locked
Error 80070570 while installing Windows 8 CP

    Question

  • I have downloaded the Windows 8 CP iso, and have validated the
    download checksum (actually done this twice). I have tried installing
    from both a DVD and from a USB key, with identical results. Error
    80070570 occurs while expanding files at about 15% or so. I have tried
    unplugging everything except for the keyboard and mouse. The results
    are the same every time. The installation is onto a new hard drive and
    an empty partition on that drive. The one significant installation
    point is that a driver has to be loaded before doing the setup, since
    the hard drive is on a SATA controller which is not natively supported by the setup. But
    after loading that driver, setup finds the controller and the drives on
    it, and is happy to install there. In fact, the setup logs below are
    written on that drive.

    Computer is a Dell Studio XPS 9000 with 12GB of memory, and two different SATA controllers (one RAID - on motherboard). The BIOS SATA mode is set to "RAID" which is required because of the RAID array on one of the two controllers.

    The setup error log is below:

    2012-03-19 06:15:45, Error [0x0600af] IBS ApplyWIMCallback:
    Error applying
    O:\Windows\WinSxS\amd64_mcx2.inf_31bf3856ad364e35_6.2.8250.0_none_4179f9bc60f8b120\Mcx2.inf.
    GLE [1392][gle=0x00000570]
    2012-03-19 06:15:45, Error [0x0606cc] IBS WIMApplyImage failed; hr = 0x80070570[gle=0x00000570]
    2012-03-19 06:15:45, Error [0x0600a1] IBS DeployImage:Image application failed; hr = 0x80070570[gle=0x00000570]
    2012-03-19
    06:15:45, Error [0x060082] IBS Callback_ImageTransfer:Failed to
    lay down the OS image; hr = 0x80070570[gle=0x00000570]

    However, this is the setup log from around the error (the full setup log is too long to post here (about 315000 characters long):

