none
Microsoft-Windows-Kernel-Power

    General discussion

  • I built a new PC and i keep getting this error randomally.  I have even tested the memory in windows and mem86 program and the memory tested out ok.  The memory is also tested and approved by the mother board.  The massage is this in my logss.  IT also happens if i run a test on th preformance of the PC it will blue screnn and drop.  I have updated all the drivers , and even changes the power supply from 630 to 700.  The bios is the latest asus bios

     

    I am running a 2.8 AMD 6 core processor w/ M4A89GTD PRO/USB3 asus, 4 gb memory 2 sticks, w/ creative fx titainium, pic x 1 card and a saphire 1 gb card with 256 bit listed as an ati raidon HD 4800 series w/ a 1TB WD drive 6gb transfer drive.

     

    I need help badly.

    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
      <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
      <EventID>41</EventID>
      <Version>2</Version>
      <Level>1</Level>
      <Task>63</Task>
      <Opcode>0</Opcode>
      <Keywords>0x8000000000000002</Keywords>
      <TimeCreated SystemTime="2010-06-22T00:04:37.761621400Z" />
      <EventRecordID>11165</EventRecordID>
      <Correlation />
      <Execution ProcessID="4" ThreadID="8" />
      <Channel>System</Channel>
      <Computer></Computer>
      <Security UserID="S-1-5-18" />
      </System>
    - <EventData>
      <Data Name="BugcheckCode">0</Data>
      <Data Name="BugcheckParameter1">0x0</Data>
      <Data Name="BugcheckParameter2">0x0</Data>
      <Data Name="BugcheckParameter3">0x0</Data>
      <Data Name="BugcheckParameter4">0x0</Data>
      <Data Name="SleepInProgress">false</Data>
      <Data Name="PowerButtonTimestamp">0</Data>
      </EventData>
      </Event>
    • Edited by UserTech410 Wednesday, June 23, 2010 2:05 PM
    Tuesday, June 22, 2010 12:24 AM

All replies

  • This can be closed seems the memory was on the verge of going bad.  However this was not the case at the beginning when it was first tested.  After puting the system together and using it for a day or 2 and 1 day after this post i desided to check the memory again one stick did fail.  When i pulled it out the system became stable from what i can tell.

    I do not have the replacement memory sticks yet and was only running it on one 2Gb stick.

    Wednesday, June 23, 2010 2:03 PM
  • Recevied new memory yesterday seems to be stable its not blue screening anymore or giving any kernal issue.

     

    Seems memory can go bad more then i thought.  Also looks like 90% of the kernal type errors are caused by either bad memory or incorrect settings in the bios.

    Thursday, June 24, 2010 6:54 PM