none
kernel_data_inpage_error windows 8.1

    Question

  • hi i just upgrade my laptop HP G6 

    from win 7 to win 8 32 bit but after that am when ever power on my lap in the 1st step 

    am getting error KERNEL_DATA_INPAGE_ERROR please if any body know how to fix this problem 

    please help me out .... about this 

    here am sharing the dump file please click on this link https://skydrive.live.com/?mkt=en-US#cid=2393AC01559811C2&id=2393AC01559811C2%21105 

    or 

    https://skydrive.live.com/redir?resid=2393AC01559811C2%21105


    • Edited by sukhmatharu Tuesday, February 04, 2014 2:13 PM
    Tuesday, February 04, 2014 2:09 PM

Answers

  • Sukhmatharu

    There are 2 different error codes but all point to memory corruption.  In addition there MAY BE an HD issue.  Suggest you also run CHKDSK

    CHKDSK /R /F
    Chkdsk disclaimer: While performing chkdsk on the hard drive if any bad sectors are found  any data available on that sector might be lost so as usual backup your data.
    Run CHKDSK /R /F from an elevated (Run as administrator) Command Prompt.
    Do this for each hard drive on your system.
    When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter.

    Then reboot and let the test run.
    It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors.
    http://www.howtogeek.com/howto/windows-vista/guide-to-using-check-disk-in-windows-vista/


     See "CHKDSK LogFile" below in order to check the results of the test.

    CHKDSK LogFile:

    Go to Start and type in "eventvwr.msc" (without the quotes) and press Enter
    Expand the Windows logs heading, then select the Application log file entry.
    Double click on the Source column header.
    Scroll down the list until you find the Chkdsk entry (wininit for Win7) (winlogon for XP).
    Copy/paste the results into your next post. 

    These crashes were related to memory corruption (probably caused by a driver). 

    Please run this test to find which driver is causing the problem.  


    If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't know what it is you probably are not overclocking.


    Driver verifier (for complete directions see our wiki here)

    Co-Authored by  JMH3143

    BugCheck 7A, {c062d870, c000000e, 7dd0c8c0, c5b0e024}
    BugCheck 7A, {c0568cf0, c000000e, 1a0e9be0, ad19e000}
    BugCheck 7A, {c047e8d8, c000000e, 2bd4d860, 8fd1b89a}
    BugCheck 9F, {3, 85f3b028, 8280eb44, 87422c98}
    BugCheck 7A, {c0448498, c000000e, 911ed8c0, 89093810}
    BugCheck 7A, {c0443e50, c000000e, 9fc008c0, 887ca024}
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    
    BugCheck 7A, {c062d870, c000000e, 7dd0c8c0, c5b0e024}
    Probably caused by : ntkrpamp.exe ( nt! ?? ::FNODOBFM::`string'+677f )
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    BugCheck 7A, {c0568cf0, c000000e, 1a0e9be0, ad19e000}
    Probably caused by : ntkrpamp.exe ( nt! ?? ::FNODOBFM::`string'+677f )
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    BugCheck 7A, {c047e8d8, c000000e, 2bd4d860, 8fd1b89a}
    Probably caused by : memory_corruption
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    BugCheck 9F, {3, 85f3b028, 8280eb44, 87422c98}
    Probably caused by : usbohci.sys
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    BugCheck 7A, {c0448498, c000000e, 911ed8c0, 89093810}
    Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+255 )
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    BugCheck 7A, {c0443e50, c000000e, 9fc008c0, 887ca024}
    Probably caused by : ntkrpamp.exe ( nt! ?? ::FNODOBFM::`string'+677f )
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    SYSTEM UP-TIME
    System Uptime: 0 days 3:58:31.618
    System Uptime: 0 days 6:54:35.561
    System Uptime: 0 days 8:57:26.897
    System Uptime: 0 days 0:36:06.202
    System Uptime: 0 days 5:43:05.852
    System Uptime: 0 days 6:40:35.564
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    
    