    2012-03-19 06:10:41, Info SetupSetVolume: Marking [O:\] for tracking as [InstallVolume]
    2012-03-19
    06:10:41, Info [0x06021f] IBS Callback_PrepareSystemVolume:
    Current Setup phase is 2 (had started from phase 2)
    2012-03-19 06:10:41, Info [0x060220] IBS Callback_PrepareSystemVolume: Gathering information required to boot Windows.
    2012-03-19
    06:10:41, Info IBS GetMachineInfo found boot
    disk/partition information on black board. Boot disk number [0] parition
    offset = [0x3c3f00000]
    2012-03-19 06:10:41, Info
    IBSLIB Compliance checks found a boot disk 0 that contains a system
    volume at offset [0x3c3f00000] and meets criteria
    2012-03-19 06:10:41, Info IBSLIB Disk is compliant for this operation
    2012-03-19 06:10:41, Info IBS PrepareVolumeAsSystemVol: Found system volume
    2012-03-19 06:10:41, Info IBSLIB Disk is compliant for this operation
    2012-03-19
    06:10:41, Info IBS GetMachineInfo found boot
    disk/partition information on black board. Boot disk number [0] parition
    offset = [0x3c3f00000]
    2012-03-19 06:10:41, Info SetupSetVolume: Marking [C:\] for tracking as [SystemVolume]
    2012-03-19 06:10:41, Info SetupSetVolume: Marking [O:\] for tracking as [TildeBTVolume]
    2012-03-19
    06:10:41, Info IBS Callback_Engine_ReInitialize:New
    working directory is [O:\$WINDOWS.~BT\Sources\Panther]
    2012-03-19 06:10:41, Info IBS Callback_Engine_ReInitialize:Successfully intialized the panther engine.
    2012-03-19 06:10:41, Info [0x060287] IBS Setup was started at 2012-03-19 06:00:21
    2012-03-19 06:10:41, Info [0x060288] IBS Install Source is X:\Sources
    2012-03-19 06:10:41, Info IBS Build version is 6.2.8250.0 (winmain_win8beta.120217-1520)
    2012-03-19
    06:10:41, Info [0x06403f] IBSLIB CreateSetupBlackboard:Creating a
    new persistent blackboard. Path is
    [O:\$WINDOWS.~BT\Sources\Panther\SetupInfo] Setup phase is [2]
    2012-03-19 06:10:41, Info [0x090008] PANTHR CBlackboard::Open: O:\$WINDOWS.~BT\Sources\Panther\SetupInfo succeeded.
    2012-03-19
    06:10:41, Info [0x064043] IBSLIB
    CreateSetupBlackboard:Successfully created/opened Setup black board path
    is [O:\$WINDOWS.~BT\Sources\Panther\SetupInfo]
    2012-03-19 06:10:42, Info [0x090009] PANTHR CBlackboard::Close: x:\windows\panther\setupinfo.
    2012-03-19
    06:10:42, Info IBS
    Callback_Engine_ReInitialize:Successfully created a persistent
    blackboard and copied all the data.
    2012-03-19 06:10:42, Info SetupSetVolume: Marking [O:\] for tracking as [TildeLSVolume]
    2012-03-19
    06:10:42, Info [0x060109] IBS CreateSetupLocalFolder:
    Successfully created local sources folder tree at
    [O:\$WINDOWS.~LS\Sources]
    2012-03-19 06:10:42, Info [0x0600f3]
    IBS CallBack_PickTempDrive_CreateSetupLocalFolder:Successfully
    created the local sources folder.
    2012-03-19 06:10:42, Info [0x06050f] IBS Entering Callback_Rollback_InitializeRollback
    2012-03-19 06:10:42, Info [0x064147] IBSLIB RollbackInitialize in progress...
    2012-03-19 06:10:42, Info [0x064148] IBSLIB RollbackInitialize finished.
    2012-03-19 06:10:42, Info [0x06412c] IBSLIB SetCheckpoint: Checkpoint("StartPhaseCleanUpCheckpoint") in progress...
    2012-03-19
    06:10:42, Info IBSLIB TrackVolume: Successfully marked
    that [$Setup_BTFolderVolume$] is on drive [O:].
    2012-03-19 06:10:42,
    Info IBSLIB TrackVolume: Successfully marked that
    [$Setup_LSFolderVolume$] is on drive [O:].
    2012-03-19 06:10:42, Info [0x06412e] IBSLIB SetCheckpoint: Checkpoint "StartPhaseCleanUpCheckpoint" successfully set.
    2012-03-19 06:10:42, Info [0x06412c] IBSLIB SetCheckpoint: Checkpoint("WinPEPrepareInstallDriveCheckpoint") in progress...
    2012-03-19
    06:10:42, Info IBSLIB TrackVolume: Successfully marked
    that [$Setup_InstallVolume$] is on drive [O:].
    2012-03-19 06:10:42,
    Info [0x06412e] IBSLIB SetCheckpoint: Checkpoint
    "WinPEPrepareInstallDriveCheckpoint" successfully set.
    2012-03-19
    06:10:42, Info [0x06412c] IBSLIB SetCheckpoint:
    Checkpoint("StartPhaseSystemVolumeSelectedCheckpoint") in progress...
    2012-03-19 06:10:42, Info IBSLIB TrackVolume: Successfully marked that [$Setup_SystemVolume$] is on drive [C:].
    2012-03-19
    06:10:42, Warning [0x0606cc] IBS DeleteFileEx: Unable to clear
    out attributes on [O:\$WINDOWS.~BT\Sources\Rollback\bootsec.dat]; GLE =
    0x2
    2012-03-19 06:10:42, Info [0x064157] IBSLIB CSystemVolumeSelectionCheckpoint: Successfully saved Boot Sector.
    2012-03-19 06:10:42, Info [0x0606cc] IBS GetSystemDiskNTPath: Found system disk at [\Device\Harddisk0\DR0].
    2012-03-19 06:10:42, Info [0x0606cc] IBS GetSystemDiskNumber: Disk [0] is the system disk.
    2012-03-19 06:10:42, Info [0x064159] IBSLIB CSystemVolumeSelectionCheckpoint: Successfully saved MBR.
    2012-03-19 06:10:42, Info [0x06415c] IBSLIB CSystemVolumeSelectionCheckpoint: C:\boot.ini does not exist, skip.
    2012-03-19 06:10:42, Info [0x06415c] IBSLIB CSystemVolumeSelectionCheckpoint: C:\ntldr does not exist, skip.
    2012-03-19 06:10:42, Info [0x06415c] IBSLIB CSystemVolumeSelectionCheckpoint: C:\NTDETECT.COM does not exist, skip.
    2012-03-19
    06:10:42, Info [0x06415e] IBSLIB
    CSystemVolumeSelectionCheckpoint: Successfully copied "C:\bootmgr" to
    "O:\$WINDOWS.~BT\Sources\Rollback\bootmgr".
    2012-03-19 06:10:44, Info IBSLIB CSystemVolumeSelectionCheckpoint: Successfully saved BCD[C:\Boot\BCD].
    2012-03-19 06:10:44, Info [0x06415f] IBSLIB CSystemVolumeSelectionCheckpoint: Successfully saved "C:\Boot".
    2012-03-19
    06:10:44, Info [0x06412e] IBSLIB SetCheckpoint: Checkpoint
    "StartPhaseSystemVolumeSelectedCheckpoint" successfully set.
