none
Virtual PC KB958559 RTM install failed - Start Menu/Program Folder Permissions root cause

    Discuţie generală

  • Seems like a lot of people have been experiencing issues installing KB958559 in Win 7 RTM. My issues was that after installing in windows; rebooting and finalizing the installation it would "fail" at about 98% and then rollback.

    In the event log I was getting "

    Installation Failure: Windows failed to install the following update with error 0x80070005: Update for Windows (KB958559)."



    Upon digging in the "C:\Windows\Logs\CBS\CBS.log" log I found that the issue was a permission error in putting the final shortcut into the Start Menu \Program folder. I don't know how the permissions got screwed up, but my username was the only one with access to "C:\ProgramData\Microsoft\Windows\Start Menu\Programs". To resolve this I cascaded the permissions for the folder one higher down to the program folder. You could probably also temporarily just add full access to 'everyone' until the install works.


    The actual log file error incase anyone is searching is this:
    009-10-09 23:01:55, Error                 CSI    00000020@2009/10/10:03:01:55.393 (F) CMIADAPTER: Inner Error Message from AI HRESULT = HRESULT_FROM_WIN32(ERROR_ACCESS_DENIED)
     [
    [19]"Access is denied.
    "
    ]
    [gle=0x80004005]
    2009-10-09 23:01:55, Error                 CSI    00000021@2009/10/10:03:01:55.393 (F) CMIADAPTER: AI failed. HRESULT = HRESULT_FROM_WIN32(ERROR_ACCESS_DENIED)
     Element:
     [475]"<shortCut xmlns="urn:schemas-microsoft-com:asm.v3" arguments="" destinationPath="$(runtime.startMenu)\Programs\Windows Virtual PC" destinationName="Virtual Machines.lnk" targetPath="%SystemRoot%\system32\vmwindow.exe" iconPath="%SystemRoot%\system32\VMCPropertyHandler.dll,-1009" windowStyle="normal" description="@%SystemRoot%\system32\VMCPropertyHandler.dll,-109" displayResource="%SystemRoot%\system32\VMCPropertyHandler.dll,100" appID="Windows.VirtualPC.UserInterface" />"
    10 octombrie 2009 20:13

Toate mesajele

  • I went so far as to give full control of the entire machine to every group before installing, and it still fails before configuration finishes. I did this by first installing XP Mode and then the update, and then tried it with the update first and XP Mode not installed as suggested on a 7 forum site - none of it worked.

    This is on a brand-new machine that I literally unboxed a week ago (Dell Inspiron), that is running Windows 7 Professional. The only software I've even installed so far is Office '03, Roxio, and my A/V stuff.

    I bought 7 Professional specifically to be able to use XP Mode - and I'm getting really ticked as I have found on forums that this update has been an issue for well over a year with Vista users as well (I never went to Vista). Weren't we being assured for months now that 7 would ship without the issues Vista had?

    If anyone has any help to offer on how to resolves this, I'm all ears.

    Is there maybe any way to just use VPC 2007 SP 1 and get XP Mode to work???
    18 noiembrie 2009 16:32
  • I am having a very similiar problem.   At the reboot part of the install it goes to a black screen and never moves on.  
    20 noiembrie 2009 20:01
  • GlennBowes and serloren,
    Could you please zip and mail C:\Windows\Logs\CBS\CBS.log to wcvdata@microsoft.com?
    Please mention this thread id, you email id and screen name in the mail.

    22 noiembrie 2009 18:51
  • Since posting this, nearly 1200 others have viewed it. I'm not sure if I should be more discouraged that nearly 1200 other people are having the same (or similar) problem...or that nearly 1200 other people have looked at the problem and have no clue how to help me with it...

    Anyway, I await your next communique Thayu.

    Happy Thanksgiving all!!
    25 noiembrie 2009 05:49
  • I am having the same symptoms on a brand new Lenovo W700 running Windows 7 Pro.
    27 noiembrie 2009 17:38
  • Here is the section of the cbs.log file that shows the error during my install.


