locked
I am unable to install .net 3.5 on windows 8

    Question

  • many application require .net 3.5 to install on Windows 8 but it's no possible any idea ?
    Saturday, March 03, 2012 8:23 AM

Answers

  • Install it with DISM (run cmd.exe as admin), if the setup fails when you try to enable it under "add, remove features"

    dism.exe /online /enable-feature /featurename:NetFX3 /Source:d:\sources\sxs /LimitAccess

    Replace D: with your DVD drive/USB thumb drive or virtual ISO drive.

    "A programmer is just a tool which converts caffeine into code"

    Saturday, March 03, 2012 9:53 PM
  • If connected to internet, go to Programs and Features and select .NET Framework 3.5.  It will install the latest with all updates from Internet.  If no Internet or connection is slow and unreliable, use Andre Ziegler's technique.

     

    Sunday, March 04, 2012 7:03 PM

All replies

  • It's part of the "add or remove Windows feature" list. Just install it from there.
    • Proposed as answer by Per Salmi Saturday, March 03, 2012 5:26 PM
    Saturday, March 03, 2012 1:10 PM
  • Install it with DISM (run cmd.exe as admin), if the setup fails when you try to enable it under "add, remove features"

    dism.exe /online /enable-feature /featurename:NetFX3 /Source:d:\sources\sxs /LimitAccess

    Replace D: with your DVD drive/USB thumb drive or virtual ISO drive.

    "A programmer is just a tool which converts caffeine into code"

    Saturday, March 03, 2012 9:53 PM
  • If connected to internet, go to Programs and Features and select .NET Framework 3.5.  It will install the latest with all updates from Internet.  If no Internet or connection is slow and unreliable, use Andre Ziegler's technique.

     

    Sunday, March 04, 2012 7:03 PM
  • Thank for your reply.

    using "add remove features" I've got an error number 0x800F081F.

    using dism all was ok.

    Monday, March 05, 2012 10:05 AM
  • Thank for your reply.

    using dism all was ok.

    Nice to hear this :)

    "A programmer is just a tool which converts caffeine into code"

    Monday, March 05, 2012 9:25 PM
  • Roberto;

    If possible, I'd like to get some logs from you based on this problem.  Could you send me your C:\Windows\Windows Update.log, C:\Windows\Logs\DISM\DISM.log and C:\Windows\Logs\CBS folder.

    Thanks!


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Monday, March 05, 2012 10:41 PM
  • Excellent, thanks Roberto!

    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Tuesday, March 06, 2012 11:32 AM
  • Roberto;

    These logs appear to be from a Windows 7 machine, did these logs come from this CP install?


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Tuesday, March 06, 2012 7:07 PM
  • Sorry, yesterday I was on my windows 7 pc and ... without any thought I sent you wrong logs.

    These are the right.

    http://dl.dropbox.com/u/14844324/true_Windows8_logs.zip

    Wednesday, March 07, 2012 7:09 AM
  • No worries, thanks again for getting me the logs.

    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Wednesday, March 07, 2012 12:37 PM
  • Roberto,

    Thanks again for the logs, I have one question for you, geographically where are you located?  Dont feel obligated to answer if you dont want to.  Thanks!


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Wednesday, March 07, 2012 5:51 PM
  • I'm from Italy
    Thursday, March 08, 2012 9:25 AM
  • many application require .net 3.5 to install on Windows 8 but it's no possible any idea ?

    I have installed  Windows Server 8 Beta in my Lab, and I am facing the same issue here. Any idea?

    I do get an event in Setup logs:

    Event ID: 11; Source: Servicing

    Description: Update NetFx3 of Package Microsoft .NET Framework 3.0 failed to be turned on. Status: 0x800f0906.

    I also tried to give a source of the file to install, but it failed.

    Additional info: I have promoted this machine as a DC.


    APK


    • Edited by KarthickAP Monday, March 12, 2012 8:29 AM
    Monday, March 12, 2012 8:28 AM
  • The files are on media Karthick, use the following command to installed the Framework:

    dism.exe /online /enable-feature /featurename:NetFX3 /Source:d:\sources\sxs /LimitAccess

    I would like to see your C:\Windows\WindowsUpdate.log, C:\Windows\Logs\CBS\CBS.log and C:\Windows\Logs\DISM\DISM.log if possible though.


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Monday, March 12, 2012 10:36 AM
  • Thanks a lot joscon,

    You did it!!

    I was successfully able to install it. But why this has been into media? Does this mean that legacy stuffs are put in medai??

    Heres the link for the file you requested for...

    http://dl.dropbox.com/u/66658274/dism.log

    Regards,


    APK

    Monday, March 12, 2012 12:19 PM
  • No problem, glad that worked.  That version of the Framework is no longer included in builds so it needs to be installed either online or via the offline command I listed.  Can you do me one more favor and upload the other two logs for me (WU and CBS)?

    Thanks!


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Monday, March 12, 2012 12:24 PM
  • Hi,

    we installed Windows 8 CP on two laptops and we can't install the Dot Net Framework 3.5, too. The "trick" with DISM doesn't work for us. We are getting the error:

    Error: 0x800f081f

    The source files could not be found.
    Use the /source option to specify the location of the files that are required to
     restore the feature. The file location should be either the root directory of a
     mounted image or a component store that has the Windows Side-by-Side directory
    as an immediate subfolder.

    When we try to install it via the "Turn Windows function on or off" we ware getting the error code: 0x800f0906.
    I tried to download the full dotnet 3.5 installation package (the 231MB), but when I try to open it, it redirects me to Windows Update and there I get above error, too.

    I thought that maybe the ISO of the Windows 8 copy is corrupted, but we tried it with the Developer Preview ISO, a x86 Win 8 CP ger ISO and with the x64 Win 8 CP en ISO but nothing worked.

    Do you have a tip?

    Regards,

    Matthias

    Thursday, March 15, 2012 2:01 PM
  • Matthias,

    The DISM command isn't a trick, it's just the way we add features that are offline.  I would check the command and make sure it's properly pointing to the DVD drive with the ISO.  Also, if you're using copy&paste, makes sure that there weren't any extra spaces added to the command.


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Thursday, March 15, 2012 2:07 PM
  • Thanks for your fast answer.
    I typed it in many different ways, but nothing helpded. I tried to copy the sxs folder to c:\temp or c:\dotnet35 but it won't work.
    I tried to type it by myself and by copy&paste, but no success.. Everytime the same error...

    • Proposed as answer by Loooooser Thursday, December 06, 2012 8:24 PM
    Thursday, March 15, 2012 2:18 PM
  • What's the command you're using and what is the source?

    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Thursday, March 15, 2012 2:20 PM
  • the command is this one:

    E:\sources\sxs>DISM.exe /online /enable-feature /featurename:NetFX3 /Source:e:\sources\sxs /LimitAccess

    The source is the DVD from which I installed it. I tried to fire the command from c:\windows\system32 too, but same effect.

    Thursday, March 15, 2012 2:26 PM
  • Can you send me your C:\Windows\Logs\DISM\DISM.log?

    The error you're seeing is the same as if the files don't exist, which they do on media.  Are you using a DVD built from the CP ISO or from another source?


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Thursday, March 15, 2012 2:31 PM
  • I hope this link works, it's the first time that I share files via SkyDrive..

    https://skydrive.live.com/?cid=919030e71775583e#cid=919030E71775583E&id=919030E71775583E%21239

    Just how I said, the DVD in E:\ is the installation media from which I installed Win8 CP, but I tried it with the ISO file from the Develeoper Preview and with the ISO from a x86 version of Win8 CP, too (we have installed a x64 version). Nothing helped.

    Thursday, March 15, 2012 2:41 PM
  • Based on the log, your command is incorrect.  Use this (you can copy/paste):

    DISM.exe /online /enable-feature /featurename:NetFX3 /Source:e:\sources\sxs /LimitAccess



    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Thursday, March 15, 2012 2:45 PM
  • thanks, but.. same error. maybe in the log there was a command which I tried earlier.. There I made instead of a / a \

    So.. I think I will try the new reset function of windows 8, and then try again!

    But thanks for your really fast help!

    Thursday, March 15, 2012 2:50 PM
  • Ok, it's odd because the command in your DISM.log lacks any spacing, which would be why you'd see the error.  I personally haven't seen the DVD method of install fail when using the proper media so let me know the outcome of your issue when you've reset.

    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Thursday, March 15, 2012 3:10 PM
  • may be en error on the dvd try to mount the iso image (I did so)

    Thursday, March 15, 2012 3:42 PM
  • I had trouble installing this as well.   I believe the reason I had problems is that my machine is joined to a domain and our domain uses WSUS.  When I tried to add the .net it went looking on WSUS and couldn't find it so it failed.   Using the dism worked fine for me.

    WD

    Friday, March 16, 2012 11:56 PM
  • Hi Joscon, I have the same problem installing the .NET framework 3.5, I enter the command but windows says can not find. I checked the command for errors like spaces, but I didn't find any error. The log is here: https://dl-web.dropbox.com/get/dism1_log.txt?w=6f8437b7, I think, I don't know how share with dropbox.

    I hope you can help me,

    Luis.

    Sunday, March 18, 2012 5:46 AM
  • the link doesn't work.

    "A programmer is just a tool which converts caffeine into code"

    Sunday, March 18, 2012 11:39 AM
  • Hi,

    After an automatically prompted install of .net 3.5 failed during/after another software install, I tried to manually turn the feature on in the control panel which failed with error code 0x800f0922. Rebooting both normally and without non-MS startup items had no effect.

    Searching the web for windows 8 CP consumer .net 3.5 install 0x800f0922 error, suggested the problem was easily solved by simply doing an offline install from dvd or mounted image using the command "dism.exe /online /enable-feature /featurename:NetFX3 /Source:d:\sources\sxs /LimitAccess", alternatively after copying the source files to c:\net35 beforehand, or by downloading the entire installation package (dotnetfx35.exe) directly.

    Repeated failures and follow-up searches have made it clear that this solution only works for a majority of users, while a minority (including Mathias above and myself) still fail at 99.8 % every single time. However, these reports have largely been ignored as the above solution seems to work for most, while many of the remaining failures are actually 'false negatives' (where people fail to enter the command correctly etc).