    2012-03-19 06:10:44, Info [0x06412c] IBSLIB SetCheckpoint: Checkpoint("WinPEBootFilesRestoreCheckpoint") in progress...
    2012-03-19 06:10:44, Info [0x06412e] IBSLIB SetCheckpoint: Checkpoint "WinPEBootFilesRestoreCheckpoint" successfully set.
    2012-03-19 06:10:44, Info [0x060510] IBS Leaving Callback_Rollback_InitializeRollback (success)
    2012-03-19 06:10:44, Info IBS ResumeUnfinishedSourcesDownloadJob: Enter....
    2012-03-19
    06:10:44, Info IBS
    ResumeUnfinishedSourcesDownloadJob: Current setup phase is not
    downlevel. There's nothing to do.
    2012-03-19 06:10:44, Info
    SetupCopyQueueAdd:Not adding [E:\Sources\install.wim] on
    media [0] to Setup copy queue.
    2012-03-19 06:10:44, Info
    IBS Callback_AddOSImageToCopyQueue:Successfully added Windows
    image files to Setup copy queue.
    2012-03-19 06:10:44, Info IBS CallBack_LanguagePack_AddToSetupCopyQueue:Target language is [en-US]
    2012-03-19
    06:10:44, Info IBS
    CallBack_LanguagePack_AddToSetupCopyQueue:Language [en-US] is already
    installed in image. Not adding it to copy queue.
    2012-03-19
    06:10:44, Info IBS InitCopySetupFiles:Successfully
    published event requesting modules to add files to copy queue.
    2012-03-19 06:10:44, Info IBS InitCopySetupFiles:Total bytes needed to copy [0]
    2012-03-19 06:10:44, Info [0x0a0023] UI progress task ProgressInfo\CopySetupFiles : StartProgress
    2012-03-19 06:10:44, Info IBS CopySetupFiles:Copied any files from media '#0
    2012-03-19 06:10:44, Info [0x0a0024] UI progress task ProgressInfo\CopySetupFiles : EndProgress
    2012-03-19 06:10:44, Info [0x060389] IBS CallBack_CreatePageFile:Page file path is [\??\O:\WinPEpge.sys]
    2012-03-19
    06:10:44, Info [0x06038a] IBS CallBack_CreatePageFile:Page
    file [\??\O:\WinPEpge.sys] already exists, trying to delete it
    2012-03-19 06:10:44, Info [0x06412c] IBSLIB SetCheckpoint: Checkpoint("WinPECreatePagefileStartCheckpoint") in progress...
    2012-03-19
    06:10:44, Info [0x06412e] IBSLIB SetCheckpoint: Checkpoint
    "WinPECreatePagefileStartCheckpoint" successfully set.
    2012-03-19 06:10:44, Info [0x06412c] IBSLIB SetCheckpoint: Checkpoint("WinPECreatePagefileDoneCheckpoint") in progress...
    2012-03-19
    06:10:44, Info [0x06412e] IBSLIB SetCheckpoint: Checkpoint
    "WinPECreatePagefileDoneCheckpoint" successfully set.
    2012-03-19
    06:10:44, Info [0x06038c] IBS
    CallBack_CreatePageFile:Successfully created paging file at
    [\??\O:\WinPEpge.sys]
    2012-03-19 06:10:44, Info [0x0640d2] IBSLIB [Setup Disk Usage] ------ Drive O: ------
    2012-03-19 06:10:44, Info [0x0640d3] IBSLIB [Setup Disk Usage] Total bytes on drive: 715048.0 MB (749782167552 bytes)
    2012-03-19
    06:10:44, Info [0x0640d4] IBSLIB [Setup Disk Usage] Free bytes
    available to user: 714300.4 MB (748998270976 bytes)
    2012-03-19 06:10:44, Info [0x0640d6] IBSLIB [Setup Disk Usage] Found Setup folder/file [BT Folder ].
    2012-03-19 06:10:44, Info [0x0640d6] IBSLIB [Setup Disk Usage] Found Setup folder/file [LS Folder ].
    2012-03-19 06:10:44, Info [0x060093] IBS DeployOSImage:Successfully opened and resolved image
    2012-03-19 06:10:44, Info [0x060095] IBS DeployOSImage:Destination drive = O:\
    2012-03-19 06:10:44, Info [0x0a0023] UI progress task ProgressInfo\TransferFinalImage : StartProgress
    2012-03-19 06:10:45, Info [0x0606cc] IBS Calling WIMApplyImage (flags = 0x108)...
    2012-03-19
    06:10:45, Info IBS PopulateRootPathsOnBBCallBack:
    Detected root file/folder [bootmgr] in OS image.
    2012-03-19 06:10:45,
    Info IBS PopulateRootPathsOnBBCallBack: Detected
    root file/folder [BOOTNXT] in OS image.
    2012-03-19 06:10:45, Info
    IBS PopulateRootPathsOnBBCallBack: Detected root
    file/folder [Documents and Settings] in OS image.
    2012-03-19
    06:10:45, Info IBS PopulateRootPathsOnBBCallBack:
    Detected root file/folder [$Recycle.Bin\] in OS image.
    2012-03-19
    06:10:45, Info IBS PopulateRootPathsOnBBCallBack:
    Detected root file/folder [PerfLogs\] in OS image.
    2012-03-19
    06:10:45, Info IBS PopulateRootPathsOnBBCallBack:
    Detected root file/folder [Program Files\] in OS image.
    2012-03-19
    06:10:45, Info IBS PopulateRootPathsOnBBCallBack:
    Detected root file/folder [Program Files (x86)\] in OS image.
    2012-03-19
    06:10:45, Info IBS PopulateRootPathsOnBBCallBack:
    Detected root file/folder [ProgramData\] in OS image.
    2012-03-19 06:10:45, Info IBS PopulateRootPathsOnBBCallBack: Detected root file/folder [Users\] in OS image.
    2012-03-19
    06:10:45, Info IBS PopulateRootPathsOnBBCallBack:
    Detected root file/folder [Windows\] in OS image.
    2012-03-19
    06:10:45, Info IBS MoveOldOSFiles:File/folder
    [O:\bootmgr] doesn't exist; no need to move it before applying image.
    2012-03-19
    06:10:45, Info IBS MoveOldOSFiles:File/folder
    [O:\BOOTNXT] doesn't exist; no need to move it before applying image.
    2012-03-19
    06:10:45, Info IBS MoveOldOSFiles:File/folder
    [O:\Documents and Settings] doesn't exist; no need to move it before
    applying image.
    2012-03-19 06:10:45, Info [0x06412c] IBSLIB
    SetCheckpoint:
    Checkpoint("WinPEArchiveOldWindowsFoldersStartCheckpoint") in
    progress...
    2012-03-19 06:10:45, Info [0x06412e] IBSLIB
    SetCheckpoint: Checkpoint "WinPEArchiveOldWindowsFoldersStartCheckpoint"
    successfully set.
    2012-03-19 06:10:45, Info [0x0600a6] IBS
    MoveOldOSFiles:Successfully moved [O:\$Recycle.Bin\] to
    [O:\Windows.old\$Recycle.Bin\]
    2012-03-19 06:10:45, Info
    IBS MoveOldOSFiles:File/folder [O:\PerfLogs\] doesn't exist; no