    2009-11-27 07:41:45, Info                  CSI    000000df Begin executing advanced installer phase 38 (0x00000026) index 558 (0x0000022e) (sequence 597)
        Old component: [l:0]""
        New component: [ml:330{165},l:328{164}]"Microsoft-Windows-VirtualPC-UI-KnownFolder, Culture=neutral, Version=7.1.7600.16393, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=x86, versionScope=NonSxS"
        Install mode: install
        Installer ID: {4006c604-9280-4d68-b731-2fe3d02e84bf}
        Installer name: [8]"Shortcut"
    2009-11-27 07:41:45, Info                  CSI    000000e0 Performing 1 operations; 1 are not lock/unlock and follow:
      LockComponentPath (10): flags: 0 comp: {l:16 b:b144d0fa5e6fca01470000006804e804} pathid: {l:16 b:b144d0fa5e6fca01480000006804e804} path: [l:234{117}]"\SystemRoot\WinSxS\x86_microsoft-windows-v..alpc-ui-knownfolder_31bf3856ad364e35_7.1.7600.16393_none_4629d716ee0102da" pid: 468 starttime: 129037992793820437 (0x01ca6f5eeb014d15)
    2009-11-27 07:41:45, Info                  CSI    000000e1@2009/11/27:12:41:45.966 CSI Advanced installer perf trace:
    CSIPERF:AIDONE;{4006c604-9280-4d68-b731-2fe3d02e84bf};Microsoft-Windows-VirtualPC-UI-KnownFolder, Version = 7.1.7600.16393, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral;82160
    2009-11-27 07:41:45, Info                  CSI    000000e2 End executing advanced installer (sequence 597)
        Completion status: S_OK

    2009-11-27 07:41:45, Info                  CSI    000000e3 Begin executing advanced installer phase 38 (0x00000026) index 559 (0x0000022f) (sequence 598)
        Old component: [l:0]""
        New component: [ml:312{156},l:310{155}]"Microsoft-Windows-VirtualPC-VMNet, Culture=neutral, Version=7.1.7600.16393, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=x86, versionScope=NonSxS"
        Install mode: install
        Installer ID: {81a34a10-4256-436a-89d6-794b97ca407c}
        Installer name: [15]"Generic Command"
    2009-11-27 07:41:45, Info                  CSI    000000e4 Performing 1 operations; 1 are not lock/unlock and follow:
      LockComponentPath (10): flags: 0 comp: {l:16 b:32cad9fa5e6fca01490000006804e804} pathid: {l:16 b:32cad9fa5e6fca014a0000006804e804} path: [l:220{110}]"\SystemRoot\WinSxS\x86_microsoft-windows-virtualpc-vmnet_31bf3856ad364e35_7.1.7600.16393_none_f0140badfc4b6730" pid: 468 starttime: 129037992793820437 (0x01ca6f5eeb014d15)
    2009-11-27 07:41:45, Info                  CSI    000000e5 Calling generic command executable (sequence 2): [30]"C:\Windows\System32\netcfg.exe"
        CmdLine: [52]""C:\Windows\System32\netcfg.exe" -e -c s -i vpcnfltr"
    2009-11-27 07:41:46, Info                  CBS    Progress: UI message updated. Operation type: Update. Stage: 1 out of 1. Percent progress: 96.
    2009-11-27 07:41:51, Info                  CSI    000000e6 Performing 1 operations; 1 are not lock/unlock and follow:
      LockComponentPath (10): flags: 0 comp: {l:16 b:184a4ffe5e6fca014b0000006804e804} pathid: {l:16 b:184a4ffe5e6fca014c0000006804e804} path: [l:234{117}]"\SystemRoot\WinSxS\x86_microsoft.windows.s..ation.badcomponents_31bf3856ad364e35_6.1.7600.16385_none_3868158f24725705" pid: 468 starttime: 129037992793820437 (0x01ca6f5eeb014d15)
    2009-11-27 07:41:51, Info                  CSI    000000e7 Creating NT transaction (seq 1), objectname [6]"(null)"
    2009-11-27 07:41:51, Info                  CSI    000000e8 Created NT transaction (seq 1) result 0x00000000, handle @0x3e0
    2009-11-27 07:41:51, Info                  CSI    000000e9@2009/11/27:12:41:51.972 CSI perf trace:
    CSIPERF:TXCOMMIT;301174
    2009-11-27 07:41:51, Error                 CSI    000000ea (F) Done with generic command 2; CreateProcess returned 0, CPAW returned S_OK
        Process exit code 41001 (0x0000a029) resulted in success? FALSE
        Process output: [l:73 [73]"Trying to install vpcnfltr ...