    Thus I'm very glad to see you trying to get to the bottom of this joscon, and have shared my DISM logs at http://dl.dropbox.com/u/337718/dism.zip hoping this may help you figure it out. Please notify me if there are any other logs or specs you might need.

    BR
    Andreas
    Sunday, March 18, 2012 11:52 AM
  • Hi Andreas,

    Is this a Vm or a native PC?


    "A programmer is just a tool which converts caffeine into code"

    Sunday, March 18, 2012 12:14 PM
  • Windows 8 CP was installed on a system with no existing OS. That is, I booted from the DVD and erased the existing windows 7 partition + system reserved, before installing to unpartitioned space (i.e. created new partitions).
    • Edited by asoyland Sunday, March 18, 2012 3:27 PM
    Sunday, March 18, 2012 12:27 PM
  • @Luis, I wasn't able to get your logs

    @asoyland, thanks, I have your logs and we'll keep investigating these problems.


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Monday, March 19, 2012 2:14 PM
  • @asoyland; one more thing, I need your C:\Windows\Logs\CBS\CBS.log file as well.

    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Monday, March 19, 2012 2:17 PM
  • Monday, March 19, 2012 6:11 PM
  • Awesome, thanks!


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Monday, March 19, 2012 7:37 PM
  • asoyland, can I ask where you're located geographically?

    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Monday, March 19, 2012 7:56 PM
  • Located in Norway
    Tuesday, March 20, 2012 3:11 PM
  • Thanks.  By chance do you not have a temp directory specificed?

    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Tuesday, March 20, 2012 3:21 PM
  • Well spotted sir!

    I had in fact changed the temp folders in Environment Variables, as I've grown accustomed to locating these on a different disk than my system partition. Shortly after making this change in win8CP though, I realized that my reasons for doing this (which may have been misguided in the first place) might not be as valid any more, and decided to change them back to their default. However, while I knew the TEMP & TMP User variables to be %USERPROFILE%\AppData\Local\Temp , I couldn't quite recall what the System variables were originally, and simply set them to be the same as above.
     
    What could be the harm, after all?  Well, a lot it would seem, as after restoring these variables to their proper C:\Windows\temp (and restarting the pc) the dotnet install went smoothly :)

    Out of curiosity, might this have to do with permissions to access the users folder, or the installer not accounting for the possibility of the system temp dir being located elsewhere?

    In any case, thank you very much for pointing me in the right direction.

    Tuesday, March 20, 2012 5:54 PM
  • Glad to hear that you were able to get it installed.  We do a check for the directory before the operation kicks off so if one isn't there it will fail.  Permissions could also play a part in it, if you had ACL'd down the drive in such a way that the SYSTEM account couldn't write to it, that would also cause failure.


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Tuesday, March 20, 2012 6:06 PM
  • @joscon
    I Got The Same Problem With .Net Framework 3.5 Installation
    This is my dism log file
    https://www.dropbox.com/link/17.d2l2qZ6MfR?k=7817b9d7eee8dee209762ac23d5c6778&eh=473fe6e
    But I Couldn't Get CBS log File.. It Says "Access Denied" ( I Tried With 'Run As System Administrator' )
    Friday, April 20, 2012 7:17 PM
  • the link doesn't work.

    Copy the CBS.log to your desktop and zip both files into 1 zip file.


    "A programmer is just a tool which converts caffeine into code"

    Friday, April 20, 2012 9:10 PM
  • I've Included Both My dism.log file and CBS.log here

    http://dl.dropbox.com/u/2141344/log_file.zip

    Saturday, April 21, 2012 6:21 AM
  • You're missing some spaces in the commandline:

    dism.exe /online /enable-feature /featurename

    The must be a space before each "/".


    "A programmer is just a tool which converts caffeine into code"

    Sunday, April 22, 2012 2:24 PM
  • Thanks For Your Reply.

    The Mistake I Did Was.. I Just Gave The Source Wrong..
    Anyway Thanks For Your Support..

    Monday, April 23, 2012 11:40 AM
  • yes, C:\sources, but I thought you've copied the files to this folder. But this still don't explain why the command line has no spaces in the log. Wired.

    "A programmer is just a tool which converts caffeine into code"

    Tuesday, April 24, 2012 7:51 AM
  • Hello joscon!

     I Got The Same Problem With .Net Framework 3.5 Installation/Activation.

    I spent a few hours... I've tried all that was suggested here (another threads suggest the same). I even changed TEMP/TMP variables.

    Either I got error 0x800F0906 during on-line update from the Control Panel or I got 0x800f081f during "DISM.exe/online /enable-feature /featurename:NetFX3 /Source:c:\net35 /LimitAccess" at 65.8%.

    I used as F:\Sources\sxs as C:\net35.

    I'm using Windows 8 from xxx_LKG16 package (I hope you know what is "xxx").

    My  dism.log and CBS.log are here: http://files.mail.ru/PBRX9F   (for some reason DropBox doesn't want to install on my Windows 8 system also).

    I've cut them to show only the last try.

    For some reason that I don't understand I can't create files at C:\   but I can create subdirectories there. Maybe it is a reason because I see "physical location path: C:\ - CDISMManager::CreateImageSession" in dism.log.

    There are a lot warnings about "PEProvider.dll". And I really don't see it during launching in C:\Temp\EB1486D9-F31A-4BC2-9A68-F94D1300C1DC subdirectory.

    So your help will be much appreciated.

    Friday, June 01, 2012 12:06 PM
  • Hi,joscon!...

    Please Help me,i can't install it .net framework 3.5...

    I installing with windows feature,online,dism BUT not installing,please help me,

    giving this error everyway:

    error:0x800F0922

    Sunday, June 03, 2012 10:47 AM
  • Please upload the requested logs files so that we can see what went wrong.

    "A programmer is just a tool which converts caffeine into code"

    • Proposed as answer by DeSouffle Monday, June 04, 2012 9:02 AM
    Sunday, June 03, 2012 6:55 PM
  • Please upload the requested logs files so that we can see what went wrong.

    "A programmer is just a tool which converts caffeine into code"

       Aha thanks how to obtain my log files Andre.Ziegler ?

    Monday, June 04, 2012 9:03 AM
  •    Aha thanks how to obtain my log files?

    Please run the Windows Explorer and go to the folder "C:\Windows\Logs\CBS\" and copy all files from there to your document folder, also copy the setupapi.dev.log from the folder C:\Windows\Inf, the "C:\Windows\WindowsUpdate.log" and the file "C:\Windows\winsxs\poqexec.log" to your document folder (otherwise you can't upload it), zip all files into 1 ZIP and upload the zip to your SkyDrive [1] and post a link here.

    André

    [1] http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65


    "A programmer is just a tool which converts caffeine into code"

    Wednesday, June 06, 2012 8:22 AM
  • Hello Andre,

    I'm having the same problems installing .Net 3.5 on a Virtual Machine as described above.
    I get the 800F0922 when installing it.

    Here are my logfiles: http://sdrv.ms/MGNjpX

    I hope you can help me solving this problem.

    Wednesday, June 06, 2012 6:31 PM
  • You get an access denied error:

    2012-06-06 20:13:53, Error                 CSI    00000001@2012/6/6:18:13:53.054 (F) Logged @2012/6/6:18:13:53.054 : [ml:166{83},l:164{82}]"MOF (install online) $(runtime.windows)\Microsoft.NET\Framework\v2.0.50727\clr.mof"
    [gle=0x80004005]
    2012-06-06 20:13:53, Error                 CSI    00000002@2012/6/6:18:13:53.054 (F) CMIADAPTER: Inner Error Message from AI HRESULT = HRESULT_FROM_WIN32(ERROR_ACCESS_DENIED)
     [
    [19]"Access is denied.
    
    "
    ]
    [gle=0x80004005]
    2012-06-06 20:13:53, Error                 CSI    00000003@2012/6/6:18:13:53.054 (F) CMIADAPTER: AI failed. HRESULT = HRESULT_FROM_WIN32(ERROR_ACCESS_DENIED)
    	Element:
    	[117]"<mof xmlns="urn:schemas-microsoft-com:asm.v3" name="$(runtime.windows)\Microsoft.NET\Framework\v2.0.50727\clr.mof" />"
    [gle=0x80004005]
    2012-06-06 20:13:53, Error                 CSI    00000004@2012/6/6:18:13:53.054 (F) CMIADAPTER: Exiting with HRESULT code = HRESULT_FROM_WIN32(ERROR_ACCESS_DENIED).
    [gle=0x80004005]
    2012-06-06 20:13:53, Info                  CSI    0000006b Performing 1 operations; 1 are not lock/unlock and follow:
      (0)  LockComponentPath (10): flags: 0 comp: {l:16 b:901432211044cd01fa0100002817f009} pathid: {l:16 b:901432211044cd01fb0100002817f009} path: [l:226{113}]"\SystemRoot\WinSxS\x86_microsoft.windows.s..ation.badcomponents_31bf3856ad364e35_6.2.8400.0_none_c1bd28289b267706" pid: 1728 starttime: 129834799449138457 (0x01cd440feca66519)
    2012-06-06 20:13:53, Error      [0x018020] CSI    0000006c (F) Failed execution of queue item Installer: Mof ({9f4ec79f-3a97-4772-b635-2899468900a2}) with HRESULT HRESULT_FROM_WIN32(ERROR_ACCESS_DENIED).  Failure will not be ignored: A rollback will be initiated after all the operations in the installer queue are completed; installer is reliable (2)[gle=0x80004005]
    

    That's why setup fails. Have you run the cmd with admin rights? Do you run 3rd party security tools which protect the folder?


    "A programmer is just a tool which converts caffeine into code"

    Wednesday, June 06, 2012 7:44 PM
  • Thanks for you quick response, to answer your question: My cmd is running with admin rights.

    I came across that access denied error before, and tried some things out with permissions on the C:\Windows\Microsoft.NET folder.
    I took ownership of the Microsoft.NET folder and renamed it so i could start a fresh installation. Then i installed the .NET3.5 feature, but that didnt work out.