    need to move it before applying image.
    2012-03-19 06:10:45, Info
    IBS MoveOldOSFiles:File/folder [O:\Program Files\]
    doesn't exist; no need to move it before applying image.
    2012-03-19
    06:10:45, Info IBS MoveOldOSFiles:File/folder
    [O:\Program Files (x86)\] doesn't exist; no need to move it before
    applying image.
    2012-03-19 06:10:45, Info IBS
    MoveOldOSFiles:File/folder [O:\ProgramData\] doesn't exist; no need to
    move it before applying image.
    2012-03-19 06:10:45, Info
    IBS MoveOldOSFiles:File/folder [O:\Users\] doesn't exist; no
    need to move it before applying image.
    2012-03-19 06:10:45, Info
    IBS MoveOldOSFiles:File/folder [O:\Windows\] doesn't
    exist; no need to move it before applying image.
    2012-03-19 06:10:45,
    Info [0x06412c] IBSLIB SetCheckpoint:
    Checkpoint("WinPEArchiveOldWindowsFoldersDoneCheckpoint") in progress...
    2012-03-19
    06:10:45, Info [0x06412e] IBSLIB SetCheckpoint: Checkpoint
    "WinPEArchiveOldWindowsFoldersDoneCheckpoint" successfully set.
    2012-03-19 06:10:45, Info [0x06412c] IBSLIB SetCheckpoint: Checkpoint("WinPEImageApplyReadyCheckpoint") in progress...
    2012-03-19 06:10:45, Info [0x06412e] IBSLIB SetCheckpoint: Checkpoint "WinPEImageApplyReadyCheckpoint" successfully set.
    2012-03-19 06:10:45, Info [0x06009e] IBS DeployWIMImage:Calling IDepWIMImageResolved::Apply...
    2012-03-19 06:10:46, Info [0x0606cc] IBS Calling WIMApplyImage (flags = 0x180)...
    2012-03-19
    06:15:43, Info [0x0600ae] IBS ApplyWIMCallback: Retrying on
    file
    [O:\Windows\WinSxS\amd64_mcx2.inf_31bf3856ad364e35_6.2.8250.0_none_4179f9bc60f8b120\Mcx2.inf]
    GLE is [1392]
    2012-03-19 06:15:43, Info [0x0600ae] IBS
    ApplyWIMCallback: Retrying on file
    [O:\Windows\WinSxS\amd64_mcx2.inf_31bf3856ad364e35_6.2.8250.0_none_4179f9bc60f8b120\Mcx2.inf]
    GLE is [1392]
    2012-03-19 06:15:44, Info [0x0600ae] IBS
    ApplyWIMCallback: Retrying on file
    [O:\Windows\WinSxS\amd64_mcx2.inf_31bf3856ad364e35_6.2.8250.0_none_4179f9bc60f8b120\Mcx2.inf]
    GLE is [1392]
    2012-03-19 06:15:44, Info [0x0600ae] IBS
    ApplyWIMCallback: Retrying on file
    [O:\Windows\WinSxS\amd64_mcx2.inf_31bf3856ad364e35_6.2.8250.0_none_4179f9bc60f8b120\Mcx2.inf]
    GLE is [1392]
    2012-03-19 06:15:45, Error [0x0600af] IBS
    ApplyWIMCallback: Error applying
    O:\Windows\WinSxS\amd64_mcx2.inf_31bf3856ad364e35_6.2.8250.0_none_4179f9bc60f8b120\Mcx2.inf.
    GLE [1392][gle=0x00000570]
    2012-03-19 06:15:45, Error [0x0606cc] IBS WIMApplyImage failed; hr = 0x80070570[gle=0x00000570]
    2012-03-19 06:15:45, Error [0x0600a1] IBS DeployImage:Image application failed; hr = 0x80070570[gle=0x00000570]
    2012-03-19
    06:15:45, Error [0x060082] IBS Callback_ImageTransfer:Failed to
    lay down the OS image; hr = 0x80070570[gle=0x00000570]
    2012-03-19
    06:15:45, Info IBSLIB PublishCriticalError: Publishing
    critical error message [Windows cannot install required files. The file
    may be corrupt or missing. Make sure all files required for installation
    are available, and restart the installation. Error code: 0x80070570]
    2012-03-19 06:15:45, Info [0x0a013d] UI Accepting Cancel. Exiting Page Progress.
    2012-03-19 06:15:45, Info UI Entering Page Cancel.
    2012-03-19 06:15:45, Info [0x0a0035] UI Allowing Page 'Drive Selection' to be shown
    2012-03-19 06:15:45, Info [0x0a0035] UI Allowing Page 'Drive Selection' to be shown
    2012-03-19 06:15:45, Info [0x0a011c] UI WizardDialogPost::SetActive
    2012-03-19
    06:18:35, Info IBS
    Callback_Rollback_ExecuteOnlineRollback: Executing
    [E:\Sources\rollback.exe /CleanInstallFromWinPE /noui
    /BTFolder:O:\$WINDOWS.~BT\Sources]...
    2012-03-19 06:19:29, Info IBS Callback_Rollback_ExecuteOnlineRollback: Rollback.exe exited with code 0x0
    2012-03-19
    06:19:29, Info [0x070042] DIAG CallBack_DiagnosticDataSend:
    Called with notification for Error published by ErrorHandler
    2012-03-19 06:19:29, Info [0x0a0023] UI progress task ProgressInfo\SendDiagnostics : StartProgress
    2012-03-19
    06:19:29, Info DIAG StartNetworking: Networking is
    NOT already initialized, so we will try to initialize it
    2012-03-19 06:19:29, Info DIAG StartNetworking: WpeSetComputerName Succeeded
    2012-03-19 06:19:37, Info DIAG StartNetworking: AutoProxy successfully initialized
    2012-03-19
    06:19:40, Info DIAG DiagnosticDataSendWorker:
    Phase=2 Start time was 0X30577CCF5, End time was 0X30577D17C, total time
    was 0X487
    2012-03-19 06:19:40, Info [0x070044] DIAG DiagnosticDataSendWorker: startSetupTimeInSecs = 0X305775C75
    2012-03-19 06:19:40, Info [0x070045] DIAG Processing Diagnostic data at 2012-03-19 06:19:40
    2012-03-19 06:19:40, Info [0x070046] DIAG DiagnosticDataSendWorker: endSetupTimeInSecs = 0X3057760FC
    2012-03-19 06:19:40, Info DIAG DiagnosticDataSendWorker: setupInstallTime = 0X487
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=2837, DataPointData=1
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=846, DataPointData=2
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=438, DataPointData=0
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=437, DataPointData=0
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=323, DataPointData=8
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=1297, DataPointData=14
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=342, DataPointData=2
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=6935, DataPointData=-1
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=765, DataPointData=1
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=9309, DataPointData=1
