none
Windows 7 Ad hoc network with iphone problem.

    Întrebare

  • Hello,

    I have posted this on a third party forum where i found somebody else with the same problem. I will post it here too as a fix has not yet been found. Any ideas will be great.

    Basically when creating an adhoc network in windows 7. And connecting an iphone to it. the wireless displays "waiting for users to connect", and the iphone is unable to pick up ics via windows 7 or any connection between eachother. However the iphone does seem to think its connected to the network via the wireless icon, windows 7 says nothing is connected.

    I have tried on vista and it works perfectly.

    However my computer running ubuntu can connect via windows 7 ics perfectly fine.
    But i still think this must be a windows 7 problem.

    I notice than Vista assigns the wireless adapter the address 192.168.0.1 when ics is enabled.

    The iphone then picks up the following under vista on DCHP

    ip 192.168.0.x
    255.255.255.0
    router 192.168.0.1
    dns 192.168.0.1

    However windows 7 does not assign anything to the wireless adapter, and gives the iphone a 169. ip with a 255.255.0.0 subnet instead. and no router or dchp.

    I attempted to manually assign the wireless adapter on windows 7 to 192.168.0.1 and also manually assign the correct ips and dns etc in the iphone.

    But still the same problem. Strange though how i can use the windows 7 ad hoc network on ubuntu but not the iphone.

    Any ideas?

    cheers
    13 mai 2009 11:47

Toate mesajele

  • Hi there,

    I am having the exact same problem... Iphone gets an IP 169.x.x.x but the computer itself has no IP assigned when connected to the iphone vis adhoc connection.
    ipconfig says media disconnected. Wifi status says "waiting for users to connect". I can get it to work with XP and Vista.

    Is this a remained bug to be fixed for Windows 7?  
    31 mai 2009 22:22
  • bigfish21 and makak,

    Thank  you for reporting the interop issue of Win7 adhoc with iPhone. In order for us to investigate this further, we might need your help in enabling some logs on the Windows 7 system and sharing them with us.  Is it possible for you to email me at huis at microsoft dot com . I can provide you further instructions on enabling the traces as well as the mechanism to upload them to us.  

    Meanwhlie, we will also try to see if we can reproduce this issue locally. Can you please provide the Wi-Fi adapter model and driver version. In an elevated command window, type "netsh wlan show driver" and send back the output.

    Thanks very much in selfhosting Windows 7 and providng feedback.

    Hui Shen [MSFT]
    2 iunie 2009 17:48
  • Hi, has there been any progress with this problem? I have a similar though probably unrelated problem. I can create an ad hoc connection which my iphone can join (as long as it's not WPA2 AES. However the connection appears to be very unstable. I want to use the network to run VNC software but because of the instability of the connection my VNC connection keeps being disconnected. I never encountered this problem with Vista or XP.
    Another problem though this may be on the iphone side of things is that my iphone won't connect to an ad hoc connection with WPA2 personal AES security. My Access point is running WPA2 TKIP and my iphone connects no problem. Could this be a problem with the implementation of WPA2 in ad hoc connections? Unfortunately there is no option for TKIP when creating an ad hoc connection in Windows 7 so I may be stuck with WEP for now.
    Thanks in advance for your help!
    3 septembrie 2009 01:11
  • I have the exact same problem with WPA2 so I changed back to WEP. You say you have an unstable connection.... this sounds to me like you, at last, have a connection (which is great).

    And no - I have all the same problems as bigfish21
    I created http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/cfc75cc7-9009-4636-9c73-ab0f9316bc42/ but it seems like the MVP says its an Apple issue. Therefor I went to Apple http://discussions.apple.com/thread.jspa?messageID=10088178#10088178 but nothing ever happens. I still think this is a Microsoft issue
    3 septembrie 2009 08:05
  • I responded in some detail in the new thread that Meegon created. As I state there, there is no doubt that a change in Win7 relative to Vista contributed to this problem, so help from MS with this issue would be much appreciated. My wireless network adapter is the Intel 4965AGN, Microsoft (?) driver version 12.4.1.4  (netw5v64.sys). Hope this helps! -Joe
    Lenovo X61 tablet, Core2Duo L7700 1.8GHz, 4Gb,Intel 965 integrated graphics, MultiTouch/MultiView screen (pen + resistive touch), Intel turbo memory (disabled..), UltraBase docking station.
    3 septembrie 2009 17:38
  • Meegon and Joe,

    Thank you for reporting this issue. It would be very helpful to collect the Wi-Fi related tracing informaiton for further investigation. Could you please provide logs for us by doing the following from an elevated/administrator command prompt?