    
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    Debug session time: Mon Feb  3 10:58:22.655 2014 (UTC - 5:00)
    System Uptime: 0 days 3:58:31.618
    BugCheck 7A, {c062d870, c000000e, 7dd0c8c0, c5b0e024}
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : ntkrpamp.exe ( nt! ?? ::FNODOBFM::`string'+677f )
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    Debug session time: Sun Feb  2 08:49:57.655 2014 (UTC - 5:00)
    System Uptime: 0 days 6:54:35.561
    BugCheck 7A, {c0568cf0, c000000e, 1a0e9be0, ad19e000}
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : ntkrpamp.exe ( nt! ?? ::FNODOBFM::`string'+677f )
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    Debug session time: Sat Feb  1 23:08:40.934 2014 (UTC - 5:00)
    System Uptime: 0 days 8:57:26.897
    BugCheck 7A, {c047e8d8, c000000e, 2bd4d860, 8fd1b89a}
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : memory_corruption
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    Debug session time: Sat Feb  1 12:33:57.178 2014 (UTC - 5:00)
    System Uptime: 0 days 0:36:06.202
    BugCheck 9F, {3, 85f3b028, 8280eb44, 87422c98}
    Probably caused by : usbohci.sys
    BUGCHECK_STR:  0x9F
    PROCESS_NAME:  System
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    Debug session time: Sat Feb  1 09:38:53.657 2014 (UTC - 5:00)
    System Uptime: 0 days 5:43:05.852
    BugCheck 7A, {c0448498, c000000e, 911ed8c0, 89093810}
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+255 )
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    Debug session time: Sat Feb  1 03:55:18.664 2014 (UTC - 5:00)
    System Uptime: 0 days 6:40:35.564
    BugCheck 7A, {c0443e50, c000000e, 9fc008c0, 887ca024}
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : ntkrpamp.exe ( nt! ?? ::FNODOBFM::`string'+677f )
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    
    
    

