Conectare
 
Pagina de pornireBibliotecăInformațiiFişiere de descărcatSuportComunitateForumuri
Resurse pentru profesionişti IT >
> 
> 
Add Server Node to Hyper-V Cluster

Answered Add Server Node to Hyper-V Cluster

  • 9 iunie 2012 08:48
     
     
    Sign in pentru a vota
    0
    Hello Every Body i need to add server node to hyper-v Cluster 2008 R2 Sp1 the problem that when i run the validation test the Storage become failed at

    List Potential Cluster Disks

    however that all LUNs Presented well, also find by the following error deatils:

    Disk with identifier eb0313fa has a Persistent Reservation on
    it. The disk might be part of some other cluster. Removing the disk from
    validation set
    Disk with identifier eb0313fb has a Persistent Reservation on
    it. The disk might be part of some other cluster. Removing the disk from
    validation set
    Disk with identifier eb0313fc has a Persistent Reservation on
    it. The disk might be part of some other cluster. Removing the disk from
    validation set
    No disks were found on which to perform cluster validation
    tests. To correct this, review the following possible causes:
    * The disks are already clustered and currently Online in the
    cluster. When testing a working cluster, ensure that the disks that you want to
    test are Offline in the cluster.
    * The disks are unsuitable for clustering. Boot volumes, system
    volumes, disks used for paging or dump files, and disks that do not use NTFS are
    examples of disks unsuitable for clustering.
    * The disks are not visible to two or more nodes. Review the
    "List All Disks" test to see which disks are visible to the nodes. Ensure that
    the disks you want to test are unmasked, that is, your masking or zoning does
    not prevent access to the disks. If the disks seem to be unmasked or zoned
    correctly but could not be tested, try restarting the servers before running the
    validation tests again.
    * The cluster does not use shared storage. A cluster must use a
    hardware or software based replication solution to replicate data between nodes.
    If your solution is in fact based on replication between nodes, you do not need
    to rerun Storage tests. Instead, work with the provider of your replication
    solution to ensure that data is being replicated between nodes.
    No disks were found on which to perform cluster validation
    tests.

    Ahmed Ali

     

Toate mesajele

  • 10 iunie 2012 10:13
    Moderator
     
     Răspuns
    Sign in pentru a vota
    0

    Hi,

    Do you see the disks on both nodes ? and did you presents the luns on both WWN ? of both nodes ?

    and if you stop one cluster node and added the disks to one node does it work ?

    Check if the LUN presentation is ok check if the WWN are right

    Greetings, Robert Smit [MVP] http://robertsmit.wordpress.com/ “Please click "Vote As Helpful" if it is helpful for you and Proposed As Answer”

     
  • 11 iunie 2012 02:06
    Moderator
     
     Răspuns
    Sign in pentru a vota
    0

    Hi,

    Before you add the new node to the existing cluster, you need to do some prerequisite.

    For more information, you can refer to:

    Creating a Failover Cluster or Adding a Cluster Node
    http://technet.microsoft.com/en-us/library/cc730647.aspx