none
Error 0x80244019

    Question

  • SCCM2007 SP2 installed on a Windows 2003 R2 SP2 system, all components (DP, MP, SUP etc..) and WSUS 3.0 SP1 installed on same server.

     

    Downloaded and approved updates and created a deployment package and assigned to a test collection - however they are not installing on the clients and I am getting the following in WindowsUpdate.log on one of the clients.  Anything I have read regarding 0x80244019 has been linked with WSUS and not SCCM2007/WSUS config, hence putting the query up on here.. any help would be appreciated

     

    2008-10-17 15:20:57:582  720 cb8 Setup   * IsUpdateRequired = No
    2008-10-17 15:21:00:894  720 cb8 PT +++++++++++  PT: Synchronizing server updates  +++++++++++
    2008-10-17 15:21:00:894  720 cb8 PT   + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://sce2007/ClientWebService/client.asmx
    2008-10-17 15:21:00:956  720 cb8 PT WARNING: Cached cookie has expired or new PID is available
    2008-10-17 15:21:00:956  720 cb8 PT Initializing simple targeting cookie, clientId = d93aee65-bce9-47b7-a67d-8b4a3c624848, target group = , DNS name = <clientsystem>.domain.com
    2008-10-17 15:21:00:956  720 cb8 PT   Server URL = http://<SCCM2007SERVER>/SimpleAuthWebService/SimpleAuth.asmx
    2008-10-17 15:21:00:956  720 cb8 PT WARNING: GetAuthorizationCookie failure, error = 0x80244019, soap client error = 10, soap error code = 0, HTTP status code = 404
    2008-10-17 15:21:00:956  720 cb8 PT WARNING: Failed to initialize Simple Targeting Cookie: 0x80244019
    2008-10-17 15:21:00:956  720 cb8 PT WARNING: PopulateAuthCookies failed: 0x80244019
    2008-10-17 15:21:00:956  720 cb8 PT WARNING: RefreshCookie failed: 0x80244019
    2008-10-17 15:21:00:956  720 cb8 PT WARNING: RefreshPTState failed: 0x80244019
    2008-10-17 15:21:00:956  720 cb8 PT WARNING: Sync of Updates: 0x80244019
    2008-10-17 15:21:00:956  720 cb8 PT WARNING: SyncServerUpdatesInternal failed: 0x80244019
    2008-10-17 15:21:00:956  720 cb8 Agent   * WARNING: Failed to synchronize, error = 0x80244019
    2008-10-17 15:21:00:956  720 cb8 Agent   * WARNING: Exit code = 0x80244019
    2008-10-17 15:21:00:956  720 cb8 Agent *********
    2008-10-17 15:21:00:956  720 cb8 Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2008-10-17 15:21:00:956  720 cb8 Agent *************
    2008-10-17 15:21:00:956  720 cb8 Agent WARNING: WU client failed Searching for update with error 0x80244019
    2008-10-17 15:21:00:956  720 1914 AU >>##  RESUMED  ## AU: Search for updates [CallId = {EF7F724C-AC03-4685-AA34-8DD2860D0B26}]
    2008-10-17 15:21:00:956  720 1914 AU   # WARNING: Search callback failed, result = 0x80244019
    2008-10-17 15:21:00:956  720 1914 AU   # WARNING: Failed to find updates with error code 80244019
    2008-10-17 15:21:00:956  720 1914 AU #########
    2008-10-17 15:21:00:956  720 1914 AU ##  END  ##  AU: Search for updates [CallId = {EF7F724C-AC03-4685-AA34-8DD2860D0B26}]
    2008-10-17 15:21:00:956  720 1914 AU #############
    2008-10-17 15:21:00:956  720 1914 AU AU setting next detection timeout to 2008-10-17 19:21:00
    2008-10-17 15:21:00:956  720 1914 AU Setting AU scheduled install time to 2008-10-18 02:00:00
    2008-10-17 15:21:05:955  720 cb8 Report REPORT EVENT: {E300A681-80A6-4530-9AC4-BBCE5CA97ACC} 2008-10-17 15:21:00:956+0100 1 148 101 {00000000-0000-0000-0000-000000000000} 0 80244019 AutomaticUpdates Failure Software Synchronization Windows Update Client

    Friday, October 17, 2008 2:51 PM

All replies

  •  

    I'm having the same problem, Almost the exact same type of setup too.  Were there ever any suggestions or solutions for this?

     

    If I enable the GPO I have for WSUS I can at least get clients to try and connect to wsus directly.  When I disable the GPO (required for the SCCM Update manager I believe) I get the same error listed above.

     

    WSUS is using port 8530

    SCCM update is pointing to port 80.

    Tuesday, November 11, 2008 4:13 PM
  • Hi Halidan

     

    I managed to get past this error and was able to deploy updates to clients.  It really depends on what forums/postings you read to get an answer to this but for me I have no Windows Update GPO settings enabled at all (all set to not configured), and the local policies on the client are set to http://server.domain,com:8530 (this was picked up when clients where installed esp with the SU client agent).

     

    I have tested update deployments on a number of clients and it was successful, but haven't yet carried out a corporate wide deployment.  Other postings I have read state that you should enable a few domain GPO settings see link below:

     

    http://forums.microsoft.com/technet/showpost.aspx?postid=2421229&siteid=17

     

    hope this helps

     

    Peter

     

    Wednesday, November 12, 2008 8:44 AM
  • Hi Halidan

     

    I managed to get past this error and was able to deploy updates to clients.  It really depends on what forums/postings you read to get an answer to this but for me I have no Windows Update GPO settings enabled at all (all set to not configured), and the local policies on the client are set to  (this was picked up when clients where installed esp with the SU client agent).

     

    I have tested update deployments on a number of clients and it was successful, but haven't yet carried out a corporate wide deployment.  Other postings I have read state that you should enable a few domain GPO settings see link below:

     


     

    hope this helps

     

    Peter

     

    Peter,

    Thanks so much for that informative post, but when I clicked on the bottom link in your post, it would not work.

    Could u please explain in layman's terms the best you can how to fix this error...I get the same error when I try to use my Windows XP Home sp2 to go on the Microsoft Update webpage to update to sp3 and all the other necessary security updates...so now my laptop is very unsafe for browsing because I cannot update anything. Automatic updates is turned on, but it does not seem to be detecting the fact that I need updates such as sp3.

    I am a total newb, so please bare with me in explaining very specifically how to fix this (like if you say "open cmd," you literally have to explain to me how to do that sort of thing, since I almost never use computers except for getting on the internet and writing Word documents...I don't know much about any of the programs for "developers" or even simple programs like cmd."

    Thanks so much for your time Peter and any help you can give.

    -Luke

    Wednesday, March 27, 2013 3:44 AM