    Debug session time: Mon Feb  3 10:58:22.655 2014 (UTC - 5:00)
    Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020314-15515-01.dmp]
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    System Uptime: 0 days 3:58:31.618
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : ntkrpamp.exe ( nt! ?? ::FNODOBFM::`string'+677f )
    BugCheck 7A, {c062d870, c000000e, 7dd0c8c0, c5b0e024}
    BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]KERNEL_DATA_INPAGE_ERROR (7a)[/url]
    Bugcheck code 0000007A
    Arguments: 
    Arg1: c062d870, lock type that was held (value 1,2,3, or PTE address)
    Arg2: c000000e, error status (normally i/o status code)
    Arg3: 7dd0c8c0, current process (virtual address for lock type 3, or PTE)
    Arg4: c5b0e024, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
    DISK_HARDWARE_ERROR: There was error with disk hardware
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID:  0x7a_c000000e_nt!_??_::FNODOBFM::_string_
    BiosVersion = F.48
    BiosReleaseDate = 10/23/2012
    SystemManufacturer = Hewlett-Packard
    SystemProductName = HP Pavilion g6 Notebook PC
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Debug session time: Sun Feb  2 08:49:57.655 2014 (UTC - 5:00)
    Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020214-28843-01.dmp]
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    System Uptime: 0 days 6:54:35.561
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : ntkrpamp.exe ( nt! ?? ::FNODOBFM::`string'+677f )
    BugCheck 7A, {c0568cf0, c000000e, 1a0e9be0, ad19e000}
    BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]KERNEL_DATA_INPAGE_ERROR (7a)[/url]
    Bugcheck code 0000007A
    Arguments: 
    Arg1: c0568cf0, lock type that was held (value 1,2,3, or PTE address)
    Arg2: c000000e, error status (normally i/o status code)
    Arg3: 1a0e9be0, current process (virtual address for lock type 3, or PTE)
    Arg4: ad19e000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
    DISK_HARDWARE_ERROR: There was error with disk hardware
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID:  0x7a_c000000e_nt!_??_::FNODOBFM::_string_
    BiosVersion = F.48
    BiosReleaseDate = 10/23/2012
    SystemManufacturer = Hewlett-Packard
    SystemProductName = HP Pavilion g6 Notebook PC
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Debug session time: Sat Feb  1 23:08:40.934 2014 (UTC - 5:00)
    Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020214-16937-01.dmp]
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    System Uptime: 0 days 8:57:26.897
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : memory_corruption
    BugCheck 7A, {c047e8d8, c000000e, 2bd4d860, 8fd1b89a}
    BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]KERNEL_DATA_INPAGE_ERROR (7a)[/url]
    Bugcheck code 0000007A
    Arguments: 
    Arg1: c047e8d8, lock type that was held (value 1,2,3, or PTE address)
    Arg2: c000000e, error status (normally i/o status code)
    Arg3: 2bd4d860, current process (virtual address for lock type 3, or PTE)
    Arg4: 8fd1b89a, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
    DISK_HARDWARE_ERROR: There was error with disk hardware
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID:  MEMORY_CORRUPTION_LARGE_4096
    BiosVersion = F.48
    BiosReleaseDate = 10/23/2012
    SystemManufacturer = Hewlett-Packard
    SystemProductName = HP Pavilion g6 Notebook PC
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Debug session time: Sat Feb  1 12:33:57.178 2014 (UTC - 5:00)
    Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020114-18750-01.dmp]
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    System Uptime: 0 days 0:36:06.202
    Probably caused by : usbohci.sys
    BugCheck 9F, {3, 85f3b028, 8280eb44, 87422c98}
    BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]DRIVER_POWER_STATE_FAILURE (9f)[/url]
    Bugcheck code 0000009F
    Arguments: 
    Arg1: 00000003, A device object has been blocking an Irp for too long a time
    Arg2: 85f3b028, Physical Device Object of the stack
    Arg3: 8280eb44, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
    Arg4: 87422c98, The blocked IRP
    BUGCHECK_STR:  0x9F
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID:  0x9F_3_usbhub_IMAGE_usbohci.sys
    BiosVersion = F.48
    BiosReleaseDate = 10/23/2012
    SystemManufacturer = Hewlett-Packard
    SystemProductName = HP Pavilion g6 Notebook PC
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Debug session time: Sat Feb  1 09:38:53.657 2014 (UTC - 5:00)
    Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020114-17046-01.dmp]
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    System Uptime: 0 days 5:43:05.852
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+255 )
    BugCheck 7A, {c0448498, c000000e, 911ed8c0, 89093810}
    BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]KERNEL_DATA_INPAGE_ERROR (7a)[/url]
    Bugcheck code 0000007A
    Arguments: 
    Arg1: c0448498, lock type that was held (value 1,2,3, or PTE address)
    Arg2: c000000e, error status (normally i/o status code)
    Arg3: 911ed8c0, current process (virtual address for lock type 3, or PTE)
    Arg4: 89093810, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
    DISK_HARDWARE_ERROR: There was error with disk hardware
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID:  0x7a_c000000e_nt!ExDeferredFreePool
    BiosVersion = F.48
    BiosReleaseDate = 10/23/2012
    SystemManufacturer = Hewlett-Packard
    SystemProductName = HP Pavilion g6 Notebook PC
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Debug session time: Sat Feb  1 03:55:18.664 2014 (UTC - 5:00)
    Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020114-18953-01.dmp]
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    System Uptime: 0 days 6:40:35.564
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : ntkrpamp.exe ( nt! ?? ::FNODOBFM::`string'+677f )
    BugCheck 7A, {c0443e50, c000000e, 9fc008c0, 887ca024}
    BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]KERNEL_DATA_INPAGE_ERROR (7a)[/url]
    Bugcheck code 0000007A
    Arguments: 
    Arg1: c0443e50, lock type that was held (value 1,2,3, or PTE address)
    Arg2: c000000e, error status (normally i/o status code)
    Arg3: 9fc008c0, current process (virtual address for lock type 3, or PTE)
    Arg4: 887ca024, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
    DISK_HARDWARE_ERROR: There was error with disk hardware
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID:  0x7a_c000000e_nt!_??_::FNODOBFM::_string_
    BiosVersion = F.48
    BiosReleaseDate = 10/23/2012
    SystemManufacturer = Hewlett-Packard
    SystemProductName = HP Pavilion g6 Notebook PC


    Wanikiya and Dyami--Team Zigzag


    Tuesday, February 04, 2014 2:36 PM
    Moderator

All replies

  • Sukhmatharu

    There are 2 different error codes but all point to memory corruption.  In addition there MAY BE an HD issue.  Suggest you also run CHKDSK

    CHKDSK /R /F
    Chkdsk disclaimer: While performing chkdsk on the hard drive if any bad sectors are found  any data available on that sector might be lost so as usual backup your data.
    Run CHKDSK /R /F from an elevated (Run as administrator) Command Prompt.
    Do this for each hard drive on your system.
    When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter.