    ..failed. Error code: 0x8004a029.




    "][gle=0x80004005]
    2009-11-27 07:41:51, Info                  CSI    000000eb@2009/11/27:12:41:51.972 CSI Advanced installer perf trace:
    CSIPERF:AIDONE;{81a34a10-4256-436a-89d6-794b97ca407c};Microsoft-Windows-VirtualPC-VMNet, Version = 7.1.7600.16393, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral;8981947
    2009-11-27 07:41:51, Error      [0x018007] CSI    000000ec (F) Failed execution of queue item Installer: Generic Command ({81a34a10-4256-436a-89d6-794b97ca407c}) with HRESULT HRESULT_FROM_WIN32(14109).  Failure will not be ignored: A rollback will be initiated after all the operations in the installer queue are completed; installer is reliable (2)[gle=0x80004005]
    2009-11-27 07:41:52, Info                  CSI    000000ed End executing advanced installer (sequence 598)
        Completion status: HRESULT_FROM_WIN32(ERROR_ADVANCED_INSTALLER_FAILED)
    1 decembrie 2009 20:20
  • Update:
     Following up with serloren over mail. The issue he is facing seems to be that another update's installation has failed and is now interfering with the VPC installation.

    @wagmandan:
    It looks like you have reached the maximum limit for network filter drivers. Could you uninstall/disable any other network filter driver that you think is not necessay and try installing VPC again?
    5 decembrie 2009 10:45
  • I had VMWare and Virtual Box installed.  When I uninstalled them the update ran fine.
    Thanks.
    7 decembrie 2009 15:09
  • I haven't had any contact with Thayu for quite a while now; I would think that if he were out of ideas he would tell me so - so I suppose he must be too busy to respond further at this time.

    By our exchange back-n-forth, Thayu targeted a failed install of another update as being the problem: that it not installing was somehow blocking this install even though they are unrelated items. The failed install was for a Realtek Nic Driver via Microsoft downloads. In the time since then, I located the install on Realtek's site and attempted to install it - failed. I located a newer driver on their site - installed. And since then, have an even newer driver provided by Dell that also installed fine. At no time did I have any functional probs with my NIC etc, and Windows always listed me as being Up To Date. Also, since then, Windows also offered the driver again in my updates - and it refused to install (as I figured it would). With all of this, and MANY attempts, changes, turning off and on various services etc ...Virtual PC still refuses to install.

    I did in all of this wrangling figure out that the reason the Realtek driver (which was supposed to be optional anyway) fails to install is that it recognizes the newer driver(s) on the system - including the one that the system shipped with almost 6 weeks ago.

    That said, I have an idea, but no idea where to look-how to do it to accomplish it.

    IF I can remove/delete that failed entry of the Realtek-Network-Realtek PCIe Family Controller from the listings in my Windows Update: meaning removing whatever files store the information that says an install of that was attempted...THEN....run Windows Update and when it reappears to install, I'll choose to hide it.

    So if Thayu is correct, my system wouldn't show that failure in the "list of" whatever, and the Virtual PC update wouldn't see a failed install, and should run. If this sounds like complete lunacy/stupidity let me know, but it seems to make logical sense to me. The only thing that keeps me hanging is...no clue how to remove that entry,or where to even find it.

    If anyone has any clues or advice on this (or on any other ways to correct this), I would be extremely grateful. Tomorrow is my last class until Christmas, but if I don't get this up and running to do my Server 2003 Virtual coursework with over the holiday...I'll be totally 100% screwed when I go back after Christmas, and my 70-290 & 291 are coming up fast!

