SQL Server Master Data Services announcement
-
Link
While reading a reply to your question, you will notice a button with an icon that says "Mark as Answer." Please select this button when a reply answers your question.
There are several reasons to do this:
- Our search engine weights Answered questions more highly. By marking Answers you increase the chances that others searching this forum will find the answer directly rather than re-posting the question.
- You give credit to the hard working folks who answer your questions. This is peer to peer support, so recognition is our only reward. (Check out the Top Answerers in 30 Days chart at the bottom of the thread list to see who is currently answering questions.)
- You help Microsoft to track the health of this forum. Our forum gets 'measured' based on how many unanswered questions are in it at any time and we work hard to keep those numbers to as low a level as possible. By marking answers, others get a more accurate understanding of how well (or badly) things are going on the forum.
You can also vote "Yes" or "No" if the reply was helpful.
Thank you!
Ed Hickey
Categories
-
Select allSQL Server Data WarehousingSQL Server Integration ServicesData MiningSQL Server Reporting Services, Power ViewSQL Server Analysis ServicesSQL Server ToolsTransact-SQL.NET Framework inside SQL ServerSQL Server Data AccessSQL Server SMO/DMOSQL Server XMLSQL Server ReplicationSQL Service BrokerSQL Server SecuritySQL Server Database EngineSQL Server DocumentationSQL Server Setup & UpgradeSQL Server High Availability and Disaster RecoverySQL Server Notification ServicesSQL Server CompactGetting started with SQL ServerDatabase MirroringSQL Server ExpressMicrosoft Drivers for PHP for SQL ServerSQL Server SearchSQL Server SpatialDatabase DesignSQL Server Master Data ServicesSQL Server ManageabilitySQL Server PowerPivot for SharePointSQL Server PowerPivot for ExcelSQL Server Application and Multi-Server ManagementSQL Server Samples and Community ProjectsMicrosoft StreamInsightSQL Server MigrationSQL Server Data Quality ServicesSQL Server Distributed Replay
-
Select allSystem Center Mobile Device Manager
-
Select allBizTalk Server GeneralBizTalk Server Adapters and Adapter PackBizTalk Server EDI and AS2BizTalk Server RFIDBizTalk Server Host Integration Server
-
Select allExchange Server 2013 - General DiscussionExchange Server 2013 - Administration, Monitoring, and PerformanceExchange Server 2013 - High Availability and Disaster RecoveryExchange Server 2013 - Outlook, OWA, POP, and IMAP ClientsExchange Server 2013 - Mobility and ActiveSyncExchange Server 2013 - Setup, Deployment, Updates, and MigrationExchange Server 2013 - Extended Components, Tools, and UtilitiesExchange Server 2013 - Mail Flow and Secure MessagingExchange Server 2013 - Unified MessagingExchange Server 2013 - Sharing and Collaboration: Site Mailboxes and Public FoldersExchange Server DevelopmentExchange Server 2013 Preview (locked)
-
Select allTechNet Website FeedbackMSDN and TechNet Search FeedbackTechNet Wiki Discussion
-
Select allForefront Identity Manager 2010
-
Select allMicrosoft Operations Framework -- MOF 4.0
-
Select allIT Management Planning and Technology
-
Select allTraining and Certification
-
Select allLive Meeting General DiscussionLive Meeting - Creating, Joining Meetings, Configurations and SettingsLive Meeting - In Meeting Experience, Console and Add-insLive Meeting - Media DiscussionLive Meeting - Rollout/Deployment Programs
Filter
:
All Threads
All Threads
Answered
Unanswered
Proposed Answers
General Discussion
No Replies
Helpful
Has Code
All Languages
-
Discussion0VotesFeature Requests
In the Excel Add in for MDS it would be very helpful to have the ability to filter based on last change date. I've had users accidentally commit changes they didn't want to commit and had trouble ...
-
Unanswered0Votes
MDSERR400038|Unpublished business rules exist. Apply the business rules before running Business Rules or Validation again.
