Oturum Aç
 
Ana SayfaKütüphaneEğitimIndirinSorun GidermeForumlar
BT Uzmanları için Kaynaklar >
> 
> 
add a tv tuner to be forced hardware

Yanıt add a tv tuner to be forced hardware

  • 26 Mayıs 2012 Cumartesi 16:11
     
     
    Oylamak İçin Oturum Aç
    0

    Hi,

    I have a TV Tuner ProHDTV Diamond

    The Driver and Software are installed and up to date.

    But, It can't be detect on windows 7 boot up time occasionally. Anyway to solve it out? It let me trouble.

    Could it set this tv tuner to be forced hardware, could it be solved? Or give me any idea that could solve this issue?

    Grateful if it solved!

    Thank you Very much

    fsze88

     

Tüm Yanıtlar

  • 28 Mayıs 2012 Pazartesi 07:29
     
     
    Oylamak İçin Oturum Aç
    0

    Hi,

    You’d better check the BIOS settings, especially the PCI devices settings.  In the meantime, you may check the TV tuner compatibility.

    Windows 7 Compatibility Center

    http://www.microsoft.com/windows/compatibility/windows-7/en-us/Search.aspx?l=en-us&type=Software&s=Palm%20Pilot%20TX&os=64-bit

    If the issue persists,  I suggest you contact manufacture for assistance.

    Ivan-Liu

    TechNet Community Support

     
  • 30 Mayıs 2012 Çarşamba 03:04
     
     
    Oylamak İçin Oturum Aç
    0

    Dear Ivan Liu

    I have checked BIOS setting, there is not much PCI-E setting there. Only thing I can do is Disabled C-State

    I have checked Compatibility Center, there is no details about my TV Tuner

    I asked manufacture, they advice to me change the pci-e slot.

    Any other way to fix this issue?

    Thank you!

    fsze88

     
  • 30 Mayıs 2012 Çarşamba 05:43
     
     Yanıt
    Oylamak İçin Oturum Aç
    0
    Generally speaking, it is not a plug and play device, so it should be detected at boot time. Please tighten it or replug.  When it detect failed, you'd better have a check in Device Manager, to disable and enable it for test.

    Ivan-Liu

    TechNet Community Support