войти
 
ГлавнаяНовостиБиблиотекаОбучениеСкачатьМероприятияСообществоФорумыПоддержкаО проекте
Ресурсы для ИТ-профессионалов >
> 
> 
Adding a Pass-through Disk to a Highly Available Virtual Machine

Answered Adding a Pass-through Disk to a Highly Available Virtual Machine

  • 3 мая 2012 г. 13:55
     
     
    Нужно войти
    0

    hi,

    I created disk in EVA storage. I cant get pass through disk with \\?\GLOBALROOT to vm. I see disk on cluster nodes. I added them to VM. How could I refresh VM configuration in Failover cluster to see the disk attached?

    please help

    • Изменено natip 3 мая 2012 г. 14:16
    • Изменено natip 3 мая 2012 г. 15:01
    •  
     

Все ответы

  • 3 мая 2012 г. 15:22
    Модератор
     
     
    Нужно войти
    1
    Hi,

    Please check the following blog.

    Adding a Pass-through Disk to a Highly Available Virtual Machine
    http://blogs.technet.com/askcore/archive/2009/02/20/adding-a-pass-through-disk-to-a-highly-available-virtual-machine.aspx

     
  • 3 мая 2012 г. 15:26
     
     
    Нужно войти
    0

    Vincent, i am looking at it all the day, but no luck, I know it is working, but cant get how, please help.

    what are main steps?

    I see Basic offline unallocated disk in HOST disk management.

    I shut down VM and add disk to VM through Settings/SCSI controller/ Hard Drive/ Add /Physical hard disk.... Only one machine will use this LUN.

    I start the Vm, I see disk in disk management, what should I do next?

    After refresh I got:

    The following disk path was found to be required by the virtual
    machine 'server2', but it is on a disk that has not yet been added to the
    cluster: '\\.\PhysicalDrive13'. This disk must be added to the cluster to make
    this virtual machine highly available.

    Virtual machine 'server2' is configured to use disks that are not
    part of the cluster, but are available to the cluster and could be added to the
    cluster. To ensure this virtual machine can be clustered and highly available
    all of its storage must be present in the cluster

    please help




    • Изменено natip 3 мая 2012 г. 15:38
    • Изменено natip 3 мая 2012 г. 15:40
    • Изменено natip 3 мая 2012 г. 15:47
    •  
     
  • 3 мая 2012 г. 15:35
     
     
    Нужно войти
    1

    Vincent, i am looking at it all the day, but no luck, I know it is working, but cant get how, please help.

    what are main steps?

    thank you

    Try adding a LUN using VM built-in iSCSI initiator.

    -nismo

     
  • 3 мая 2012 г. 21:00
     
     Отвечено
    Нужно войти
    1

    If the disk is presented to all cluster nodes, in Cluster Manager, right-click Storage and choose Add Disk. It should appear there.

    The disk needs to be part of the cluster, not just presented to all nodes, before it can be added to an existing cluster resources (a VM).

    • Помечено в качестве ответа natip 4 мая 2012 г. 7:15
    •  
     
  • 4 мая 2012 г. 7:17
    Модератор
     
     
    Нужно войти
    0

    Hi,

    If you add a LUN to a virtual machine as pass-through disk, you will not be able to use this disk in cluster.