    I checked for 3rd party security tools, but there's none installed yet.
    There where some other 3rd party tools installed though, so i tried to uninstall them one by one.

    It turned out the "symantec workspace virtualization agent" was causing the problems with installing the .NET 3.5 feature.

    Thanks alot for your help!

    Thursday, June 07, 2012 12:13 AM
  • http://more.az/LOGS.zip    THIS IS MY LOG FILES PLEASE HELP ME MY FRIEND :( ...THANK YOU....


    Thursday, June 07, 2012 12:45 PM
  • You miss some logs. I need the CBS.logs and the DISM.log, too.


    "A programmer is just a tool which converts caffeine into code"

    Thursday, June 07, 2012 2:07 PM
  • Andre.Ziegler, This is some logs(dism.log,cbs.log) PLEASE: http://more.az/logs2.zip


    Thursday, June 07, 2012 8:20 PM
  • 2012-06-04 11:20:20, Info                  CSI    00000067 Warn: NtSetCachedSigningLevel failed with STATUS_INVALID_IMAGE_FORMAT on file [l:110{55}]"\??\C:\Windows\Microsoft.NET\Framework\sbs_VsaVb7rt.dll"
    2012-06-04 11:20:20, Error                 CSI    00000068@2012/6/4:18:20:20.874 (F) base\wcp\componentstore\com\store_transaction.cpp(1009): Error STATUS_INVALID_IMAGE_FORMAT originated in function ValidateQueuedOps expression: (null)
    [gle=0x80004005]
    2012-06-04 11:20:20, Info                  CBS    Added C:\Windows\Logs\CBS\CBS.log to WER report.

    You've used an unofficial MUI which seems to damaged Windows.

    Open a commadn prompt with admin rights again and run those 2 commands:

    DISM /Online /cleanup-image /CheckHealth
    DISM /Online /cleanup-image /RestoreHealth 

    those commands detect and restore broken files. Now reboot and try again to install .net 3.5

    "A programmer is just a tool which converts caffeine into code"

    Thursday, June 07, 2012 8:30 PM
  • THANKS THANKSSSSSSSSSSSSSSSSSSS VERY MUCH,YOU ARE INTELLIGENT PERSON,thank you very much,so so so thanks you ... :)

    this problem is solved :)


    Thursday, June 07, 2012 9:08 PM
  • I have a similar problem.

    I get the error 0x800F0922 when Turning windows features on/off and using 'DISM' in cmd.

    Log files.

    Any help would be greatly appreciated!

    Saturday, June 09, 2012 10:56 AM
  • Hi there,

    I seem to have a problem with this as well. 

    After running: 

    C:\WINDOWS\system32>dism.exe /online /enable-feature /featurename:NetFX3 /Source:G:\sources\sxs /LimitAccess

    (Where G is my virtual iso drive)

    I get:

    Deployment Image Servicing and Management tool
    Version: 6.2.8400.0

    Image Version: 6.2.8400.0

    Enabling feature(s)
    [===========================65.8%======                    ]

    Error: 0x800f081f

    The source files could not be found.
    Use the "Source" option to specify the location of the files that are required t
    o restore the feature. For more information on specifying a source location, see
     http://go.microsoft.com/fwlink/?LinkId=243077.

    The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

    My log files are here: https://www.dropbox.com/sh/7n8kp6l8tzlat4b/URHYMZJq0m

    Saturday, June 09, 2012 11:01 AM
  • Hi there,

    I seem to have a problem with this as well. 

    After running: 

    C:\WINDOWS\system32>dism.exe /online /enable-feature /featurename:NetFX3 /Source:G:\sources\sxs /LimitAccess

    (Where G is my virtual iso drive)


    2012-06-09 07:34:03, Info                  DISM   DISM Manager: PID=5244 TID=6044 Copying DISM from "C:\WINDOWS\System32\Dism" - CDISMManager::CreateImageSessionFromLocation
    2012-06-09 07:34:03, Error                 DISM   DISM Manager: PID=5244 TID=6044 Failed to copy the image provider store out of the image. - CDISMManager::CreateImageSessionFromLocation(hr:0x80070570)

    DISM can't copy the file from Windows\System32\Dism\.

    I see you also tried dism  /online /cleanup-image /restorehealth to repair Windows but this fails with the same issue. 

    Try to reset/Refresh Windows and run DISM again.


    "A programmer is just a tool which converts caffeine into code"


    Monday, June 11, 2012 8:23 AM
  • I have a similar problem.

    I get the error 0x800F0922 when Turning windows features on/off and using 'DISM' in cmd.

    Log files.

    Any help would be greatly appreciated!

    You have disk issues.

    2012-06-09 16:05:25, Error                 CSI    0000008c (F) c0000032 [Error,Facility=(system),Code=50 (0x0032)] #573759# from Windows::Rtl::SystemImplementation::CDirectory::CreateNewFile(...)[gle=0xd0000032]
    2012-06-09 16:05:25, Info                  CSI    0000008d Error c0000032 [Error,Facility=(system),Code=50 (0x0032)] while executing operation CreateFile on [l:180{90}]"\SystemRoot\WinSxS\FileMaps\program_files_x86_reference_assemblies_41115a5fd4566dab.cdf-ms"
    

    You get the error c0000032:

    //
    // MessageId: STATUS_DISK_CORRUPT_ERROR
    //
    // MessageText:
    //
    // {Corrupt Disk}
    // The file system structure on the disk is corrupt and unusable.
    // Please run the Chkdsk utility on the volume %hs.
    //
    #define STATUS_DISK_CORRUPT_ERROR        ((NTSTATUS)0xC0000032L)

    So run check disk util from Windows to repair the HDD issues. After you fixed the HDD issues, try to enable NetFx again.


    "A programmer is just a tool which converts caffeine into code"

    • Proposed as answer by Quadrac Tuesday, June 19, 2012 11:51 AM
    • Unproposed as answer by Quadrac Tuesday, June 19, 2012 11:51 AM
    Monday, June 11, 2012 8:28 AM
  • Hi,

    "Release Candidate Microsoft Windows Server 2012 Datacenter - Build 8400" on it I could with this command.

    Install-WindowsFeature NET-Framework-Core –Source D:\Sources\SxS

    http://technet.microsoft.com/en-us/library/hh831809.aspx#BKMK_FoD

    Windows PowerShell
    Copyright (C) 2012 Microsoft Corporation. All rights reserved.
    
    PS C:\Windows\system32> Install-WindowsFeature NET-Framework-Core –Source D:\Sources\SxS
    
    Success Restart Needed Exit Code      Feature Result
    ------- -------------- ---------      --------------
    True    No             Success        {.NET Framework 3.5 (includes .NET 2.0 and...

    Tuesday, June 19, 2012 11:51 AM
  • Hello,

    The Microsoft .NET Framework 3.5 Deployment Considerations whitepaper is now live on the web at:

    http://msdn.microsoft.com/library/windows/hardware/hh975396   

    This paper describes how Feature on Demand works to allow you to automatically acquire and enable the .NET Framework 3.5 for legacy applications.

    also the Blog post - Windows 8 and .Net Framework 3.5

    http://blogs.technet.com/b/askcore/archive/2012/05/14/windows-8-and-net-framework-3-5.aspx

    Thanks, Darrell Gorter [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights. VAMT - Volume Activation Management Tool - Download link http://www.microsoft.com/downloads/details.aspx?FamilyID=ec7156d2-2864-49ee-bfcb-777b898ad582&displaylang=en

    Thursday, June 21, 2012 7:55 PM
  • Hi,

    Unable to activate/install .Net 3.5 on W8 RP from "Turn Windows features on/off" and Command prompt. See my DSIM log here

    Can you advise, please?

    thanks

    András

    Sunday, June 24, 2012 2:24 AM
  • You have no used the Source parameter.

    "A programmer is just a tool which converts caffeine into code"

    Monday, June 25, 2012 9:28 AM
  • I have upgraded from CP to RP, so have no source drive. I'm trying to add .net 3.5 under 'Turn on Windows features'.


    Microsoft Magyarország

    Tuesday, June 26, 2012 8:30 PM
  • The error you're seeing in the DISM log is 0x800736b3 which is ERROR_SXS_ASSEMBLY_NOT_FOUND. That's not a common error code - it's reporting that the component store in %windir%\winsxs has become corrupt.

    We're very interested in such corruption - can you please run

           Dism /Online /Cleanup-Image /RestoreHealth

    in an elevated command console (i.e. run as admin). And then put the %windir%\logs\cbs\cbs.log file up on SkyDrive like you did the dism log?
    Tuesday, June 26, 2012 11:52 PM
  • Where do you see this? payloads for NetFx3 are removed from Image and he only used DISM  / Online /Enable-feature /FeatureName:NetFx3 /All without pointing to the source. Can you please release a complete list of errorcodes and how to fix them?

    "A programmer is just a tool which converts caffeine into code"

    Thursday, June 28, 2012 10:58 AM
  • Dism /Online /Cleanup-Image /RestoreHealth wrote back "Error 87 Cleanup-Image option is unkown."