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=5809, DataPointData=1
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=2340, DataPointData=0
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=337, DataPointData=6
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=338, DataPointData=2
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=334, DataPointData=8250
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=1501, DataPointData=120217
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=1089, DataPointData=0
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=1088, DataPointData=9
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=578, DataPointData=-203802440
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=335, DataPointData=2033969996
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=1516, DataPointData=577600521
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=320, DataPointData=12573656
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=319, DataPointData=8
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=326, DataPointData=3201
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=318, DataPointData=198
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=324, DataPointData=9
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=327, DataPointData=64
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=2339, DataPointData=0
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=2189, DataPointData=1
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=842, DataPointData=105
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=331, DataPointData=1159
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=835, DataPointData=0
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=761, DataPointData=1159
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=719, DataPointData=0
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=720, DataPointData=0
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=721, DataPointData=0
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=722, DataPointData=0
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=723, DataPointData=0
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=724, DataPointData=0
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=725, DataPointData=0
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=726, DataPointData=0
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=727, DataPointData=0
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=728, DataPointData=0
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=579, DataPointData=2
    2012-03-19 06:19:40, Info DIAG SetDwordValuesFromBB: Setting DataPointID=306, DataPointData=1
    2012-03-19 06:19:40, Info [0x070019] DIAG SetDwordValuesFromBB: Exiting SetDwordValuesFromBB with return=0
    2012-03-19 06:19:40, Info DIAG SetStringValuesFromBB: Setting DataPointID=440, DataPointData=winmain_win8beta
    2012-03-19 06:19:40, Info DIAG SetStringValuesFromBB: Setting DataPointID=874, DataPointData=PRERELEASE
    2012-03-19 06:19:40, Info [0x07001a] DIAG SetStringValuesFromBB: Exiting SetStringValuesFromBB with return=0
    2012-03-19 06:19:40, Info [0x070019] DIAG SetDwordValuesFromBB: Exiting SetDwordValuesFromBB with return=0
    2012-03-19 06:19:40, Info [0x07001a] DIAG SetStringValuesFromBB: Exiting SetStringValuesFromBB with return=0
    2012-03-19 06:19:40, Info [0x07008e] DIAG SetStreamValuesFromBB: Exiting SetStreamValuesFromBB with return=0
    2012-03-19
    06:19:40, Info [0x070010] DIAG SetFromFile: Opened
    file=O:\$WINDOWS.~BT\Sources\Panther\diagerr.xml for reading SQM values
    2012-03-19
    06:19:40, Info [0x070069] DIAG SetFromFile: UMID 0x0600af in
    ApplyWIMCallback, line number 2393, occurred 1 times
    2012-03-19 06:19:40, Info [0x070069] DIAG SetFromFile: UMID 0x0606cc in LogCallback, line number 2262, occurred 1 times
    2012-03-19
    06:19:40, Info [0x070069] DIAG SetFromFile: UMID 0x0600a1 in
    DeployWIMImage, line number 1639, occurred 1 times
    2012-03-19
    06:19:40, Info [0x070069] DIAG SetFromFile: UMID 0x060082 in
    Callback_DeployImage, line number 537, occurred 1 times
    2012-03-19
    06:19:40, Info [0x070012] DIAG SetFromFile: Read 4 SQM Values
    from O:\$WINDOWS.~BT\Sources\Panther\diagerr.xml
    2012-03-19 06:19:40,
    Info [0x070010] DIAG SetFromFile: Opened
    file=O:\$WINDOWS.~BT\Sources\Panther\diagwrn.xml for reading SQM values
    2012-03-19 06:19:40, Info [0x070069] DIAG SetFromFile: UMID 0x0606cc in LogCallback, line number 2262, occurred 9 times
    2012-03-19
    06:19:40, Info [0x070069] DIAG SetFromFile: UMID 0x0a0000 in
    CallbackAppCompatProgress, line number 1254, occurred 1 times
    2012-03-19
    06:19:40, Info [0x070069] DIAG SetFromFile: UMID 0x070026 in
    CAccessWMI::LogErrorMessage, line number 94, occurred 2 times
    2012-03-19
    06:19:40, Info [0x070012] DIAG SetFromFile: Read 12 SQM Values
    from O:\$WINDOWS.~BT\Sources\Panther\diagwrn.xml
    2012-03-19 06:19:40,
    Info DIAG Successfully ended SQM session in
    O:\$WINDOWS.~BT\Sources\Panther\sqmSetup.sqm file, FileSize=1448 bytes
    2012-03-19
    06:19:40, Info DIAG Starting to upload SQM file =
    O:\$WINDOWS.~BT\Sources\Panther\sqmSetup.sqm to
    URL=http://sqm.microsoft.com/sqm/windows/sqmserver.dll
    2012-03-19 06:19:40, Info DIAG 1 SQM files sent for upload. Waiting for upload now
    2012-03-19 06:19:40, Info [0x070001] DIAG HRESULT=0x80070002
    2012-03-19 06:19:40, Info [0x070002] DIAG filePath=O:\$WINDOWS.~BT\Sources\Panther\sqmSetup.sqm
    2012-03-19 06:19:40, Info [0x070003] DIAG httpResponse=500
    2012-03-19
    06:19:40, Info [0x070005] DIAG SQM
