user at different site
-
quinta-feira, 17 de novembro de 2011 15:59
Hi All,
currently I have this environment:
1 site (A) : AD + Exchange 2010 SP1 (X), the Exchange server and AD+user physically located at different location.
then I'm planning to create a new site (B) and promote 1 AD and move (X) to the new site. Is there any issue with it, what major things that I have to deal/concern about ? Because the user at site (A) will not have Exchange, and will trying to access it to site (B) ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Todas as Respostas
-
quinta-feira, 17 de novembro de 2011 19:34Hello make sure your DC on the new SiteB is a global catalog. I will test with atleast one or two users before moving all other users to the new site. Main concern here will be performance of exchange
Isaac Oben MCITP:EA, MCSE,MCC View my MCP Certifications -
quinta-feira, 17 de novembro de 2011 22:41
As long as the moved Exchange server has registered in DNS and there is a local GC at site B then you should be OK. User will be connecting across the link.
I assume you will create the relevant AD sites too.
Sukh -
sexta-feira, 18 de novembro de 2011 06:28
Hello make sure your DC on the new SiteB is a global catalog. I will test with atleast one or two users before moving all other users to the new site. Main concern here will be performance of exchange
Yes, of course I will make it as a GC.
Isaac Oben MCITP:EA, MCSE,MCC View my MCP Certifications
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
sexta-feira, 18 de novembro de 2011 06:29
Yup, thanks.As long as the moved Exchange server has registered in DNS and there is a local GC at site B then you should be OK. User will be connecting across the link.
I assume you will create the relevant AD sites too.
Sukh
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.- Sugerido como Resposta sushantgharpure sexta-feira, 18 de novembro de 2011 11:43
- Não Sugerido como Resposta sushantgharpure sexta-feira, 18 de novembro de 2011 11:43
-
sexta-feira, 18 de novembro de 2011 11:44
Hi,
You must Deploy GC with Cas Server Role In Every AD Site.
Cause In Exchange 2010 Every Client Connects To Cas Server Instead Of Mailbox Servers like Exchange 2007.
You will Face Client Disconnecting Issue Where your CAS Server isnt Exist.
Thanx
Sushant
- Sugerido como Resposta sushantgharpure sexta-feira, 18 de novembro de 2011 11:44
- Não Sugerido como Resposta Krisna Ismayanto sexta-feira, 18 de novembro de 2011 12:22
-
sexta-feira, 18 de novembro de 2011 12:22
can you give technet link ?Hi,
You must Deploy GC with Cas Server Role In Every AD Site.
Cause In Exchange 2010 Every Client Connects To Cas Server Instead Of Mailbox Servers like Exchange 2007.
You will Face Client Disconnecting Issue Where your CAS Server isnt Exist.
Thanx
Sushant
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
sexta-feira, 18 de novembro de 2011 12:48
If you're moving your Exch from one site to another then you shouldn't have this issue as you've go the CAS installed on Exchange anyway.
"You must install the Client Access server role in every Exchange organization and every Active Directory site that has the Mailbox server role installed."
http://technet.microsoft.com/en-us/library/bb124915.aspx
Sukh -
sexta-feira, 18 de novembro de 2011 13:07
Hi All,
I'm having issue after I set ClientAccessArray to my new site, the member is empty, I've already try remove and create new, but still no member. Pls help. If I turn back the old site it got the member.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.- Editado Krisna Ismayanto sexta-feira, 18 de novembro de 2011 13:27
-
sexta-feira, 18 de novembro de 2011 13:58Create a new CAS Array for your new site and add in the Exch server which was moved. You may have to remove it from the current CAS array in the previous site.
Sukh -
sexta-feira, 18 de novembro de 2011 14:32
Hi Sukh,
Already done that, still not work.
I've check the domain controller and global catalog servers, it still using DC at the old site, how to change it. I've already set statically but didn't work. The event ID 2080 only discover the DC that located at old site.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.- Editado Krisna Ismayanto sexta-feira, 18 de novembro de 2011 14:42
-
sexta-feira, 18 de novembro de 2011 14:39
What do you get when you run
Get-ClientAccessArray on the Exchange server at the new site?
Have you changed the IP for the Exch server at the new site?
Sukh -
sexta-feira, 18 de novembro de 2011 15:20
when I run the command, the member is empty {}
I'm not changing the IP, I'm just move the subnet to the new AD site.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
sexta-feira, 18 de novembro de 2011 15:33
Get-ClientAccessArray |fl
Also, after you have created the new array, have you updated the RPCClientAccess value on the mailbox databases?
Sukh -
sábado, 19 de novembro de 2011 01:33
RPCClientAccess using the same valueGet-ClientAccessArray |fl
Also, after you have created the new array, have you updated the RPCClientAccess value on the mailbox databases?
Sukh
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
sábado, 19 de novembro de 2011 16:38
Get-ClientAccessArray |fl
Is the RPCClientAccess value the same? Did you create a new CAS array?
Sukh -
sábado, 19 de novembro de 2011 17:10
[PS] C:\>Get-ClientAccessArray -Identity webmail | fl
RunspaceId : 15639bd7-73bd-414a-9189-ba2a23e4a352
ExchangeLegacyDN : /o=XYZ/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=webma
il.XYZ.co.id
Fqdn : webmail.XYZ.co.id
Site : intra.XYZ.co.id/Configuration/Sites/JKTGRHX
SiteName : PQR
Members : {CASHT01, CASHT02}
AdminDisplayName :
ExchangeVersion : 0.1 (8.0.535.0)
Name : webmail
DistinguishedName : CN=webmail,CN=Arrays,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN
=XYZ,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=intra,DC=XYZ,DC=co,DC=id
Identity : webmail
Guid : 96f7ce52-148f-464d-8229-e0f8c0d19bfb
ObjectCategory : intra.XYZ.co.id/Configuration/Schema/ms-Exch-Client-Access-Array-2
ObjectClass : {top, server, msExchExchangeServer, msExchClientAccessArray}
WhenChanged : 11/19/2011 8:34:41 AM
WhenCreated : 11/19/2011 8:34:21 AM
WhenChangedUTC : 11/19/2011 1:34:41 AM
WhenCreatedUTC : 11/19/2011 1:34:21 AM
OrganizationId :
OriginatingServer : PQRDC02.intra.XYZ.co.id
IsValid : True
yes, RPCClientAccess same value. I've already mention before I've tried remove and create new CAS Array.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
sábado, 19 de novembro de 2011 20:30
Members : {CASHT01, CASHT02} This shows members, I thought it was empty?
Also, what does event id 2080 show?
Sukh -
domingo, 20 de novembro de 2011 22:21
I remove the exchange server subnet from the new site, because the member is not appearing. I'll do some lab test first. Do you ever done this before, pls advise.Members : {CASHT01, CASHT02} This shows members, I thought it was empty?
Also, what does event id 2080 show?
Sukh
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
.png)