    See the new DISM log here   +  CBS log here


    Thursday, June 28, 2012 5:17 PM
  • Toth;

    The command was misspelled per your log: dism  /Online /ClenaupImage /RestoreHealth


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Thursday, June 28, 2012 5:23 PM
  • Hi, I'm form Indonesia, I also got the same problem, failed to install netfx 3.5, DISM error: 14028 A component's file does not match the verification information present in the component manifest.
    This link logs file:
    https://www.dropbox.com/sh/kkehic81bhzkzke/JZoqnk7lI3

    this is very frustrating, because there is no way to succeed, I hope to find a solution here. thanks

    Saturday, June 30, 2012 6:11 PM
  •  /ClenaupImage also gives error message: "The cleanupimage option is unknown" Error 87

    New logs here http://sdrv.ms/LO3Fgj

    Sunday, July 01, 2012 7:58 AM
  • Hi Toth.,

    base on your log, this is what you have typed :

    1st: dism  /Online /Clenaup-Image /RestoreHealth

    2nd:dism  /Online /ClenaupImage /RestoreHealth

    3rd: dism  /Online /CleanupImage /RestoreHealth

    4th: dism  /CleaupImage

    5th: Dism  /Online /CleanupImage /RestoreHelath
    all you have typed are wrong, misspelled, look carefully at Andre.Ziegler was posted above

    dism /Online /Cleanup-Image /RestoreHealth
    • Proposed as answer by A'bana Idank Monday, July 02, 2012 4:09 AM
    Sunday, July 01, 2012 9:17 AM
  • Daeng - here's the failure being captured in your CBS.log file -

    2012-06-30 05:01:32, Info                  CSI    00000012 Hashes for file member \SystemRoot\WinSxS\Temp\InFlight\0b7c8c0fb856cd017c040000380acc09\74afa414b856cd0175050000380acc09_system.runtime.remoting.dll do not match actual file [ml:56{28},l:54{27}]"System.Runtime.Remoting.dll" :
      Found: {l:20 b:dnBK8O+0qLG8PCEsqT2nOBgHN4o=} Expected: {l:20 b:iVl+yHCtJf7YzozlWikROGaCYvg=}
      Found: {l:32 b:B1MXegKwxm08U+w81Vk0UoQuGY7EoY2d3+kD3LpIq1M=} Expected: {l:32 b:ddCbUlyskmqmOQikcS5KvDOTDz3eo78Z0PYRCXAJEWY=}
    2012-06-30 05:01:32, Error                 CSI    00000013@2012/6/30:12:01:32.423 (F) base\wcp\manifestparser\hashverify.cpp(557): Error STATUS_SXS_FILE_HASH_MISMATCH originated in function Windows::ManifestParser::Rtl::CmsVerifyFileHashes expression: (null)
    [gle=0x80004005]

    What this is saying is the System.Runtime.Remoting.dll file in your c:\netfx3 folder is corrupt (or was corrupted when it was copied from there to the temp working folder). There are a couple of reasons this could have happened - (1) your hard drive is starting to fail (2) you created the c:\netfx3 folder by copying it from a DVD (or USB) stick you burnt - DVD's in particular have a surprisingly high failure rate when they are burnt.

    Monday, July 02, 2012 5:34 PM
  • Andre - you don't need to provide a source when enabling netfx3. If a source isn't provided, we automatically contact Windows Update to get the required files (that's what the mystery /LimitAccess flag is about - it tells DISM not to fallback on Windows Update).

    Of course, not everyone has access to Windows Update (no internet, behind a firewall, system admin has configured the machine to use a local WSUS server, etc, etc) - and those folks will still need to provide a source.

    There's a start at documenting the error codes and how to fix them here - http://blogs.technet.com/b/askcore/archive/2012/05/14/windows-8-and-net-framework-3-5.aspx

    Monday, July 02, 2012 5:45 PM
  • Monday, July 02, 2012 6:38 PM
  • Many thanks Toth - we were able to find 6 corruptions and repair them all -

    =================================
    Checking System Update Readiness.

    (p) CSI Payload Corrupt (Fixed) amd64_bthleenum.inf_31bf3856ad364e35_6.2.8400.0_none_7108a00ae8d93b4d\BthLEEnum.sys
    (p) CSI Payload Corrupt (Fixed) amd64_microsoft-windows-setup-component_31bf3856ad364e35_6.2.8400.0_none_1776828f3da76f3f\setup_meiryoui_n.ttf
    (p) CSI Payload Corrupt (Fixed) x86_microsoft-windows-i..tional-codepage-857_31bf3856ad364e35_6.2.8400.0_none_58130604733a094c\C_857.NLS
    (p) CSI Payload Corrupt (Fixed) x86_mscorlib_b77a5c561934e089_4.0.8400.0_none_96768d3abce88129\mscorlib.dll
    (p) CSI Payload Corrupt (Fixed) amd64_microsoft-windows-naturallanguage6-0024_31bf3856ad364e35_6.2.8400.0_none_23103f2bf1e96e14\NlsLexicons0024.dll
    (p) CSI Payload Corrupt (Fixed) x86_microsoft-windows-security-vault-cpl_31bf3856ad364e35_6.2.8400.0_none_809e43cd1394e001\Vault.dll

    Summary:
    Operation: Detect and Repair
    Operation result: 0x0
    Last Successful Step: Entire operation completes.
    Total Detected Corruption: 6
     CBS Manifest Corruption: 0
     CBS Metadata Corruption: 0
     CSI Manifest Corruption: 0
     CSI Metadata Corruption: 0
     CSI Payload Corruption: 6
    Total Repaired Corruption: 6
     CBS Manifest Repaired: 0
     CSI Manifest Repaired: 0
     CSI Payload Repaired: 6
     CSI Store Metadata refreshed: True

    Total Operation Time: 2803 seconds.

    You should be able to enable .NET 3.5 now ...

    Monday, July 02, 2012 7:28 PM
  • thanks MichaelDay have analyzed my log file,

    my problem is resolved before you reply to my question, I've re-downloaded the iso installer and burn it and then reinstall it, the slow network is causing some files in the iso file a bit corrupt.

    But there are some questions that are still in my mind, Why we can not install the full package of this that included netfx 2.0 and 3.0? This is ridiculous and looks stupid, why Windows 8 requires netfx 2.0 and 3.0 while we will install netfx 2.0 and 3.0?. Lol

    Tuesday, July 03, 2012 2:32 AM
  • Michael,

    Still unable to add 3.5, see error screen here

    Thanks

    András


    Tuesday, July 03, 2012 4:52 PM
  • That's the same error code as before (0x800736b3), which means your system has become corrupted again. You can run the "Dism /Online /Cleanup-Image /RestoreHealth" command again to repair your system a second time, but I suspect you've got a failing hard drive :(
    Tuesday, July 03, 2012 8:16 PM
  • Toth,

    I think the root cause of your problem is because you installed your PC/laptop using Windows uprgade, You have to install your pc/laptop with fresh install not to upgrade, fresh install is better instead upgrade it, Windows upgrade make many problem, if you don't have source media like a DVD drive you can make it from USB stick, you can read here how to do it. hope this can help.

    Wednesday, July 04, 2012 2:19 AM
  • Andre - you don't need to provide a source when enabling netfx3. If a source isn't provided, we automatically contact Windows Update to get the required files

    but 99% of the users use DISM because the automatic download via "Turn on or off features" doesn't work. Windows 8 has serious issues to detect the network state (connected to the Internet or not).

    The link only shows 3 code and not the one the user gets here.


    "A programmer is just a tool which converts caffeine into code"

    Friday, July 06, 2012 8:21 AM
  • I am trying to install the .net3.5 with the dism.exe using the command, but i am still a little confused. I downloaded the .net 3.5 setup file onto an external drive (shown as E: drive) and tried running the command with "E:" as the source and the name of the file "dotNetFX35setup" as the featurename. But it returned error 87. I'm not sure why I would use "NetFX3" as the featurename when there is no such file on the disk with that name. Can someone please provide some explanation on the dism.exe command??

    Tuesday, August 07, 2012 10:26 PM
  • Hi Lebbz, for a complete understanding you can try this link:

    http://technet.microsoft.com/en-us/library/hh824822.aspx#BKMK_enable

    Did using NetFX3 work? ie: dism.exe /online /enable-feature /featurename:NetFX3

    Wednesday, August 08, 2012 11:23 AM
  • I may have missed something but I had a very hard time getting the .Net Framework 3.5 to install on Windows 8 RTM.
    In a situation where an administrator uses WSUS in a domain, the above will not work on Windows 8 RTM.  Windows attempts to download the files from Windows Update but WSUS is Windows Update in this situation so it fails.  Most folks do not use Server 2012 for WSUS so there is no way to configure the alternate path that I am aware of.  So Installing via features is a fail.
    I tried downloading the full package of .Net Framework 3.5 form MS and when I tried to install, Windows 8 launched the same window telling me it would try to download the files form Windows update, even though I had downloaded the package and the files were local.  So we cannot even install a package without this nice feature of Win 8 getting involved. 

    DISM is the only successful way to do this in a production network that is run on Server 2008 R2.


    James

    Friday, August 24, 2012 11:19 PM
  • You can set the policy to bypass the WSUS server using policy.


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Monday, August 27, 2012 2:32 PM
  • dont know what dism.exe /online /enable-feature /featurename:NetFX3 /Source:d:\sources\sxs /LimitAccess. but thanks it worked :D
    Saturday, September 15, 2012 12:18 PM
  • Hello.

    Does anyone know how to integrate .net3 install on Windows 8 in offline mode for unattended installs?

    Please don't confuse "Offline" with Internet. I am talking about DISM offline commands (if they exist) for this particular problem.

    Thanks.

    Friday, September 28, 2012 4:23 PM
  • I am running Release Preview Windows 8.  I am getting same issues here "Access Denied".  I have tried local and domain users that are administrators of the machine.  I have also opened command prompt as administrator and still get "Access Denied".

    Here are my logs:  http://dl.dropbox.com/u/36988399/logs.zip


    Also when i try to install a windows component such as the Windows Identity Foundation 3.5 or .NET 3.5 I get the following "Error code: 0x80070543".
    • Edited by Xavior01 Tuesday, October 09, 2012 3:14 PM
    Tuesday, October 09, 2012 3:07 PM
  • Xavior;


    Do you have access to RTM?  Most of these issues were resolved at release.


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Tuesday, October 09, 2012 9:48 PM
  • I have technet license, didn't know there was RTM out!!  I will look but technet sent me to the preview for some reason.  maybe i clicked on the wrong thing..
    Wednesday, October 10, 2012 4:17 PM
  • Ok you were right, I found the RTM version.  I wonder if I can upgrade or if I should just reload from scratch... 

    Thanks for the help!

    Wednesday, October 10, 2012 4:28 PM
  • You'll need to reinstall


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Wednesday, October 10, 2012 4:41 PM
  • Hello.

    Does anyone know how to integrate .net3 install on Windows 8 in offline mode for unattended installs?

    Please don't confuse "Offline" with Internet. I am talking about DISM offline commands (if they exist) for this particular problem.

    Thanks.