    Thanks all, and have a very blessed and wonderful Christmas!!!

    serloren (loren sanders)
    14 decembrie 2009 21:03
  • I haven't had any contact with Thayu for quite a while now; I would think that if he were out of ideas he would tell me so - so I suppose he must be too busy to respond further at this time.

    By our exchange back-n-forth, Thayu targeted a failed install of another update as being the problem: that it not installing was somehow blocking this install even though they are unrelated items. The failed install was for a Realtek Nic Driver via Microsoft downloads. In the time since then, I located the install on Realtek's site and attempted to install it - failed. I located a newer driver on their site - installed. And since then, have an even newer driver provided by Dell that also installed fine. At no time did I have any functional probs with my NIC etc, and Windows always listed me as being Up To Date. Also, since then, Windows also offered the driver again in my updates - and it refused to install (as I figured it would). With all of this, and MANY attempts, changes, turning off and on various services etc ...Virtual PC still refuses to install.

    I did in all of this wrangling figure out that the reason the Realtek driver (which was supposed to be optional anyway) fails to install is that it recognizes the newer driver(s) on the system - including the one that the system shipped with almost 6 weeks ago.

    That said, I have an idea, but no idea where to look-how to do it to accomplish it.

    IF I can remove/delete that failed entry of the Realtek-Network-Realtek PCIe Family Controller from the listings in my Windows Update: meaning removing whatever files store the information that says an install of that was attempted...THEN....run Windows Update and when it reappears to install, I'll choose to hide it.

    So if Thayu is correct, my system wouldn't show that failure in the "list of" whatever, and the Virtual PC update wouldn't see a failed install, and should run. If this sounds like complete lunacy/stupidity let me know, but it seems to make logical sense to me. The only thing that keeps me hanging is...no clue how to remove that entry,or where to even find it.

    If anyone has any clues or advice on this (or on any other ways to correct this), I would be extremely grateful. Tomorrow is my last class until Christmas, but if I don't get this up and running to do my Server 2003 Virtual coursework with over the holiday...I'll be totally 100% screwed when I go back after Christmas, and my 70-290 & 291 are coming up fast!

    Thanks all, and have a very blessed and wonderful Christmas!!!

    serloren (loren sanders)
    14 decembrie 2009 21:04
  • This is a repeated post from the other 7 Virtualization thread I've been posting on...

    Hi everyone (or anyone who is still checking this thread at least),

    To update, after Microsoft's phone support (NOT Thayu) screwed around with this a while, we ended up with a system that no longer functions, and after a mildly "heated" exchange over the phone between him and a Dell tech, Dell attempted to get the system going. I called back at 2am this morning to finish up where I knew the whole thing was heading...

    After my 2am call, and time spent explaining for the zillionth time, and yet again making some attempts to boot the system - they finally got the point: something in the hardware is royally screwed! Think of every single way that you know to boot or attempt to boot a freezing system - including ones to do a reinstall etc - and double that, and you'll have an idea of how many things were tried (all of them several times).

    As of right now, my Inspiron is sitting upstairs at my desk, its guts laid open for all to see - dead. Just so you understand, it does power up, but nothing can get the system to load past "Windows is loading files" without a complete freeze-lockup.

    Dell said "You've been through enough (Tell me about it!), we are going to swap out the RAM, the motherboard, and the HD for you, I just have to set up a ticket for the tech to come out".

    I told him that this was silly - and lacked was not efficient nor cost effective. When he asked why, I said it made no sense to contact a tech (who they job out of course), ship him parts, and then have him spend 3 hours (possibly much more) including travel time to come to my home, pull the system apart and swap those items when they could far more easily ship me a new system, and me ship this one back since all that's really left is $10 of parts for a case/power (Dell cost not retail<g>).

