run it...it's like a free edition of driver genius...but a lot better!
Ash
.png)