    Then reboot and let the test run.
    It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors.
    http://www.howtogeek.com/howto/windows-vista/guide-to-using-check-disk-in-windows-vista/


     See "CHKDSK LogFile" below in order to check the results of the test.

    CHKDSK LogFile:

    Go to Start and type in "eventvwr.msc" (without the quotes) and press Enter
    Expand the Windows logs heading, then select the Application log file entry.
    Double click on the Source column header.
    Scroll down the list until you find the Chkdsk entry (wininit for Win7) (winlogon for XP).
    Copy/paste the results into your next post. 

    These crashes were related to memory corruption (probably caused by a driver). 

    Please run this test to find which driver is causing the problem.  


    If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't know what it is you probably are not overclocking.


    Driver verifier (for complete directions see our wiki here)

    Co-Authored by  JMH3143

    BugCheck 7A, {c062d870, c000000e, 7dd0c8c0, c5b0e024}
    BugCheck 7A, {c0568cf0, c000000e, 1a0e9be0, ad19e000}
    BugCheck 7A, {c047e8d8, c000000e, 2bd4d860, 8fd1b89a}
    BugCheck 9F, {3, 85f3b028, 8280eb44, 87422c98}
    BugCheck 7A, {c0448498, c000000e, 911ed8c0, 89093810}
    BugCheck 7A, {c0443e50, c000000e, 9fc008c0, 887ca024}
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    
    BugCheck 7A, {c062d870, c000000e, 7dd0c8c0, c5b0e024}
    Probably caused by : ntkrpamp.exe ( nt! ?? ::FNODOBFM::`string'+677f )
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    BugCheck 7A, {c0568cf0, c000000e, 1a0e9be0, ad19e000}
    Probably caused by : ntkrpamp.exe ( nt! ?? ::FNODOBFM::`string'+677f )
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    BugCheck 7A, {c047e8d8, c000000e, 2bd4d860, 8fd1b89a}
    Probably caused by : memory_corruption
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    BugCheck 9F, {3, 85f3b028, 8280eb44, 87422c98}
    Probably caused by : usbohci.sys
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    BugCheck 7A, {c0448498, c000000e, 911ed8c0, 89093810}
    Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+255 )
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    BugCheck 7A, {c0443e50, c000000e, 9fc008c0, 887ca024}
    Probably caused by : ntkrpamp.exe ( nt! ?? ::FNODOBFM::`string'+677f )
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    SYSTEM UP-TIME
    System Uptime: 0 days 3:58:31.618
    System Uptime: 0 days 6:54:35.561
    System Uptime: 0 days 8:57:26.897
    System Uptime: 0 days 0:36:06.202
    System Uptime: 0 days 5:43:05.852
    System Uptime: 0 days 6:40:35.564
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    
    
    
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    Debug session time: Mon Feb  3 10:58:22.655 2014 (UTC - 5:00)
    System Uptime: 0 days 3:58:31.618
    BugCheck 7A, {c062d870, c000000e, 7dd0c8c0, c5b0e024}
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : ntkrpamp.exe ( nt! ?? ::FNODOBFM::`string'+677f )
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    Debug session time: Sun Feb  2 08:49:57.655 2014 (UTC - 5:00)
    System Uptime: 0 days 6:54:35.561
    BugCheck 7A, {c0568cf0, c000000e, 1a0e9be0, ad19e000}
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : ntkrpamp.exe ( nt! ?? ::FNODOBFM::`string'+677f )
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    Debug session time: Sat Feb  1 23:08:40.934 2014 (UTC - 5:00)
    System Uptime: 0 days 8:57:26.897
    BugCheck 7A, {c047e8d8, c000000e, 2bd4d860, 8fd1b89a}
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : memory_corruption
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    Debug session time: Sat Feb  1 12:33:57.178 2014 (UTC - 5:00)
    System Uptime: 0 days 0:36:06.202
    BugCheck 9F, {3, 85f3b028, 8280eb44, 87422c98}
    Probably caused by : usbohci.sys
    BUGCHECK_STR:  0x9F
    PROCESS_NAME:  System
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    Debug session time: Sat Feb  1 09:38:53.657 2014 (UTC - 5:00)
    System Uptime: 0 days 5:43:05.852
    BugCheck 7A, {c0448498, c000000e, 911ed8c0, 89093810}
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+255 )
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    Debug session time: Sat Feb  1 03:55:18.664 2014 (UTC - 5:00)
    System Uptime: 0 days 6:40:35.564
    BugCheck 7A, {c0443e50, c000000e, 9fc008c0, 887ca024}
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : ntkrpamp.exe ( nt! ?? ::FNODOBFM::`string'+677f )
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    
    