            Do the following from an administrative command prompt:
                - Netsh trace start wlan_dbg report=yes
                - netsh ras set tr * en
                - Reproduce your problem
                -
    netsh ras set tr * dis
                -
    Netsh trace stop
             Please send

                   %LocalAppdata%\temp\nettraces\nettrace.cab

            as well as

                   %windir%\tracing


    Once you are done, wait for the final step to complete (could take a few minutes) and then zip the contents in above folders and send the file to us. My email is huis at microsoft.com 

    Thanks,

    Hui Shen [MSFT]

     


    3 septembrie 2009 22:31
  • Just emailed the log files. Of course while trying to reproduce the problems, things chose to go smoothly. I did manage to run into a timeout error on synchronization while logging was on, which I hope will give a clue about potential issues. I wonder if things improved after I switched to the lowly WEP as opposed to WPA, but for now I'll stop testing and wait to see if Meegon's logs show anything conclusive. -Joe

    Edit:  found an older post I made elsewhere: 

    "I cannot set up a WPA2 ad-hoc connection between my iPhone and my X61t. Lowering the security to WEP allows me to connect. However, I used to be able to synchronize files with Documents to Go just fine once connected to the ad-hoc network  in Vista, but with Win7, this does not work. Although D2G does notice the iPhone over WiFi, the 'pairing' process times out." Since then the pairing has worked, but time-outs still occur. 

    Conclusion - it looks like the main issue I have with Docs2Go concerns timeouts.  A separate issue may exist with setting up a WPA2 connection, but I haven't delved into this any further. Meegon, just in case, can you try the same with WEP instead? Highly insecure, so use it only to test. 



    Lenovo X61 tablet, Core2Duo L7700 1.8GHz, 4Gb,Intel 965 integrated graphics, MultiTouch/MultiView screen (pen + resistive touch), Intel turbo memory (disabled..), UltraBase docking station.
    • Editat de JoeSP2 4 septembrie 2009 03:24 added some relevant info
    4 septembrie 2009 03:12
  • Hi there...


    I have sent my trace report to Hui Shen but I am a bit confused about the 'try to repreduce the problem'. The problem is pretty easy to get to, but since the problem does not 'happen' on the Windows site I am a bit confused about for what use the debugging/trace report is worth. In other words: how can a trace report tell why the iPhone does not obtain a valid IP address?
    If you ask me it should be the trace report from the iPhone that should be useful. Anyway - i recognize that the problem is related to the way Windows 7 pools the IP-address (now that Vista works okay).

    The stupid question: who not just look at the way Vista does it and then implement the same method in W7?

    4 septembrie 2009 10:58
  • i forgot about this thread.
    however i recieved a fix off another forum many months ago.

    the fix is basically to use an old atheros driver (cant remember which one think it was a vista version). and overwrite the windows 7 driver with that, took alot of messing about to get windows 7 to except the driver i did it so long ago ive forgot but works perfectly.
    4 septembrie 2009 11:01
  • I recall reading that thread (you're famous), but I think most users there shared the same Atheros wireless card. The relevant thread is here: http://windows7forums.com/windows-7-networking/5397-ad-hoc-network-problem.html . Could still be the same issue though. -Joe

    Edit: just noted that in that thread a user claims that that the problem did not exist in one of the Win7 betas. Perhaps go over some of the late changes to networking?


    Lenovo X61 tablet, Core2Duo L7700 1.8GHz, 4Gb,Intel 965 integrated graphics, MultiTouch/MultiView screen (pen + resistive touch), Intel turbo memory (disabled..), UltraBase docking station.
    • Editat de JoeSP2 4 septembrie 2009 12:11 more info
    4 septembrie 2009 12:08
  • This driver, to overwrite the new one with, isnt that marked on a specific brand? Am I right saying that it wont change a thing for my laptop which is a Dell?
    4 septembrie 2009 15:42
  • no mate i think it was a generic driver for the atheros 5007 chip ill hunt out the thread for u in a little while with the driver there.
    4 septembrie 2009 15:48
  • Yes that would be the thread :)


    i dont know what wireless chipset your using but if your using atheros this should fix your issue.

    im using atheros 50007 on an asus laptop

    Downloaded this

    http://download.boulder.ibm.com/ibmdl/pub/pc/pccbbs/access_ibm_br/7kcna5ww.exe

    Installed under XP compatibility mode.


    Works perfect.

    alternatively if your not using atheros 50007 id take a guess at finding the equivelent xp driver for your chipset and install it in XP compatibility mode.

