Server 2008 Hypervisor

모든 응답

• 2008년 5월 14일 수요일 오전 10:38David Shen - MSFTMSFT, 중재자

   
  

  0

  로그인하여 투표
  Hi,

   

  1. Please verify that the following settings are enable in the BIOS of the physical computer:

   

  a. hardware-assisted virtualization
  b. hardware-assisted data execution protection (DEP)

   

  2. Please check if the CPU support the Virtualization

   

  you can see what revision of CPU you have by using a tool such as CPUz (http://www.cpuid.com/cpuz.php)

   

  3. Please verify that the "Virtual Machine Management" service is started and running on the problematic machine.

   

  4. Please try executing "bcdedit /set hypervisorlaunchtype auto" and reboot the problematic machine to check if the issue will re-occur.

   

  5. Please also adjust the memory usage of the virtual machine and reboot it to check if the issue will re-occur.

   

  6. You may also check the "Event Viewer", expand "Custom views" -> "Server Roles" -> "Microsoft Hyper-V",  please check if there is any error message.

   

  Hope it helps.
  
  • 응답
  • 인용

   
• 2008년 5월 14일 수요일 오후 5:03Guinness133

   
  

  0

  로그인하여 투표

  yeah, everything that is needed is on. Although, I do not see a "Virtual Machine Management" service.

   

  Here is the error....

   

   

   

  An error occurred while attmepting to change the state of the virtual machine.

   

  "virtual machine" failed to initialize.

   

  The virtual machine could not be started because the hypervisor is not running.

   

   "virtual machine" failed to initialize  ( VMID 40A3C1CC-8112-4562-8E78-FE31DF31E22B )

   

   

   

   

  • 응답
  • 인용

   
• 2008년 5월 14일 수요일 오후 5:44Soumya Das Bhaumik [MSFT]

   
  

  0

  로그인하여 투표

  Hi:

   

  Could you give us some details on the processor (manufacturer, type, bios version) that you are using?

   

  • 응답
  • 인용

   
• 2008년 5월 14일 수요일 오후 6:46Guinness133

   
  

  0

  로그인하여 투표

   Sure.....

   

  Dell Optiplex 755

  Intel Core 2 Duo E8200  2.66GHz

  BIOS: A09

   

   

   

  • 응답
  • 인용

   
• 2008년 5월 14일 수요일 오후 11:41Mike Sterling [MSFT]MSFT, 소유자

   
  

  2

  로그인하여 투표

  Did you enable these setting on your machine

   

  1.     Under Security – Execute Disable – ON

  2.     Under Performance – Virtualization – ON

  3.     Under Performance – VT for Direct I/O – ON

  4.     Under Performance – Trusted Execution – OFF

   

  Also do this bcdedit /set hypervisorlaunchtype auto

   

  Once you do that..Completely poweroff your machine… not just shutdown but remove the power cord from the machine and then plug it back in and start the machine. Try the install after that it may work

   

  • 응답
  • 인용

   
• 2008년 5월 15일 목요일 오후 1:40Guinness133

   
  

  0

  로그인하여 투표

   Well, I think that's the first I've heard of pulling the power cord out, but that worked. Awesome, thanx!

   

   Also, do you know off hand if Server 2008 has a partitioning tool built in?

   

   

  Cheers!

  • 응답
  • 인용

   
• 2009년 5월 2일 토요일 오후 12:07Trebjonn

   
  

  0

  로그인하여 투표
  The built in tool for partitoin is named Diskpart. See link for more information. It's also located in Windows 2003
  http://support.microsoft.com/default.aspx/kb/300415
  
  
  BR
  Stale

  • 답변으로 제안 취소됨John Paul CookMVP, 중재자2009년 5월 2일 토요일 오후 7:58
  • 답변으로 제안됨Trebjonn 2009년 5월 2일 토요일 오후 12:12
  •  
  • 응답
  • 인용