    file=O:\$WINDOWS.~BT\Sources\Panther\sqmSetup.sqm COULD NOT be uploaded,
    Err=2, httpResponse=500
    2012-03-19 06:19:40, Info
    DIAG Sqm file successfully registered at
    HKLM\Software\Microsoft\SQMClient\Windows\Uploader\PendingUpload!O:\$WINDOWS.~BT\Sources\Panther\sqmSetup.sqm:0
    2012-03-19
    06:19:44, Info DIAG SQM File
    O:\$WINDOWS.~BT\Sources\Panther\sqmSetup.sqm - Wait for upload complete
    2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: ReportType = 1
    2012-03-19
    06:19:44, Info DIAG
    ObtainBucketingParamsFromLogFile: Opened
    diagerr.xml=O:\$WINDOWS.~BT\Sources\Panther\diagerr.xml for reading
    errors
    2012-03-19 06:19:44, Info DIAG ObtainBucketingParamsFromLogFile: Extracted UMIDStr=33947823
    2012-03-19 06:19:44, Info DIAG ObtainBucketingParamsFromLogFile: Found UMID[0]=600af
    2012-03-19 06:19:44, Info DIAG ObtainBucketingParamsFromLogFile: Extracted UMIDStr=33949388
    2012-03-19 06:19:44, Info DIAG ObtainBucketingParamsFromLogFile: Found UMID[1]=606cc
    2012-03-19 06:19:44, Info DIAG ObtainBucketingParamsFromLogFile: Extracted UMIDStr=42336417
    2012-03-19 06:19:44, Info DIAG ObtainBucketingParamsFromLogFile: Found UMID[2]=600a1
    2012-03-19 06:19:44, Info DIAG ObtainBucketingParamsFromLogFile: Extracted UMIDStr=33947778
    2012-03-19 06:19:44, Info DIAG ObtainBucketingParamsFromLogFile: Found UMID[3]=60082
    2012-03-19 06:19:44, Info DIAG ObtainBucketingParamsFromLogFile: Number of Errors in log = 4
    2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[0]=winmain_win8beta
    2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[1]=8250
    2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[2]=1
    2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[3]=1
    2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[4]=2
    2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[5]=9
    2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[6]=PRERELEASE
    2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[7]=X
    2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[8]=600af
    2012-03-19 06:19:44, Info DIAG CollectAndSendDiagDataToWatson: Bucketing Parameter[9]=60082
    2012-03-19
    06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
    Files To Add[0]=O:\$WINDOWS.~BT\Sources\Panther\setupact.log
    2012-03-19
    06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
    Files To Add[1]=O:\$WINDOWS.~BT\Sources\Panther\diagerr.xml
    2012-03-19
    06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
    Files To Add[2]=O:\$WINDOWS.~BT\Sources\Panther\cbs.log
    2012-03-19
    06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
    Files To Add[3]=O:\$WINDOWS.~BT\Sources\Panther\shellsetup.log
    2012-03-19
    06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
    Files To Add[4]=O:\$WINDOWS.~BT\Sources\Panther\setupmem.dmp
    2012-03-19
    06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
    Files To Add[5]=O:\$WINDOWS.~BT\Sources\Panther\..\inf\setupapi.app.log
    2012-03-19
    06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
    Files To Add[6]=O:\$WINDOWS.~BT\Sources\Panther\..\inf\setupapi.dev.log
    2012-03-19
    06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
    Files To
    Add[7]=O:\$WINDOWS.~BT\Sources\Panther\..\inf\setupapi.offline.log
    2012-03-19
    06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
    Files To Add[8]=O:\$WINDOWS.~BT\Sources\Panther\..\rollback\setupmem.dmp
    2012-03-19
    06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
    Files To
    Add[9]=O:\$WINDOWS.~BT\Sources\Panther\setupapi\setupapi.app.log
    2012-03-19
    06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
    Files To
    Add[10]=O:\$WINDOWS.~BT\Sources\Panther\setupapi\setupapi.dev.log
    2012-03-19
    06:19:44, Info DIAG CollectAndSendDiagDataToWatson:
    Files To
    Add[11]=O:\$WINDOWS.~BT\Sources\Panther\setupapi\setupapi.offline.log
    2012-03-19 06:19:44, Info DIAG Going to do Error Reporting for Event Name=WinSetupDiag01
    2012-03-19 06:19:44, Info DIAGER DiagERInitialize:Entry Also Initialized the log
    2012-03-19 06:19:44, Info DIAGER IDiagER::IDiagER:Entry
    2012-03-19 06:19:44, Info DIAGER CWfpER::Initialize:Entry
    2012-03-19 06:19:44, Info DIAGER CWfpER::Initialize:Entry
    2012-03-19 06:19:44, Info DIAGER Changing Report Type from Critical To Non Critical to support silent mode
    2012-03-19
    06:19:44, Info DIAGER Consent Value =
    HKCU\Software\Microsoft\Windows\Windows Error
    Reporting\Consent!WinSetupDiag01 has been set to 4
    2012-03-19 06:19:44, Info DIAGER DiagERAddBucketingParameters:Entry
    2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Entry
    2012-03-19 06:19:44, Info DIAGER IDiagER::AddBucketingParameters:Entry
    2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=winmain_win8beta
    2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=8250
    2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=1
    2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=1
    2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=2
    2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=9
    2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=PRERELEASE
    2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=X
    2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=600af
    2012-03-19 06:19:44, Info DIAGER CWfpER::AddBucketingParameters:Adding bucketing param=60082
    2012-03-19 06:19:44, Info DIAGER DiagERSetHeader:Entry
    2012-03-19 06:19:44, Info DIAGER CWfpER::SetHeader:Entry
    2012-03-19 06:19:44, Info DIAGER IDiagER::SetHeader:Entry
    2012-03-19
    06:19:44, Info DIAGER CWfpER::SetHeader:Setting