    He said that he going to leave the processor, video and audio cards too - so much more than $10 parts. I told him that the system uses onboard audio and video - no add-ins, and since we have no idea this point what the hardware issue is, how much sense did it make to leave a proc that could *possibly* be at fault, to have the problem re-emerge in a week and be back at square one with another in-house service call. Given that the system is 5-6 weeks old, stock is not an issue, so better (and much cheaper) to send out an entirely new system, and take this one back in-house. Wham bam no sweat and that's all folks!

    He put me on hold for about 10 minutes, then 5, then 10, then said he had gotten approval to do a full system swap. We went through a bunch more gunk, but I am now awaiting (VERY unhappy that it may be more than 2 weeks to delivery!!) a new system from Dell to replace the new system I took delivery of the 8th of November.

    I am so screwed in so many ways because of all of this that I can't begin to describe what it has and is costing me dealing with this. My darling wife ordered me a new Dell 23" monitor for Christmas which isn't here yet....it may very well be the very last thing we ever order from Dell.

    However, your mileage may vary! ;-)

    Happy New Year all (I think I'll go slash my wrists now...)

    serloren
    30 decembrie 2009 16:20
  • Just hit this problem on a brand new (2 day) system.

     

    However I do have 3 vpn clients installed

     - IBM Mobility Client

    - AT&T Network Client

    - Shewsoft VPN

     

    so the filter driver issue could be related.

    28 martie 2010 08:33
  • Just want to thank evertyone here. I was having the same problem. I uninstalled VMWare 2.x and VirtualBox and now Virtual PC installed perfectly.

     

    Thanks all.

    20 aprilie 2010 10:54
  • Hi Folks,

    I had the similar issue : Windows Virtual PC fails configuring updates at boot up & reverts back all changes.

    Solution that worked for me : uninstall other Virtual machines softwares, reboot  & install windows virtual PC. In my case I had sun virtual box on my laptop, which I had to uninstall & install virtual PC.  Deza vuuuooo... :-)

    Dell E6510 laptop running windows 7 professional X64 


    C# & ASP.NET
    14 mai 2010 15:52
  • I'm seeing a similar issue to others in the thread.  I have no other VM software installed, and no VPN software.  I think the relevant portion of the CBS.log file is:

    2010-07-20 15:54:46, Info                  CSI    000000e3 Begin executing advanced installer phase 38 (0x00000026) index 585 (0x0000000000000249) (sequence 624)
        Old component: [l:0]""
        New component: [ml:316{158},l:314{157}]"Microsoft-Windows-VirtualPC-VMNet, Culture=neutral, Version=7.1.7600.16393, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versionScope=NonSxS"
        Install mode: install
        Installer ID: {81a34a10-4256-436a-89d6-794b97ca407c}
        Installer name: [15]"Generic Command"
    2010-07-20 15:54:46, Info                  CSI    000000e4 Performing 1 operations; 1 are not lock/unlock and follow:
      LockComponentPath (10): flags: 0 comp: {l:16 b:0e6eb5674528cb0149000000d0035005} pathid: {l:16 b:0e6eb5674528cb014a000000d0035005} path: [l:224{112}]"\SystemRoot\WinSxS\amd64_microsoft-windows-virtualpc-vmnet_31bf3856ad364e35_7.1.7600.16393_none_4c32a731b4a8d866" pid: 3d0 starttime: 129241292437272250 (0x01cb28454e0936ba)
    2010-07-20 15:54:46, Info                  CSI    000000e5 Calling generic command executable (sequence 2): [30]"C:\Windows\System32\netcfg.exe"
        CmdLine: [52]""C:\Windows\System32\netcfg.exe" -e -c s -i vpcnfltr"
    2010-07-20 15:54:47, Info                  CBS    Progress: UI message updated. Operation type: Update. Stage: 1 out of 1. Percent progress: 96.
    2010-07-20 15:54:47, Info                  CSI    000000e6 Performing 1 operations; 1 are not lock/unlock and follow:
      LockComponentPath (10): flags: 0 comp: {l:16 b:fb8b20684528cb014b000000d0035005} pathid: {l:16 b:fb8b20684528cb014c000000d0035005} path: [l:234{117}]"\SystemRoot\WinSxS\x86_microsoft.windows.s..ation.badcomponents_31bf3856ad364e35_6.1.7600.16385_none_3868158f24725705" pid: 3d0 starttime: 129241292437272250 (0x01cb28454e0936ba)
    2010-07-20 15:54:47, Info                  CSI    000000e7 Creating NT transaction (seq 1), objectname [6]"(null)"
    2010-07-20 15:54:47, Info                  CSI    000000e8 Created NT transaction (seq 1) result 0x00000000, handle @0x10c8
    2010-07-20 15:54:47, Info                  CSI    000000e9@2010/7/20:19:54:47.922 CSI perf trace:
    CSIPERF:TXCOMMIT;573898
    2010-07-20 15:54:47, Error                 CSI    000000ea (F) Done with generic command 2; CreateProcess returned 0, CPAW returned S_OK
        Process exit code 2 resulted in success? FALSE
        Process output: [l:73 [73]"Trying to install vpcnfltr ...

