Con più domande
I'm also getting this message when using my removable USB HDD. It's a Freecom drive that seems to be working fine on other machines, however when connected to my Win 7 Pro x 64 I start receiving the "An error was detected on device \Device\Harddisk2\DR4 during a paging operation."
See Attached Event Log:
Log Name: System
Date: 20/02/2010 00:52:48
Event ID: 51
Task Category: None
An error was detected on device \Device\Harddisk2\DR4 during a paging operation.
<Provider Name="Disk" />
<TimeCreated SystemTime="2010-02-20T00:52:48.423000000Z" />
Has anybody got any suggestions as to what can be done to resolve this? I've re-formatted the drive to both NTFS and Fat32 neither make any difference. I have also run chkdsk off of my Vista laptop as its far too slow to complete on the Win 7 machine. I've changed the USB port to a different one, and have tried a seperate USB PCI Card.
Another USB HDD i have attached in an External Caddy works fine as expected. Issue is not resolved by using Safe Mode, reducing amount of RAM or by booting into "Clean Mode"
Any Suggestions welcome as this is really baffling me.
Tutte le risposte
Thank you for your reply. Unfortunately the machine does not have a Floppy Drive, however I will check within the BIOS to see if its confusing the OS by believing a Floppy drive is installed. If I remember right the BIOS doesnt have any mention of a drive.
I can state that this Hotfix is already installed as it is now rolled out via a Windows Update. Sadly this has made no difference to the drive's performance.
In case the BIOS is correct is there any other suggestions as to what this may be?
Im getting excatly the same problem. Whenever I try and backup my laptop to a USB drive I get this erroer in teh event log and my backup fails. Ive tried with mutiple USB drive and different backup software including Acronis True Image and Freecoms NTI Shadow 3. Each time Event ID 51 appears. The problems started just over 2 weeks ago. Im running Windows 7 32bit.
Any thoughts becasue Im stmped as well.
Booting the computer to safe mode and see if the issue persists. If the problem still happens, reinstalling the usb controller:
Reinstall USB controllers
First, please disconnect all USB devices and then perform the following steps:
1. Click "Start", type in Device Manager the Search bar and press "Enter". Click Continue if necessary.
2. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the "Host Controller", click "Uninstall" and click "OK".
3. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
I have already tried Safe Mode im afraid and this has made no difference.
The USB controllers have also been removed, and re-installed. I have even tried a PCI USB Card which made had no effect.
I have tried another HDD (Western Digital Caviar) within an External HDD caddy this seemed to work perfectly fine, so im swaying more towards it could be a fault with the drive.
I have another Portable USB Drive that I want to try tonight, hopefully this will work fine! I will report back on my successes/failures.
I know, that this is an old topic but still, it may help someone.
I had the exactly same issue with event ID 51 with my externa WD harddrive on multiple computers. It turns out, that the harddrive was overheating. After placing it in front of a fan blowing cold air into it, the drive started to function properly again.