    The command is:
    dism.exe /Image:C:\mount /enable-feature /featurename:NetFX3 /Source:d:\sources\sxs /LimitAccess

    Wednesday, October 10, 2012 5:40 PM
  • C:\Windows\system32>DISM /Online /cleanup-image /RestoreHealth

    Deployment Image Servicing and Management tool
    Version: 6.2.9200.16384

    Image Version: 6.2.9200.16384

    [==========================100.0%==========================]
    The restore operation completed successfully. The component store corruption was
     repaired.
    The operation completed successfully.

    C:\Windows\system32>

    Then I was able to install from Control Panel > Windows Features normally. Many thanks! (I'm running build 9200)

    • Proposed as answer by Tatosgr Wednesday, October 31, 2012 3:13 AM
    Saturday, October 13, 2012 10:13 AM
  • hello there... i'm in trouble now..
    asking for help..
    using windows 8 pro [Image Version: 6.2.9200.16384]

    trying to install netframework 3.5 coz i'm trying to install zune on my laptop..
    but it failed to download online..also try the dism method also failed

    Sunday, October 21, 2012 6:53 AM
  • What is the error code you're getting?  Can you share out your \Windows\Logs\DISM\DISM.log


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Sunday, October 21, 2012 2:46 PM
  • I was trying to install this for Windows 8 Enterprise 64 bit and 32 bit but

    dism.exe /online /enable-feature /featurename:NetFX3 /Source:d:\sources\sxs /LimitAccess

    it didn't work. It gave an error saying source files are missing. None of the workarounds here worked except for the one which instructs to repair the windows image.

    Win 8 64bit

    • Ran dism /online /cleanup-image /checkhealth first but it didn't report any corruptions.
    • Ran dism /online /cleanup-image /restorehealth
    • Installed .net from Control Panel -> Programs and Features and selected to install from Windows Update.
    • Worked!

    Win 8 32bit

    • Ran dism /online /cleanup-image /checkhealth first but it didn't report any corruptions.
    • Ran dism /online /cleanup-image /restorehealth
    • Installed .net from Control Panel -> Programs and Features and selected to install from Windows Update.
    • Didn't work!
    • Restarted the VM.
    • Ran dism /online /cleanup-image /restorehealth again.
    • Installed .net from Control Panel -> Programs and Features and selected to install from Windows Update.
    • Worked!

    I also modified the value of UseWUServer key in HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU to 0 since we use WSUS in our environment and assuming it might cause any complexities. Not sure whether this helped some how or not. Keep me updated if any of you find this is not needed. I was kinda in a hurry ;)

    Thanks for the helpful instructions and guidelines. Hope this will be fixed in coming updates.


    C|EH, CCNA, MCSA, MCITP, 5xMCTS, MCP


    • Edited by NimanthaW Wednesday, October 24, 2012 6:14 AM wrong signature
    Wednesday, October 24, 2012 6:13 AM
  • But, how I can get that files?
    Saturday, October 27, 2012 7:42 PM
  • @dara;

    Which files are you referring to?  The .Net files are in your install.wim on media so for the syntax above to work you'll need to make sure that you properly designate the drive letter in the command.  If you're referring to something else, please let me know.


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Monday, October 29, 2012 2:29 PM
  • Same problem with Windows 8 and .NET 3.5 here.

    Located in Norway.

    Log files: https://dl.dropbox.com/u/2708963/dotnet35/dotnet35failinstall.zip

    Tuesday, October 30, 2012 10:20 AM
  • C:\Windows\system32>DISM /Online /cleanup-image /RestoreHealth

    Deployment Image Servicing and Management tool
    Version: 6.2.9200.16384

    Image Version: 6.2.9200.16384

    [==========================100.0%==========================]
    The restore operation completed successfully. The component store corruption was
     repaired.
    The operation completed successfully.

    C:\Windows\system32>

    Then I was able to install from Control Panel > Windows Features normally. Many thanks! (I'm running build 9200)

    This thing here worked 100%.
    Wednesday, October 31, 2012 3:12 AM
  • I also have a problem installing the .NET Framework. The install always fail at 99.8% via DISM and gives me the error code 0x800f0922

    Anyway, here are my Logs (DISM, CBS and Windows Update) : https://docs.google.com/open?id=0B1G_00YYVrlYaHR5bVR3c1VIbl If you can help me.
    Monday, November 05, 2012 3:51 PM
  • @french

    What steps have you tried to this point?


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Monday, November 05, 2012 4:27 PM
  • Well I tried to change the Environment Variables like asoyland, I tried to execute "DISM /Online /cleanup-image /RestoreHealth" but it froze at 20% and I even tried to Refresh my Windows 8 but I get the same result every time.
    Monday, November 05, 2012 4:31 PM
  • hi Mr : Joscn Microsoft

    hello there... i'm in trouble now..

    trying to install netframework 3.5 coz i'm trying to install zune on my laptop..
    but it failed to download online..also try the dism method also failed

    using "add remove features" I've got an error number 0x800F081F.

    using dism all was ok.

    using windows 8 pro [Image Version: 6.2.9200.16384]

    this file is "CBS" & "Dism" from Windows\Logs\DISM\DISM.log & Windows\Logs\CBS\CBS.log

     http://persiandrive.com/265785

    Tuesday, November 06, 2012 12:23 AM
  • I tried the dism method to install .net 3.5 but it gives me error 87. it says "The online/enable-feature/featurename option is unknown"
    Tuesday, November 06, 2012 8:39 AM
  • I tried the dism method to install .net 3.5 but it gives me error 87. it says "The online/enable-feature/featurename option is unknown"

    you must have a space before the "/".

    Copy and past the command to the command pompt


    "A programmer is just a tool which converts caffeine into code"

    Tuesday, November 06, 2012 2:02 PM
  • Hey guys I am having this issue and i am having no luck via the control panel or cmd to get .net 3.5 installed

    here are all my logs. Hopefully I can get this issue sorted out missing out on Fifa 13!!

    https://dl-web.dropbox.com/get/Logs/CBS.log?w=24a93273

    https://dl-web.dropbox.com/get/Logs/CbsPersist_20121107084803.log?w=24bfb99f

    https://dl-web.dropbox.com/get/Logs/dism.log?w=af02ee20

    https://dl-web.dropbox.com/get/Logs/WindowsUpdate.log?w=bfaea0ed

    If there is anything else you need please let me know

    Wednesday, November 07, 2012 11:54 AM
  • Hey guys i am also having this issue....first i tried windows update method but it didn't worked....then i also tried dism method but it didn't worked too.

    i also ran the restore health command and it completed successfully but after that also it is giving the following error ....

    Deployment Image Servicing and Management tool
    Version: 6.2.9200.16384

    Image Version: 6.2.9200.16384

    Enabling feature(s)
    [===========================65.8%======                    ]

    Error: 0x800f081f

    The source files could not be found.
    Use the "Source" option to specify the location of the files that are required
    o restore the feature. For more information on specifying a source location, se
     http://go.microsoft.com/fwlink/?LinkId=243077.

    The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

    my logs can be find at http://dl.dropbox.com/u/83647679/logs.rar

    plzz help me soon...


    • Edited by Anas Arif Saturday, November 10, 2012 9:14 PM
    Saturday, November 10, 2012 9:11 PM
  • have you used the Source parameter?

    "A programmer is just a tool which converts caffeine into code"

    Sunday, November 11, 2012 3:47 PM
  • i am using this command  
    DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:G:\sources\sxs

    where G: is my mounted iso image...

    Sunday, November 11, 2012 6:40 PM
  • i am using this command  
    DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:G:\sources\sxs

    where G: is my mounted iso image...


    change the order of the parameter. Add /LimitAccess to the end, like I've posted it.

    "A programmer is just a tool which converts caffeine into code"

    Sunday, November 11, 2012 7:34 PM
  • tried but same result...

    also when i tried from another image file of win 8 pro it had given the following error..

    C:\Windows\system32>DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /Sourc
    e:G:\sources\sxs /LimitAccess

    Deployment Image Servicing and Management tool
    Version: 6.2.9200.16384

    Image Version: 6.2.9200.16384

    Enabling feature(s)
    [===========================65.8%======                    ]

    Error: 14028

    A component's file does not match the verification information present in the co
    mponent manifest.

    The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

    Sunday, November 11, 2012 7:53 PM
  • Looks like you have damaged files:

    //
    // MessageId: ERROR_SXS_FILE_HASH_MISMATCH
    //
    // MessageText:
    //
    // A component's file does not match the verification information present in the component manifest.
    //
    #define ERROR_SXS_FILE_HASH_MISMATCH     14028L

    So run DISM with with scan- and RestoreHealth, if all files are ok, check the hash of your ISO. Maybe the ISO is damaged.


    "A programmer is just a tool which converts caffeine into code"

    Sunday, November 11, 2012 8:01 PM
  • i have already run restore and it completed successfully but still same situation

    how to check hash of the iso????

    still what about with first iso that is giving source error??

    Sunday, November 11, 2012 8:08 PM
  • You get the source error because of the wrong command order.

    Where have you downloaded Windows 8 (from Technet/MSDN or with the Upgrade Installer)?

    You can calculate the hash with several tools like this:

    http://code.kliu.org/hashcheck/


    "A programmer is just a tool which converts caffeine into code"

    Sunday, November 11, 2012 8:20 PM
  • wrong command order??

    i have tried all the mentioned orders bt neither works :(

    i checked the hash of the iso and it was matched.
    • Edited by Anas Arif Sunday, November 11, 2012 8:51 PM
    Sunday, November 11, 2012 8:26 PM
  • upload the DISM.log and the CBS log folder.

    "A programmer is just a tool which converts caffeine into code"

    Sunday, November 11, 2012 9:03 PM
  • i had already provided the link fr my logs in the first post...

    btw you can find my logs at http://dl.dropbox.com/u/83647679/logs.rar

    Sunday, November 11, 2012 9:10 PM
  • How do I upload the folders? I am having same issues, I have windows 8, and can't download the framework, can you please look at my logs and see if you can see the issue

    Sunday, November 18, 2012 2:07 AM
  • i had already provided the link fr my logs in the first post...

    btw you can find my logs at http://dl.dropbox.com/u/83647679/logs.rar

    2012-11-11 01:17:06, Info                  CBS    Session: 30261108_1791589686 finalized. Download error: 0x80240022 [Unknown Error], Reboot required: no [HRESULT = 0x800f0906 - CBS_E_DOWNLOAD_FAILURE]

    Again, use the correct command and add /LimitSource to the end. This is the error.