     


    ..failed. Error code: 0x80070002.

     


    "][gle=0x80004005]
    2010-07-20 15:54:47, Info                  CSI    000000eb@2010/7/20:19:54:47.937 CSI Advanced installer perf trace:
    CSIPERF:AIDONE;{81a34a10-4256-436a-89d6-794b97ca407c};Microsoft-Windows-VirtualPC-VMNet, Version = 7.1.7600.16393, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral;1626898
    2010-07-20 15:54:47, Error      [0x018007] CSI    000000ec (F) Failed execution of queue item Installer: Generic Command ({81a34a10-4256-436a-89d6-794b97ca407c}) with HRESULT HRESULT_FROM_WIN32(14109).  Failure will not be ignored: A rollback will be initiated after all the operations in the installer queue are completed; installer is reliable (2)[gle=0x80004005]
    2010-07-20 15:54:48, Info                  CSI    000000ed End executing advanced installer (sequence 624)
        Completion status: HRESULT_FROM_WIN32(ERROR_ADVANCED_INSTALLER_FAILED)

    Any help would be appreciated.  Windows 7 will not be adopted any time soon in my workplace if I can't get this running.

     

    22 iulie 2010 14:46
  • My problem is almost exactly the same, but the error code is different.

    Problem trying to install Windows 7 XP Mode from Microsoft Site. The failing installation package is Windows6.1-KB958559-x64.msu, (standalone VirtualPC).

    My OS is Windows 7 Professional x64. The insall of XPMode itself is successful, but the install of VirtualPC fails during a call to netcfg -e -c s -i vpcnfltr with error code 0x80070057. I am not getting any "access failed" messages, and I do not have VMWare 2.x or VirtualBox installed on the computer.

    When I execute the offending netcfg command from the PowerShell prompt, I get "Trying to install vpcnfltr ..." followed by "..failed. Error code: 0x80070057", which is the same error code that shows up in the CBS log entry of the installer step.

     

    2010-09-22 16:12:43, Info                  CSI    000000e3 Begin executing advanced installer phase 38 (0x00000026) index 585 (0x0000000000000249) (sequence 624)

        Old component: [l:0]""

        New component: [ml:316{158},l:314{157}]"Microsoft-Windows-VirtualPC-VMNet, Culture=neutral, Version=7.1.7600.16393, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versionScope=NonSxS"

        Install mode: install

        Installer ID: {81a34a10-4256-436a-89d6-794b97ca407c}

        Installer name: [15]"Generic Command"

    2010-09-22 16:12:43, Info                  CSI    000000e4 Performing 1 operations; 1 are not lock/unlock and follow:

      LockComponentPath (10): flags: 0 comp: {l:16 b:28a415a9ab5acb014900000078015404} pathid: {l:16 b:28a415a9ab5acb014a00000078015404} path: [l:224{112}]"\SystemRoot\WinSxS\amd64_microsoft-windows-virtualpc-vmnet_31bf3856ad364e35_7.1.7600.16393_none_4c32a731b4a8d866" pid: 178 starttime: 129296707146436653 (0x01cb5aab8c17502d)

