none
I want to connect a device in windows 7 with Serial port???!!!

    Question

  • Dear All,

    for connecting to my device,I create a connection in windows xp (setup an advanced connection/connect directly to another computer/Guest/Computer name/select device i.e.my device is connected to COM1) after doing this work I will set COM1 Baudrate to 38400. then I connect to my device physically now for entering to menu of my device I open internet explorer and to write  
    http://10.0.10.50 in Address bar then by pressing enter I will connect it.

    now I hope to help me for doing this work in windows 7.

    your Sincerely
    M.Etemad

    Wednesday, December 23, 2009 6:05 PM

Answers

All replies

  • You need the following programs.

    TCP-COM:

    TCP-Com - Free software downloads and software reviews - CNET Download.com

    Virtual Serial Port Connection:

    Virtual Serial Port - Virtual COM Port Driver - Create a Virtual Serial Port 

    You may make a pair of virtual COM ports on two computers with Virtual Serial Port Connection, and then configure the connection in TCP-COM.

    This method is also introduced in Wikipedia

    Important Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.


    Arthur Xie - MSFT
    Friday, December 25, 2009 5:38 AM
    Moderator
  • You have not answered the question. Your solution works if both ends are PCs. But what if the other end is a simple device with a serial port?

    I have a COM port on my PC & I want to talk over the serial port, not a virtual serial port routed over IP.

    In XP, this was possible as was described in the original question. How does one do the same thing in Win 7?

    Tuesday, November 02, 2010 8:33 PM
  • First of all need to connect hardware to serial port then you have to installed hardware drivers for that hardware. If your hardware is Networking Equipment and if command line interface is available for configuration then you can go to hyper terminal which is generally given in Start Menu>Accessories>Communication. Your Command prompt must be available by this configuration.
    [url=http://autopartsjunkies.com/]discount auto parts[/url]
    Wednesday, November 03, 2010 6:47 AM
  • Use www.hyperserialport.com to connect your PC to a USB to Serial device. You can use a device such as FTDI FT2232H USB to Serial device. The pins on this connector can connect to your serial port on your device. HyperSerialPort will allow you to set up the baud rate and open the COM port on the PC. Then, you can send/receive characters from your device.
    Thursday, June 07, 2012 11:27 PM