    header=Microsoft Windows Installation encountered a problem and needs to
    close. We are sorry for the inconvenience
    2012-03-19 06:19:44, Info DIAGER DiagERAddFiles:Entry
    2012-03-19 06:19:44, Info DIAGER CWfpER::AddFiles:Entry
    2012-03-19 06:19:44, Info DIAGER IDiagER::AddFiles:Entry
    2012-03-19 06:19:44, Info DIAGER CWfpER::AddFiles:Adding file=O:\$WINDOWS.~BT\Sources\Panther\setupact.log
    2012-03-19 06:19:44, Info DIAGER CWfpER::AddFiles:Adding file=O:\$WINDOWS.~BT\Sources\Panther\diagerr.xml
    2012-03-19 06:19:44, Info DIAGER CWfpER::AddFiles:Adding file=O:\$WINDOWS.~BT\Sources\Panther\cbs.log
    2012-03-19
    06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
    file=O:\$WINDOWS.~BT\Sources\Panther\cbs.log, Result=2
    2012-03-19 06:19:44, Info DIAGER CWfpER::AddFiles:Adding file=O:\$WINDOWS.~BT\Sources\Panther\shellsetup.log
    2012-03-19
    06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
    file=O:\$WINDOWS.~BT\Sources\Panther\shellsetup.log, Result=2
    2012-03-19 06:19:44, Info DIAGER CWfpER::AddFiles:Adding file=O:\$WINDOWS.~BT\Sources\Panther\setupmem.dmp
    2012-03-19
    06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
    file=O:\$WINDOWS.~BT\Sources\Panther\setupmem.dmp, Result=2
    2012-03-19
    06:19:44, Info DIAGER CWfpER::AddFiles:Adding
    file=O:\$WINDOWS.~BT\Sources\Panther\..\inf\setupapi.app.log
    2012-03-19
    06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
    file=O:\$WINDOWS.~BT\Sources\Panther\..\inf\setupapi.app.log, Result=2
    2012-03-19
    06:19:44, Info DIAGER CWfpER::AddFiles:Adding
    file=O:\$WINDOWS.~BT\Sources\Panther\..\inf\setupapi.dev.log
    2012-03-19
    06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
    file=O:\$WINDOWS.~BT\Sources\Panther\..\inf\setupapi.dev.log, Result=2
    2012-03-19
    06:19:44, Info DIAGER CWfpER::AddFiles:Adding
    file=O:\$WINDOWS.~BT\Sources\Panther\..\inf\setupapi.offline.log
    2012-03-19
    06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
    file=O:\$WINDOWS.~BT\Sources\Panther\..\inf\setupapi.offline.log,
    Result=2
    2012-03-19 06:19:44, Info DIAGER
    CWfpER::AddFiles:Adding
    file=O:\$WINDOWS.~BT\Sources\Panther\..\rollback\setupmem.dmp
    2012-03-19
    06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
    file=O:\$WINDOWS.~BT\Sources\Panther\..\rollback\setupmem.dmp, Result=2
    2012-03-19
    06:19:44, Info DIAGER CWfpER::AddFiles:Adding
    file=O:\$WINDOWS.~BT\Sources\Panther\setupapi\setupapi.app.log
    2012-03-19
    06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
    file=O:\$WINDOWS.~BT\Sources\Panther\setupapi\setupapi.app.log, Result=2
    2012-03-19
    06:19:44, Info DIAGER CWfpER::AddFiles:Adding
    file=O:\$WINDOWS.~BT\Sources\Panther\setupapi\setupapi.dev.log
    2012-03-19
    06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
    file=O:\$WINDOWS.~BT\Sources\Panther\setupapi\setupapi.dev.log, Result=2
    2012-03-19
    06:19:44, Info DIAGER CWfpER::AddFiles:Adding
    file=O:\$WINDOWS.~BT\Sources\Panther\setupapi\setupapi.offline.log
    2012-03-19
    06:19:44, Warning DIAGER CWfpER::AddFiles:Failed Adding
    file=O:\$WINDOWS.~BT\Sources\Panther\setupapi\setupapi.offline.log,
    Result=2
    2012-03-19 06:19:44, Warning DIAG DoWatsonReporting: Not able to add files to Diagnostics Error Reporting, Err=2
    2012-03-19 06:19:44, Info DIAGER DiagERSubmit:Entry
    2012-03-19 06:19:44, Info DIAGER CWfpER::Submit:Entry
    2012-03-19 06:19:46, Info DIAGER Watson Error Report submitted and Result=2
    2012-03-19 06:19:46, Info DIAGER DiagERTerminate:Entry
    2012-03-19 06:19:46, Info DIAGER CWfpER::~CWfpER:Entry
    2012-03-19
    06:19:46, Info DIAGER Consent Value =
    HKCU\Software\Microsoft\Windows\Windows Error
    Reporting\Consent!WinSetupDiag01 has been cleaned out
    2012-03-19 06:19:46, Info DIAGER IDiagER::~IDiagER:Entry
    2012-03-19 06:19:46, Info [0x0a0024] UI progress task ProgressInfo\SendDiagnostics : EndProgress
    2012-03-19 06:19:46, Info [0x090095] PANTHR WdsExitImmediate called! Execution will stop, and the queue won't be saved.
    2012-03-19 06:19:46, Info [0x0640d2] IBSLIB [Setup Disk Usage] ------ Drive O: ------
    2012-03-19 06:19:46, Info [0x0640d3] IBSLIB [Setup Disk Usage] Total bytes on drive: 715048.0 MB (749782167552 bytes)
    2012-03-19
    06:19:46, Info [0x0640d4] IBSLIB [Setup Disk Usage] Free bytes
    available to user: 714300.4 MB (748998279168 bytes)
    2012-03-19 06:19:46, Info [0x0640d6] IBSLIB [Setup Disk Usage] Found Setup folder/file [BT Folder ].
    2012-03-19 06:19:46, Info [0x09008c] PANTHR SeqExecute -- stopping, since WdsExitImmediate() was called
    2012-03-19 06:19:46, Info [0x090086] PANTHR pWorkerThreadFunc -- Stopping
    2012-03-19 06:19:46, Info [0x090086] PANTHR pWorkerThreadFunc -- Stopping
    2012-03-19 06:19:46, Info [0x090086] PANTHR pWorkerThreadFunc -- Stopping
    2012-03-19 06:19:46, Info PANTHR DeleteCriticalSection for pExecQueue->csLock;
    2012-03-19 06:19:46, Info CryptoSetup module terminated
    2012-03-19 06:19:46, Info [0x0605a6] IBS Requested UI to hide the language and locale selection pages.
    2012-03-19
    06:19:46, Info [0x06010d] IBS Module_Term_Productkey: Valid
    product key in blackboard, show property set to hide.
    2012-03-19 06:19:46, Info UI CallbackWin32UITerminate: Deleted WizardUI
    2012-03-19 06:19:46, Info [0x090081] PANTHR Destroying any unreferenced modules! (SEQ6)
    2012-03-19 06:19:46, Info [0x0601d7] IBS InstallWindows:Error Type = 3211266
    2012-03-19 06:19:46, Info [0x090009] PANTHR CBlackboard::Close: o:\$windows.~bt\sources\panther\setupinfo.