Hi, I am getting the following error (in MDSTrace.log) when I click on 'Apply Rules'. MDS Error: 0 : Service started successfully, ... -
Unanswered0Votes
Master Data Service: how to remove the dirty data from master data service from a table using store procedure?
hello, we need to remove the dirty data from MDS, but we found we can only do this from MDS web, and we need to do this by store procedure to make this process automatically. is there any easy method ... -
Unanswered0Votes
HOW TO FORMAT AND SET-UP TO IMPORT ASCII CALIF CORP FILE BY CALIF SECRETARY OF STATE?
Dear Sir: I purchased a California Corporation file (3 Million records) from California Secretary of State. It is a ASCII format. I used a column import with fixed width (SQL ... -
Unanswered0Votes
HOW TO FORMAT AND SET-UP TO IMPORT ASCII CALIF CORP FILE BY CALIF SECRETARY OF STATE?
Dear Sir: I purchased a California Corporation file (3 Million records) from California Secretary of State. It is a ASCII format. I used a column import with fixed width (SQL ... -
Unanswered0Votes
HOW TO FORMAT AND SET-UP TO IMPORT ASCII CALIF CORP FILE BY CALIF SECRETARY OF STATE?
Dear Sir: I purchased a California Corporation file (3 Million records) from California Secretary of State. It is a ASCII format. I used a column import with fixed width (SQL ... -
Unanswered0Votes
SQL Server 2012 - MDS error
Hi All, I am using Windows Server 2008R2 with SQL Server 2012 installed, after configuring MDS when adding for the user groups i am getting the below error, can any one ... -
Unanswered0Votes
MDS 2012 Transactions not logged using MDS Staging process through SSIS
I noticed that the changes to the member attributes from Explorer UI or MDS Excel add-in can be viewed through “View Transactions”. However, if the changes are done through SSIS package ... -
Proposed0Votes
MDS Excel plugin won't push changes
I'm having trouble finding any information on how to debug this. We have been using the Excel add-in to allow data stewards to administer the MDS entities, and ordinarily this ... -
Unanswered0Votes
The Problem : When create member in MDS ,but createtime is UTC time
Problem description： We have a entity in MDS .When add a member in entity , actually in MDSDB the data creatime is ... -
Unanswered0Votes
Is it possible to display an image (.jpeg, .bmp, .tif, .png, etc) in a leat attribute either in excel with the MS addin, or in the "Out-of-the-box" Web application?
I have a product entity. One of the attributes is an image of the product. The user would like to see the picture displayed in either the excel (with the MDS addin), or in the ... -
Unanswered1Votes
Track change business rule issue
Hi there, We are intending to use the Change Tracking feature within MDS to trigger external workflows. To test this functionality, we’ve altered an ... -
Answered2Votes
End to end create model using MDS API
Please can someone supply an end to end example of using the MDS API to create a model, entity and attributes on the entity? I'd like particularly to also see how to create relationships ... -
Unanswered0Votes
Excel Add-in & NULLs
Is there a value you can use in the Excel Add-in to load a NULL value? Some user are just using copy and paste to update information in excel. When an attribute is ... -
Unanswered0Votes
Bug/limitation in Business Rules and Domain Based Attribute
I have read the other threads related to business rules and DBA's and yet it seems that this is distinct case. I believe that combining a rule "Defaults ... -
Unanswered0Votes
MDS 2012 custom workflow dll rule doesn't work from Excel add-in
Hi, I have a custom workflow dll that is configured to be called through a business rule on a condition based on member attributes being blank. The rule executes fine when the ... -
Answered0Votes
Domain-Based attribute display mode
Hi I am learning the MDS 2012 and when I was checking the ProductSample model, I noticed some of the defined domain-based attributes like country inside the product entity is ... -
Answered0Votes
Real time sync of MDS with custom databases
What I understand out of MDS is that it's a listing of your mission critical data in a single place. I create a model called "Clients", then I create an entity called "MXClients". ... -
Answered0Votes
Derived Hiearchy Issue: No Levels Defined
Out of nowhere my derived hierarchies starting showing the following message in the MDS UI No Level Defined: This Derived Hierarchy is incomplete...... As ... -
Answered0Votes
Move leaf members to Consolidated Members
Hi I have the Country and Customer entities. The Customer entity has an “Explicit hierarchies” called Geography and also has a leaf member called ... - Items 1 to 20 of 888 Next ›
.png)