    "A programmer is just a tool which converts caffeine into code"

    Sunday, November 18, 2012 4:35 PM
  • How do I upload the folders? I am having same issues, I have windows 8, and can't download the framework, can you please look at my logs and see if you can see the issue


    copy both folders to the desktop and compress them to a zip. Now upload this zip to your dropbox or Skydrive account and post a link here.

    "A programmer is just a tool which converts caffeine into code"

    Sunday, November 18, 2012 4:36 PM
  • Don't have Windows ISO... what can I do?
    Tuesday, November 20, 2012 9:41 AM
  • Don't have Windows ISO... what can I do?

    Download the ISO with your key:

    http://www.intowindows.com/download-windows-8-iso-from-microsoft-using-product-key/

    or use the Enterprise Eval ISO which also contains the required files.


    "A programmer is just a tool which converts caffeine into code"

    Tuesday, November 20, 2012 3:37 PM
  • hello i have windows 8 pro 64bit everytime i use dism to install it stops at 65.8% and gives this error

    0x800f081f

    The source files could not be found.

    Wednesday, November 21, 2012 11:40 PM
  • hello i have windows 8 pro 64bit everytime i use dism to install it stops at 65.8% and gives this error

    0x800f081f

    The source files could not be found.


    have you used the /Source and /LimitAcccess flags?

    "A programmer is just a tool which converts caffeine into code"

    Thursday, November 22, 2012 6:07 AM
  • Joseph, first off thank you so much for your continued follow up on the dotnet and windows 8 issue. I have been banging my head against the wall for months now and I can NOT figure out what the scoop is. I’m the one man IT shop here at my company and evaluating Win 8 to see if we want to roll it out on our desktops.  Up until  this point, I am very “pro win8”. It’s a bold move, something big corporations like Microsoft rarely make. I say that, just so you’ll know my loyalties lol.

    My system:

    Dell xps425 6GB Ram

    Windows 8 Enterprise Eval (64bit)  (build 9200) w/ 31 days left on eval.                

    Running on a domain network using Microsoft business essentials (exchange, etc)

    WUS did come with essentials but I have never configured it.

    This issue began when I tried to install SyncToy. It needed the older version of dotnet. So I try the only way I knew how at the time by “turning windows features on/off. It says I need to download from windows update. It times out with this error: “…. Couldn’t connect to the internet to download necessary files….  Error code: 0x800F0906.

    I do some searchs and find a million suggestions going the DISM route.  And for whatever reason I CANNOT get it to work.  Ive scoured the command line as im typing it, had people double check me etc. I just cant  get it to work using the command prompt running as administrator.  This is the command I type:

    DISM.exe /online /enable-feature /featurename:NetFX3 /Source:e:\sources\sxs /LimitAccess

    Just to verify, there should be a space after DISM.exe, and a space after every command variable that starts with / right?  Anyway, hopefully you can see something in the logs (all the ones you request are here:

    https://skydrive.live.com/redir?resid=F9795F259128B542!879&authkey=!AJ9N6gQt4CpTqNg

    and put me out of my misery. There is also a screenshot to show that e: is the source and the dvd is there are ready.  At this point Id give almost anything but my firstborn to get this fixed!!   I sincerely appreciate any help you or your colleagues can offer. Thanks for your time.

    Jim

    Wednesday, November 28, 2012 9:46 PM
  • I encountered the same trouble here my CBS and DISM files:

    https://skydrive.live.com/#cid=B8141B7D91E319B8&id=B8141B7D91E319B8%21109

    http://www.mediafire.com/?1c66lorug6t40p7

    Thursday, November 29, 2012 5:00 AM
  • I encountered the same trouble here my CBS and DISM files:

    https://skydrive.live.com/#cid=B8141B7D91E319B8&id=B8141B7D91E319B8%21109

    http://www.mediafire.com/?1c66lorug6t40p7

    we need all logs from CBS folder. Windows stores older logs in CAB files. We need those, too.

    "A programmer is just a tool which converts caffeine into code"

    Thursday, November 29, 2012 9:00 AM
  • http://www.mediafire.com/download.php?y8d4x93g8vxvgs3 --> that's my CBS folder
    Thursday, November 29, 2012 12:56 PM
  • Jim;

    In looking over your logs, you're adding a space to your commands that doesnt need to be there.  For example, you initially tried this:

    dism /online/enable-feature/featurename:NetFx3/all/source:h:\sources\sxs

    Here, you're missing a space between feature and /featurename so thats why those commands were failing.  Afterwards, you're adding spaces either prefixed or trailing that dont need to be in the command.  The command you have above should work properly, so there are a couple of things that come to mind here.

    1. You're hitting the issue I describe in my blog here: http://blogs.technet.com/b/joscon/archive/2012/11/14/how-to-update-local-source-media-to-add-roles-and-features.aspx where your source pre-dates the files we're looking for and you cant add them.  You can mount your WIM, update the WIM with the packages you need and then attempt to re-add the files.

    2. Your store is corrupt in some fashion, run the DISM /Online /Cleanup-Image /RestoreHealth command on the server with an Internet connection to see if we fix some of the files (NOTE: If you have problem #1 this will fail)

    3.  Your source is bad or corrupted.  Unlikely, but it happens.

    Anyways, try those out and let me know.  Sadly, I only take firstborns as payment ;)


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Thursday, November 29, 2012 3:30 PM
  • dhila7;

    See the advice I just posted above for Jim, this might apply to you as well. I see the operations failing for the source in your CBS logs but we're simply throwing a SOURCE_MISSING parameter which is exactly what it says it is, you dont have the file we're looking for.  Try the steps above and let me know.


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Thursday, November 29, 2012 3:36 PM
  • joseph, thank you so much for the quick response. I will try your suggestions and report the results as soon as i get the morning fires put out here.  I talked with my son and he's not too keen on moving, maybe we can set up some sort of payment plan lol....
    Thursday, November 29, 2012 4:43 PM
  • the results for your suggestion #2:

    "Deployment Image Servicing and Management tool
    Version: 6.2.9200.16384

    Image Version: 6.2.9200.16384

    [==========================100.0%==========================]
    The restore operation completed successfully. The component store corruption was
     repaired.
    The operation completed successfully."

    You stated that this would fail if I have the #1 issue from your suggestions.  Since this completed does it mean I shouldn't try #1.  If not, do I try the DISM command line now to see if it works since the corruption was fixed? The message says component store corruption was repaired, does that mean it actually found corruption specifically or is that the generic message it sends when the restore attempt is complete? Thanks again for your help!

    Thursday, November 29, 2012 5:02 PM
  • Jim;

    Yes, that means we had some sort of corruption in the component store and resolved it by pulling down files from WU (you can see the results of what was done in the CBS.log).  I would try the DISM command again, or attempt to install it over WU, whichever works best for you.


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Thursday, November 29, 2012 5:41 PM
  • I'll try to understand your first suggestion but I'm not a hi-tech person so I didn't know whether I'll do it right or not,

    the " DISM /Online /Cleanup-Image /RestoreHealth" command didn't work, it's only progressed up to 20%, I've tried it before, since you suggested to try it on internet connection I also try it but nothing worked.

    it is gonna work if I refresh the OS???

    Friday, November 30, 2012 1:12 AM
  • The DISM command should work without an issue.  What happens after 20%?  Does it fail?  Whats the error?

    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Friday, November 30, 2012 1:40 AM
  • We have a winner. And its the underdog rarely seen "corrupt source" causing the months of grief lol.  

    So, I tried the DISM command again with familiar results.  So I decided to redownload the Windows 8 Enterprise eval again. While it was downloading, ran the repair command again and it found and fixed corruption again (2nd time if you recall).  Rebooted. Mounted the newly downloaded ISO. Ran the DISM command again not expecting anything different, but alas, it did what it was supposed to do.  When this fails, is there anyway to differentiate the error code, where it would be easier to know where to start looking. It seems like it would be able to determine its corrupt and say so in  an error.  But technically I guess the error it throws "can't find source" is generic-ly true if its corrupt, it can't see it.  It sure would save a lot of headaches if the error message could be a bit more specific.  Anyway thank you so much for your help, I appreciate it.  I hope the karma train stops at your station with a full load for you.....

    Friday, November 30, 2012 5:46 AM
  • Glad that worked out for you Jim.  Unfortunately, there isnt a way to have anything more specific than what we have because, as you correctly stated, its just a missing source file.  I'll work on some content for this and post it on my blog to make it a little more visible.

    Thanks for letting me know that worked and have a good weekend.


    --Joseph [MSFT] http://blogs.technet.com/b/joscon/

    Friday, November 30, 2012 3:20 PM
  • I recently upgraded to windows 8 pro from windows 7 and have been facing similar problems installing .net 3.5 .. i bought it online and do not have the windows DVD.. i keep on getting the 0x800F0906 error, even though i am connected to the internet and other windows updates are working fine.. how do i resolve the issue? thanks.. Saorabh

    Sunday, December 09, 2012 6:12 PM
  • @Saorabh

    download the Win8 Enterprise Trial for your CPU Architecture (32 or 64Bit), mount the ISO and use the DISM command with the Source parameter.


    "A programmer is just a tool which converts caffeine into code"

    Monday, December 10, 2012 6:11 AM
  • @ Andre.. Thanks.. i am downloading the iso now (it tells me that it'll take one day to download at the current speed!).. will let you know once it's downloaded.. 
    Monday, December 10, 2012 6:31 PM
  • Hello there,

    I also have problems installing runtime 3.5 on my W8 pc.

    I have tried all of the above methods to try and get it installed, but now it just comes with the error message:

    0x800f081f

    It's the same, whether i use the iso file i downloaded to install Windows, or the Enterprise version mentioned in one of the above answers.