    

    Debug session time: Mon Feb  3 10:58:22.655 2014 (UTC - 5:00)
    Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020314-15515-01.dmp]
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    System Uptime: 0 days 3:58:31.618
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : ntkrpamp.exe ( nt! ?? ::FNODOBFM::`string'+677f )
    BugCheck 7A, {c062d870, c000000e, 7dd0c8c0, c5b0e024}
    BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]KERNEL_DATA_INPAGE_ERROR (7a)[/url]
    Bugcheck code 0000007A
    Arguments: 
    Arg1: c062d870, lock type that was held (value 1,2,3, or PTE address)
    Arg2: c000000e, error status (normally i/o status code)
    Arg3: 7dd0c8c0, current process (virtual address for lock type 3, or PTE)
    Arg4: c5b0e024, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
    DISK_HARDWARE_ERROR: There was error with disk hardware
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID:  0x7a_c000000e_nt!_??_::FNODOBFM::_string_
    BiosVersion = F.48
    BiosReleaseDate = 10/23/2012
    SystemManufacturer = Hewlett-Packard
    SystemProductName = HP Pavilion g6 Notebook PC
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Debug session time: Sun Feb  2 08:49:57.655 2014 (UTC - 5:00)
    Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020214-28843-01.dmp]
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    System Uptime: 0 days 6:54:35.561
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : ntkrpamp.exe ( nt! ?? ::FNODOBFM::`string'+677f )
    BugCheck 7A, {c0568cf0, c000000e, 1a0e9be0, ad19e000}
    BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]KERNEL_DATA_INPAGE_ERROR (7a)[/url]
    Bugcheck code 0000007A
    Arguments: 
    Arg1: c0568cf0, lock type that was held (value 1,2,3, or PTE address)
    Arg2: c000000e, error status (normally i/o status code)
    Arg3: 1a0e9be0, current process (virtual address for lock type 3, or PTE)
    Arg4: ad19e000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
    DISK_HARDWARE_ERROR: There was error with disk hardware
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID:  0x7a_c000000e_nt!_??_::FNODOBFM::_string_
    BiosVersion = F.48
    BiosReleaseDate = 10/23/2012
    SystemManufacturer = Hewlett-Packard
    SystemProductName = HP Pavilion g6 Notebook PC
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Debug session time: Sat Feb  1 23:08:40.934 2014 (UTC - 5:00)
    Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020214-16937-01.dmp]
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    System Uptime: 0 days 8:57:26.897
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : memory_corruption
    BugCheck 7A, {c047e8d8, c000000e, 2bd4d860, 8fd1b89a}
    BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]KERNEL_DATA_INPAGE_ERROR (7a)[/url]
    Bugcheck code 0000007A
    Arguments: 
    Arg1: c047e8d8, lock type that was held (value 1,2,3, or PTE address)
    Arg2: c000000e, error status (normally i/o status code)
    Arg3: 2bd4d860, current process (virtual address for lock type 3, or PTE)
    Arg4: 8fd1b89a, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
    DISK_HARDWARE_ERROR: There was error with disk hardware
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID:  MEMORY_CORRUPTION_LARGE_4096
    BiosVersion = F.48
    BiosReleaseDate = 10/23/2012
    SystemManufacturer = Hewlett-Packard
    SystemProductName = HP Pavilion g6 Notebook PC
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Debug session time: Sat Feb  1 12:33:57.178 2014 (UTC - 5:00)
    Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020114-18750-01.dmp]
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    System Uptime: 0 days 0:36:06.202
    Probably caused by : usbohci.sys
    BugCheck 9F, {3, 85f3b028, 8280eb44, 87422c98}
    BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]DRIVER_POWER_STATE_FAILURE (9f)[/url]
    Bugcheck code 0000009F
    Arguments: 
    Arg1: 00000003, A device object has been blocking an Irp for too long a time