    Sunday, March 18, 2012 11:19 PM

All replies

  • Maybe the iso is corrupt. Try to re-download the iso, or copy from others. If it does not work, upgrade your BIOS. Also consider to check memories. You may un-plug memories and only leave one of them.

    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

    Thursday, March 22, 2012 5:46 AM
    Moderator
  • If you actually read the post, you would have seen that not only has the iso been obtained from multiple sources, its checksum has been validated.  The computer has its latest BIOS.  Since this computer is triple channel, it has to have three DIMMS plugged in - which it does (3x4GB).  Also, hundreds of other people are reporting the exact same problems with the CP install, with the exact same error! This is definitely a MS bug.

    Thursday, March 22, 2012 6:11 AM
  • I have exactly the same problem, and have done as you, and believe, that I've been selected to either troubleshoot till, the solution is found, and or not considered to be worthy, of testing Windows 8, so I give up.

    Saturday, April 21, 2012 12:07 AM
  • I can reproduce this problem too:

    Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation.
    Error code 0x80070570

    The error occurs during the second step of the installation process: “Getting files ready for installation (3%)”

    I am installing to a Solid State Disk (Crucial M4) which is connected to a JMicron JMB36X S-ATA II controller. The driver for this non-standard controller loads without problems when specified using the ‘Load driver’ option.

    Any help is appreciated.


    Regards, Joris Korbeeck

    Monday, June 04, 2012 7:58 AM
  • I got same problem but I founded error code on step 2 “Getting files ready for installation (82%)”

    Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation.
    Error code 0x80070570

    My PC CPU core 2 2.93 Ghz, Memory 2 Gb Hdd 80 Gb IDE..

    This spec can work fine on Win 7 Pro 32 bit

    Anybody can help me Please

    AnupapS..

    Friday, August 24, 2012 3:33 AM