    All the logs file are here http://dl.dropbox.com/u/12087045/logs.rar

    Hope that you guys can solve my problems

    Mike

    Tuesday, December 11, 2012 11:29 PM
  • You also get the 0x800f081f - CBS_E_SOURCE_MISSING error:

    2012-12-12 00:20:00, Info                  CBS    Exec: Missing files are found during staging attempt, session not qualified for WU download..
    2012-12-12 00:20:00, Info                  CBS    Exec: Missing files for current offline execution. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
    2012-12-12 00:20:00, Info                  CSI    00000011@2012/12/11:23:20:00.023 CSI Transaction @0x6c008460a0 destroyed

    DISM was able to copy some files, but not all files. Is the ISO file ok?


    "A programmer is just a tool which converts caffeine into code"

    Wednesday, December 12, 2012 5:57 AM
  • I have tried several different ISO files, all the same error
    Wednesday, December 12, 2012 6:51 AM
  • I have run a hashcheck of the iso file i have access to right now

    http://dl.dropbox.com/u/12087045/9200.16384.WIN8_RTM.120725-1247_X64FRE_ENTERPRISE_EVAL_EN-US-HRM_CENA_X64FREE_EN-US_DV5.ISO.md5

    Wednesday, December 12, 2012 7:33 AM
  • the MD5 hash is correct. Copy the files to C: and point to the files on your HDD. Does this work?

    "A programmer is just a tool which converts caffeine into code"

    Wednesday, December 12, 2012 3:01 PM
  • I tried another thing, and that was to unzip the .iso file... When unpacking it, the netfx35 files couldn't unpack, dont know why.

    I have uploaded a screenshot to my dropbox

    http://dl.dropbox.com/u/12087045/Screenshot.png

    Thursday, December 13, 2012 9:03 AM
  • I have tried pointing it to the place on my C drive where the iso file is, it still comes up with the 0x800F081F error code. WHY U NO WORK?!
    Thursday, December 13, 2012 9:08 AM
  • I have solved the problem now. I have run the Restorehealth command a couple of times, with no succes. I tried it again and then right after ran the install of Runtime 3.5 downloaded from the Microsoft website. The full package, just over 200mb.

    It then worked flawlessly

    Thursday, December 13, 2012 11:19 AM
  • I have solved the problem now. I have run the Restorehealth command a couple of times, with no succes.

    It then worked flawlessly

    great :)

    "A programmer is just a tool which converts caffeine into code"

    Thursday, December 13, 2012 4:17 PM
  • Hi 

             IF this process  showing any error or unable to update windows features please use this patch and run this one in any where in Windows 8 then u can enable  dotnet 3.5 in appwiz.cpl.

    ________________________________________

    @set WindowsPath8=F:\sources\sxs

    @if not exist  %WindowsPath8% (
    @echo Windows 8 installation Source not exist %WindowsPath8%
    @echo Please update the Wndows installation Source path in this Script
    @goto Done
    )
    @dism.exe /online /enable-feature /FeatureName:NetFX3 /Source:%WindowsPath8% /LimitAccess
    :Done
    @pause

    ________________________________

    in between lines copy the text and paste in note pad and save it as bat file (dotNetcommand.bat)

    Wednesday, December 19, 2012 4:38 AM
  • many application require .net 3.5 to install on Windows 8 but it's no possible any idea ?
    Does anyone know how to add this with the Unattend file
    Thursday, December 20, 2012 4:35 AM
  • Hi 

               As you mentioned  below text make as a bat file report  in Windows 8 and run once in any where then start what the application you need to install you can if any more info please contact me through this mail at any time.

    ----------------------------------

    @set WindowsPath8=F:\sources\sxs

    @if not exist  %WindowsPath8% (
    @echo Windows 8 installation Source not exist %WindowsPath8%
    @echo Please update the Wndows installation Source path in this Script
    @goto Done
    )
    @dism.exe /online /enable-feature /FeatureName:NetFX3 /Source:%WindowsPath8% /LimitAccess
    :Done
    @pause

    ----------------------------------------

    in between lines copy the text and save this file as .bat file then run 

    Thursday, December 20, 2012 5:57 AM
  • Hi there

    I have tried all methods, the next step for me is to show you the logs you request from everyone else.  Please find below. Thank you heaps

    https://skydrive.live.com/redir?resid=D8D1CB6CBDEEEA25!140&authkey=!AIS2Ih7FDFvhy1E

    I am geographically located in New Zealand
    Saturday, December 22, 2012 8:27 AM
  • Hi there

    I have tried all methods, the next step for me is to show you the logs you request from everyone else.  Please find below. Thank you heaps

    I am geographically located in New Zealand

    Hi Charlotte,

    you've uploaded the wrong files. I need the CBS.log and the DISM.log.


    "A programmer is just a tool which converts caffeine into code"

    Saturday, December 22, 2012 3:00 PM
  • https://skydrive.live.com/redir?resid=D8D1CB6CBDEEEA25!140&authkey=!AIS2Ih7FDFvhy1E

    Thanks, sorry about that

    Saturday, December 22, 2012 11:32 PM
  • https://skydrive.live.com/redir?resid=D8D1CB6CBDEEEA25!140&authkey=!AIS2Ih7FDFvhy1E

    Thanks, sorry about that

    You've entered the wrong DISM command. You miss the spaces, the featurename is wrong and the flag LimitAccess is written incorrectly. Copy and paste my comand into a command prompt and run it.

    If it still fails, upload the new CBS.log


    "A programmer is just a tool which converts caffeine into code"

    Sunday, December 23, 2012 5:10 AM
  • Hi again, I have tried that method more than 5 times before and none of it has worked.  Can you keep looking through for a different reason to try, because I am sure it's not that.
    Sunday, December 23, 2012 5:26 AM
  • Wholey shit - i love you!!! HAH that has been driving me nuts for the past couple of months, all it was was the spaces, I didn't realise they were in there the first time.

    Thank you so much for your help

    Sunday, December 23, 2012 5:38 AM
  • Thank you so much for your help

    You're welcome.

    Merry Christmas and a happy new year :)


    "A programmer is just a tool which converts caffeine into code"

    Sunday, December 23, 2012 6:10 AM
  • Hi Roberto 

                  For your query you need to enable dotnet 3.5 in appwiz.cpl(Add and remove in cntrol pannel ) if your not getting any success i have one bat file you need to run that file in Windows 8 system any where.

                 First try to enable dotnet 3.5 in control pannel is your not getting success revert me .

    @regards

    M. Nagendra Kumar  

    Sunday, December 23, 2012 1:22 PM
  • Hi,

    I get the access is denied error as well. I ran the cmd with administrator rights and I didn't install any 3rd party security tools... DeNiez said he unistalled symantec workspace virtualization agent, which I didn't seem to have. I don't know what to do.

    Thursday, December 27, 2012 9:23 PM
  • I am having the same issue. I have read this entire thread and followed all suggestions, however it still won't work for me!

    This is a fresh install of Windows 8, however I feel the problem may be to do with permissions somewhere (as I copied my entire user folder from the old installation).

    CBS Log - https://docs.google.com/open?id=0BwB8e0hZ9efKNXFsYWNWeTRzb28

    DISM Log - https://docs.google.com/open?id=0BwB8e0hZ9efKYWxjN1hoYkhhaUU

    These have been edited so they only show (what I believe to be) relevant information, if the entire logs are needed please let me know.

    I greatly appreciate any help!

    I am located in Australia.
    • Edited by vorsprung89 Thursday, January 03, 2013 6:35 AM
    Thursday, January 03, 2013 6:31 AM
  • I am having the same issue. I have read this entire thread and followed all suggestions, however it still won't work for me!

    This is a fresh install of Windows 8, however I feel the problem may be to do with permissions somewhere (as I copied my entire user folder from the old installation).

    CBS Log - https://docs.google.com/open?id=0BwB8e0hZ9efKNXFsYWNWeTRzb28

    DISM Log - https://docs.google.com/open?id=0BwB8e0hZ9efKYWxjN1hoYkhhaUU

    These have been edited so they only show (what I believe to be) relevant information, if the entire logs are needed please let me know.

    I greatly appreciate any help!

    I am located in Australia.
    Gave up... did a total re-install of Windows and it's working fine.
    • Proposed as answer by Tharinda_tpw Saturday, January 05, 2013 12:57 PM
    Friday, January 04, 2013 2:44 AM
  • When i going to download  .Net Framework 3.5 (include .net 2.0 and 3.0) using the windows features, I got the error 0x800F0906 in many times...

    then i try to  install using with DISM using the below command,

    dism.exe /online /enable-feature /featurename:NetFX3 /Source:J:\sources\sxs /LimitAccess

    where the my ISO image mount driver is J and I've got the below error 

    C:\Windows\system32>dism.exe /online /enable-feature /featurename:NetFX3 /Source
    :J:\sources\sxs /LimitAccess

    Deployment Image Servicing and Management tool
    Version: 6.2.9200.16384

    Image Version: 6.2.9200.16384

    Enabling feature(s)
    [===========================65.8%======                    ]

    Error: 0x800f081f

    The source files could not be found.
    Use the "Source" option to specify the location of the files that are required t
    o restore the feature. For more information on specifying a source location, see
     http://go.microsoft.com/fwlink/?LinkId=243077.

    The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

    Because of this i am stuck with all my work and really fed up with this

    both  CBS and DISM log files are here 

    https://www.dropbox.com/s/6orafipl48hikwe/Logs.zip

    please help to solve this 

    Saturday, January 05, 2013 2:24 PM
  • When i going to download  .Net Framework 3.5 (include .net 2.0 and 3.0) using the windows features, I got the error 0x800F0906 in many times...

    then i try to  install using with DISM using the below command,

    dism.exe /online /enable-feature /featurename:NetFX3 /Source:J:\sources\sxs /LimitAccess

    please help to solve this 

    2013-01-05 18:12:27, Info                  CBS    Failed to internally open package. [HRESULT = 0x800f0805 - CBS_E_INVALID_PACKAGE]

    Run the scan/Restore health commands posted here and try again.