    Arg2: 85f3b028, Physical Device Object of the stack
    Arg3: 8280eb44, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
    Arg4: 87422c98, The blocked IRP
    BUGCHECK_STR:  0x9F
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID:  0x9F_3_usbhub_IMAGE_usbohci.sys
    BiosVersion = F.48
    BiosReleaseDate = 10/23/2012
    SystemManufacturer = Hewlett-Packard
    SystemProductName = HP Pavilion g6 Notebook PC
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Debug session time: Sat Feb  1 09:38:53.657 2014 (UTC - 5:00)
    Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020114-17046-01.dmp]
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    System Uptime: 0 days 5:43:05.852
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+255 )
    BugCheck 7A, {c0448498, c000000e, 911ed8c0, 89093810}
    BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]KERNEL_DATA_INPAGE_ERROR (7a)[/url]
    Bugcheck code 0000007A
    Arguments: 
    Arg1: c0448498, lock type that was held (value 1,2,3, or PTE address)
    Arg2: c000000e, error status (normally i/o status code)
    Arg3: 911ed8c0, current process (virtual address for lock type 3, or PTE)
    Arg4: 89093810, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
    DISK_HARDWARE_ERROR: There was error with disk hardware
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID:  0x7a_c000000e_nt!ExDeferredFreePool
    BiosVersion = F.48
    BiosReleaseDate = 10/23/2012
    SystemManufacturer = Hewlett-Packard
    SystemProductName = HP Pavilion g6 Notebook PC
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    Debug session time: Sat Feb  1 03:55:18.664 2014 (UTC - 5:00)
    Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020114-18953-01.dmp]
    Built by: 9600.16452.x86fre.winblue_gdr.131030-1505
    System Uptime: 0 days 6:40:35.564
    *** WARNING: Unable to verify timestamp for atapi.sys
    *** ERROR: Module load completed but symbols could not be loaded for atapi.sys
    Probably caused by : ntkrpamp.exe ( nt! ?? ::FNODOBFM::`string'+677f )
    BugCheck 7A, {c0443e50, c000000e, 9fc008c0, 887ca024}
    BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]KERNEL_DATA_INPAGE_ERROR (7a)[/url]
    Bugcheck code 0000007A
    Arguments: 
    Arg1: c0443e50, lock type that was held (value 1,2,3, or PTE address)
    Arg2: c000000e, error status (normally i/o status code)
    Arg3: 9fc008c0, current process (virtual address for lock type 3, or PTE)
    Arg4: 887ca024, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
    DISK_HARDWARE_ERROR: There was error with disk hardware
    BUGCHECK_STR:  0x7a_c000000e
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID:  0x7a_c000000e_nt!_??_::FNODOBFM::_string_
    BiosVersion = F.48
    BiosReleaseDate = 10/23/2012
    SystemManufacturer = Hewlett-Packard
    SystemProductName = HP Pavilion g6 Notebook PC


    Wanikiya and Dyami--Team Zigzag


    Tuesday, February 04, 2014 2:36 PM
    Moderator
  • Is malwarebytes disable at start up. If not and you have windows defender running you will get theses errors.

    I suggest leaving Defender as your main virus unless you go with a whole new security system. Which includes antivirus/malware. If you do choose to use other make sure you disable all MS features.

    Windows firewall/defender and disable the service and shut down any automatic startup function. Then you can start to install the new security.

    Run malwarebytes manually

    Tuesday, February 04, 2014 2:48 PM
  • Replace the disk or your memory

    Edit: there are many reason which can cause this. Virus is the known type. That can lead to HD error in blocks and sectors. I'd replace the disk soon. Edit:

    This could be bad memory as well. But my gut is telling me HD


    • Edited by colakid Tuesday, February 04, 2014 3:04 PM
    Tuesday, February 04, 2014 2:54 PM
  • your ran sfc /scannow

    run this first

    Dism /Online /Cleanup-Image /RestoreHealth

    in elevated command

    reboot

    then run sfc /scannow

    Tuesday, February 04, 2014 3:01 PM