    2010-09-22 16:12:43, Info                  CSI    000000e5 Calling generic command executable (sequence 2): [30]"C:\Windows\System32\netcfg.exe"

        CmdLine: [52]""C:\Windows\System32\netcfg.exe" -e -c s -i vpcnfltr"

    2010-09-22 16:12:43, Info                  CSI    000000e6 Performing 1 operations; 1 are not lock/unlock and follow:

      LockComponentPath (10): flags: 0 comp: {l:16 b:057521a9ab5acb014b00000078015404} pathid: {l:16 b:057521a9ab5acb014c00000078015404} path: [l:234{117}]"\SystemRoot\WinSxS\x86_microsoft.windows.s..ation.badcomponents_31bf3856ad364e35_6.1.7600.16385_none_3868158f24725705" pid: 178 starttime: 129296707146436653 (0x01cb5aab8c17502d)

    2010-09-22 16:12:43, Info                  CSI    000000e7 Creating NT transaction (seq 1), objectname [6]"(null)"

    2010-09-22 16:12:43, Info                  CSI    000000e8 Created NT transaction (seq 1) result 0x00000000, handle @0x10e8

    2010-09-22 16:12:43, Info                  CSI   000000e9@2010/9/22:23:12:43.565 CSI perf trace:

    CSIPERF:TXCOMMIT;234355

    2010-09-22 16:12:43, Error                 CSI    000000ea (F) Done with generic command 2; CreateProcess returned 0, CPAW returned S_OK

        Process exit code 87 (0x00000057) resulted in success? FALSE

        Process output: [l:73 [73]"Trying to install vpcnfltr ...

     

    ..failed. Error code: 0x80070057.

     

    "][gle=0x80004005]

    2010-09-22 16:12:43, Info                  CSI   000000eb@2010/9/22:23:12:43.565 CSI Advanced installer perf trace:

    CSIPERF:AIDONE;{81a34a10-4256-436a-89d6-794b97ca407c};Microsoft-Windows-VirtualPC-VMNet, Version = 7.1.7600.16393, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral;375657

    2010-09-22 16:12:43, Error      [0x018007] CSI    000000ec (F) Failed execution of queue item Installer: Generic Command ({81a34a10-4256-436a-89d6-794b97ca407c}) with HRESULT HRESULT_FROM_WIN32(14109).  Failure will not be ignored: A rollback will be initiated after all the operations in the installer queue are completed; installer is reliable (2)[gle=0x80004005]

    2010-09-22 16:12:44, Info                  CBS    Progress: UI message updated. Operation type: Update. Stage: 1 out of 1. Percent progress: 96.

    2010-09-22 16:12:46, Info                  CSI    000000ed End executing advanced installer (sequence 624)

        Completion status: HRESULT_FROM_WIN32(ERROR_ADVANCED_INSTALLER_FAILED)

    24 septembrie 2010 02:16
  • Hi!

    The problem it's because this cmd "C:\Windows\System32\netcfg.exe" -e -c s -i vpcnfltr" .

    You will get an error when the update try to install a new filter when you have more than 13 on my case...Like VPN Sof, Wifi...

    Solution

    Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Network\{4d36e974-e325-11ce-bfc1-08002be10318}\

    Delete Something that you don't need (Export First) - You can delete for example Virtual WiFi Filter Driver

    Install Update

    Restart

    Remember next time you try to install some network filter you will get the same error if you have more than 13 already installed...


    http://www.resourcesforit.com/
    25 noiembrie 2010 00:13
  • I pulled the hair out of my head for hours over this issue until I found this thread. Kudos to BBNuno for providing the solution.  Sure enough, my work laptop had 13 drivers installed as per instructions above.  Windows VirtualPC installed successfully without any hitches afterwards. Thanks much!!! :-)
    22 iulie 2011 21:41
  • I had this same problem; uninstalled Oracle Virtual Box and everything was fine afterwards.
    18 februarie 2012 18:44
  • Totally the same with me.
    11 iunie 2012 13:45
  • Many Thanks BBNuno

    it worked fine after deleting one of the 13 things that i have installed

    14 august 2012 14:10