    "A programmer is just a tool which converts caffeine into code"

    Sunday, January 06, 2013 7:15 AM
  • Please I'm having serious problem installing .Net framework 3.5. Haven followed most(if not all) the instructions I'm still left red faced with the DISM stopping at 65.8%. I have done Cleanup-image /CheckHealth & /RestoreHealth with both successful even though the later would pause at 20% till like 10-15 minutes while I keeping refreshing. Save me from another gruelling week of no sleep please. I've not been able to get the link to the logs I uploaded on SkyDrive. I just uploaded the zip folder, that's all. Thank you.
    • Edited by ifebazz Sunday, January 13, 2013 1:03 AM additional information
    Sunday, January 13, 2013 12:52 AM
  • select the link, and open the share properties to get the link.

    "A programmer is just a tool which converts caffeine into code"

    Sunday, January 13, 2013 8:23 AM
  • I think I've got it. Here my logs: //sdrv.ms/W1H0g2  Hoping for a quick assistance. Thanks. Oops! couldn't paste the http: because you guys have not verified my account as it said. I have tired bro.
    Sunday, January 13, 2013 9:23 AM
  • I think I've got it. Here my logs: //sdrv.ms/W1H0g2  Hoping for a quick assistance. Thanks. Oops! couldn't paste the http: because you guys have not verified my account as it said. I have tired bro.

    You also have the 0x800f081f (CBS_E_SOURCE_MISSING) issue. is the ISO ok?

    "A programmer is just a tool which converts caffeine into code"

    Sunday, January 13, 2013 11:41 AM
  • I guess so. Any way I can find out if defective? (Assess is denied on CBS files.)
    Sunday, January 13, 2013 7:01 PM
  • check the SHA1-Hashes.

    "A programmer is just a tool which converts caffeine into code"

    Monday, January 14, 2013 5:35 AM
  • Please I have downloaded the HashCheck file, so how do I go about checking my SHA1 hashes? Sorry I'm not very programming literate. :(
    Monday, January 14, 2013 5:11 PM
  • right click on the ISO, select properties and look under "checksums"

    Now compare the values to the SHA1 from the Technet/MSDN Download page.


    "A programmer is just a tool which converts caffeine into code"

    Monday, January 14, 2013 7:00 PM
  • I am also unable to install .net 3.5 on windows 8 here is my logs file : https://www.dropbox.com/s/r1j95ekro2eiwq1/framework%20issues.zip




    • Edited by proces91 Tuesday, January 15, 2013 8:54 AM
    Tuesday, January 15, 2013 8:50 AM
  • I have done the checksum, all matched. Anyway here's the link to it; http://sdrv.ms/Uo3jOu
    Tuesday, January 15, 2013 7:05 PM
  • I have done the checksum, all matched.

    ok, I've compared them with my files and they are ok.

    I have no real idea. Run the Restore health command if this is also ok, refresh Windows 8:

    http://blogs.msdn.com/b/b8/archive/2012/01/04/refresh-and-reset-your-pc.aspx


    "A programmer is just a tool which converts caffeine into code"

    Tuesday, January 15, 2013 7:42 PM
  • Man I loooooooove you! REFRESHING Windows was the missing link. Finally got it to install. Thanks to you for your patience with me. But Microsoft should desist from making consumers toil like this.
    Wednesday, January 16, 2013 1:35 PM
  • Now that I have gotten my system in good shape, how do I delete the old Windows folder (Windows.old) its just big & occupying needed 15GB of space & Windows is denying me access to do so. I tried changing the folder property from Read Only but still not granted access. Thanks
    • Edited by ifebazz Wednesday, January 16, 2013 10:54 PM
    Wednesday, January 16, 2013 10:49 PM
  • use the disk cleanup tool to delete the old Windows files.

    "A programmer is just a tool which converts caffeine into code"

    Thursday, January 17, 2013 6:11 AM
  • hello

    i tried enabling dotnet feature in windows 8 but error message appeared

    Error: 87
    The limitacces option is not recognized in this context.

    before using this command i used these commands 

    DISM /Online /cleanup-image /CheckHealth

    DISM /Online /cleanup-image /RestoreHealth

    Earler error message Error: 0x800f081f used to apper when i tried enabling .net3.5

    Saturday, January 19, 2013 12:02 PM
  • here is the link to my dism log file...in case u need it

    dropbox.com/s/bb2sdayykhq5re3/dism.rar

    Saturday, January 19, 2013 1:02 PM
  • Hi. Tried most (if not all) all the methods here. But still experience the 0x800F0906 and 0x800F081F errors.

    Please check my attached logs.

    https://docs.google.com/file/d/0B3dVA-7HahnOckR6VjczSkJkQnM/edit

    https://docs.google.com/file/d/0B3dVA-7HahnOMXJpQm9MWWgzblU/edit
    https://docs.google.com/file/d/0B3dVA-7HahnOQ25HMkMzSWtjX0k/edit

    Thanks in advance

    Wednesday, January 23, 2013 7:42 AM
  • I tried the said code:

    dism.exe /online /enable-feature /featurename:NetFX3 /Source:e:\sources\sxs /LimitAccess

    But this keeps popping up:

    The source files could not be found.
    Use the "Source" option to specify the location of the files that are required t
    o restore the feature. For more information on specifying a source location, see
     http://go.microsoft.com/fwlink/?LinkId=243077.

    The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

    Please help

    BTW 

    https://www.dropbox.com/s/4m0x37w2rtxukwv/dism.log


    • Edited by PtrckRys Sunday, January 27, 2013 2:27 PM
    Sunday, January 27, 2013 2:16 PM
  • Hello,

    I've had an issue with .Net Framework 3.5 for a couple months now. Not sure what the problem is. I have tried everything inside and outside this thread. Have been tempted to refresh my PC but don't really want to lose all of my programs. I'm running Windows 8 and every time I try to launch a program that uses it, I am promted to install it of which I click install and it immediately says completed and I can run the program. Well, after the 100th time going through the process it gets annoying.

    Whenever I try to disable .Net Framework 3.5 I get the unspecified error 0x80004005. Tried disabling through the features and through Command Promt. In CP it gets to 68.5% and than stops.

    If I try the command:

    dism.exe /online /enable-feature /featurename:NetFX3

    It immediately says it completed successfully. I've tried scanning for corrupted files and the first time it found a couple things and repaired them but the next two I tried were clean. I've also tried to repair Windows Update thinking that could be the problem and I have also tried Microsoft's various .Net Framework tools all of which failed to fix the problem. Is there anything else I can try before I have to refresh? I've included my logs, if anyone has any ideas I would appreciate it!

    Logs: https://skydrive.live.com/redir?resid=747AFB7DFB71F5A3!34064

    Monday, January 28, 2013 2:35 AM
  • Hello,

    I have a same problem to install .Net.

    could you analyze my log please?

    this is my log: https://www.dropbox.com/s/kso742p3s70h939/ronaldlog.zip

    btw i use windows 8 pro 64bit

    Thank you very much...

    Ronald

    Thursday, January 31, 2013 3:23 AM
  • I have it too, need to install Zune for win8 32 machine and that requires the .net 3.5.

    If trying to install it with the DISM, getting error 0x800F081F at 65.8%

    Have run the restorehealth several times, and scanhealth is not reporting any errors.

    Have tried 3 different locations (W8CP folder (old), the one in C:\windows and one in my windows usb stick)

    If trying to install it through add/remove features or to run the offline installer, getting eventually error 0x800f0906

    Enabled also the windows update service as was suggested in one thread.

    Maybe this is connected someway with the crappy 3g connection, which seems to drop all connections which are open for long time, although cannot see how that affects local installer...

    logs:

    CBS

    https://skydrive.live.com/redir?resid=7B69334260856874!320&authkey=!AMNAKIBEHTlaTnM

    DISM

    https://skydrive.live.com/redir?resid=7B69334260856874!318&authkey=!AAEBCQ6O4JggtVM

    WU

    https://skydrive.live.com/redir?resid=7B69334260856874!319&authkey=!AKlqFz0z5E9Nk2o

    Maybe I have missed something but I think I am hitting brick wall here. 

    Tuesday, March 26, 2013 10:41 AM
  • THANK YOU ITS WORKS FOR ME COPY sxs FOLDER FROM source DIRECTORY TO ANY HARD DRIVE FOLDER

    FROM THAT FOLDER TAKE cmd  OR  GOTO CMD TO THAT COPIED FOLDER

    C:\sxs>DISM.exe/online /enable-feature /featurename:NetFX3 /LimitAccess /SOURCE:C:

    Deployment Image Servicing and Management tool
    Version: 6.2.9200.16384

    Image Version: 6.2.9200.16384

    Enabling feature(s)
    [==========================100.0%==========================]
    The operation completed successfully.

    THANK YOU

    http://my.opera.com/hariomsrk277/blog/

    Tuesday, April 02, 2013 11:03 AM
  • Try this first :

    1.open run (win key +r )

    2.enter: gpedit.msc

    3.Expand Computer Configuration, expand Administrative Templates, and then select System.

    4.Open the Specify settings for optional component installation and component repair Group Policy setting, and then select Enabled.

    Restart your pc, then repeat the Windows Update method or DISM method in cmd.

    • Proposed as answer by B1-Alesk Sunday, April 21, 2013 6:04 AM
    Sunday, April 21, 2013 6:03 AM
  • Try this first :

    1.open run (win key +r )

    2.enter: gpedit.msc

    3.Expand Computer Configuration, expand Administrative Templates, and then select System.

    4.Open the Specify settings for optional component installation and component repair Group Policy setting, and then select Enabled.

    Restart your pc, then repeat the Windows Update method or DISM method in cmd.


    • Proposed as answer by B1-Alesk Sunday, April 21, 2013 6:04 AM
    • Edited by B1-Alesk Sunday, April 21, 2013 6:05 AM to better explanation
    Sunday, April 21, 2013 6:04 AM

  • Insert Windows 8 DVD 

    Open cmd as Administrator Mode & 

    dism.exe /online /enable-feature /featurename:NetFX3 /Source:E:\sources\sxs 

    Press Enter.

    Note : E:\sources\sxs  ( DVD Drive Location )

    Thursday, May 09, 2013 3:32 AM
  • this is already answered 1 year ago ;)

    "A programmer is just a tool which converts caffeine into code"

    Thursday, May 09, 2013 6:09 AM