    Ive installed a more recent build of win7 on a broadcom based laptop will give the phone a try on that when i get a chance see if it works "out the box" so to speak.
    4 septembrie 2009 22:45
  • just tested windows 7 on a broadcom wireless machine and same problem with win7 drivers.
    4 septembrie 2009 23:24
  • I came accross your other thread and tried the XP driver for my wireless card to no avail. Still waiting and hoping that this gets figured out! I will run the trace/log as soon as I get a chance. It might not be for a week or so though. 
    4 septembrie 2009 23:56
  • that driver is only for the atheros 50007EG chip.
    4 septembrie 2009 23:59
  • I know. Mine is a Realtek card. I used the Realtek XP/Vista drivers but like I said, no joy. Very frustrating! This exact same set of hardware had no problems under Vista! 
    5 septembrie 2009 00:22
  • Hi, I have this same problem and was wondering if anyone could tell me where to get the driver (the link dosen't go anywhere anymore) or, if this problem will be fixed in the final version of windows 7 because i can just wait a few days.
    19 octombrie 2009 22:04
  • just tested windows 7 on a broadcom wireless machine and same problem with win7 drivers.

    I am experiencing the same problem and I am using broadcom chipset on both cards. One is a PCI card which is set as ADHOC and the other is a PCMCIA connected to laptop. I have ICS enabled on the wlan card which is set as AD-HOC. But the client WLAN notebook does not get the IP address. And even if I manually type in the address 192.168.137.5 it still wont work. Even if I then ping 192.168.137.1 I receive no reply.

    This has got to be a bug in Win7

    30 octombrie 2009 16:49
  • I was having the same issue and found that using WEP instead of WPA2 (the default) worked without a hitch.
    4 decembrie 2009 03:49
  • Hello everybody,

    I am having the same problem and I could not figure out what the solution is. Would you please take a look at it and give me some comments or solution:

    Previously, I used Ad hoc connection and ICS to get the internet connection to my iPod through my laptop WiFi. It worked perfectly under Windows XP and Windows Vista. Two months ago, I installed Windows 7 and I also configured my ad hoc connection to surf internet on my iPod. It worked for several weeks. After that it stopped working. I did not do any serious things to my iPod but I did some updates from Microsoft. Do you think that those updates can break the ad hoc connection?

    Of course, previously, I also used the WEP encryption. My WLAN card has the Atheros chip, its serial is: Atheros AR5006X. I tried to install the official drivers from Atheros for Windows Vista (they do not say any thing about Windows 7 therefore I suggest that the drivers are the same). It did not work.

    Now, after creating the ad hoc connection, my iPod even could not join the network. Nevertheless, my iPod can quickly connect to any access point (in my school) thus I think that it would not be a problem of iPod but the problem of Windows 7.

    If you have any idea, advice or comment, please tell me and I will really appreciate it.

    Thank you very much!
    Tran Trung Luu
    24 ianuarie 2010 17:13
  • how about Connectify

    Easily connect any number of WiFi enabled devices to your network including laptops, phones, gaming systems, and more.


    http://www.connectify.me/

    24 ianuarie 2010 17:42
  • Dear Bubbapcguy,

    Thank you for your suggested solution.

    I tried the Connectify for several times and it did not work (I could not connect to the network created by Connectify either). Furthermore, I figured out that the Connectify employs the WPA encryption method (as a default technique, there is no option to change it) thus it is impossible for the iPod (iPhone) to be connnected (it utilizes the WEP encryption). The procedure of Connectify is just enabling the ICS and ad hoc connection as we can do manually with much more customization.

    Would you give me any idea?


    25 ianuarie 2010 04:06
  • Dear Bubbapcguy,

    Thank you for your suggested solution.

    I tried the Connectify for several times and it did not work (I could not connect to the network created by Connectify either). Furthermore, I figured out that the Connectify employs the WPA encryption method (as a default technique, there is no option to change it) thus it is impossible for the iPod (iPhone) to be connnected (it utilizes the WEP encryption). The procedure of Connectify is just enabling the ICS and ad hoc connection as we can do manually with much more customization.

    Would you give me any idea?



    I have the same problem. If I try to connect with Nokia 5800 or a notebook to this adhoc network it connects to the network but never gets IP. Even if I manually input IP it still won't ping.
    Have been talking to M$ support about this issue for a week and no solution came out except change the network card. Which I did and it did not help..
    Strangely on Win XP this works without problem.
    25 ianuarie 2010 08:13
  • I had a similar problem connecting a second laptop. Connectify has fixed my problem! Thanks Bubbapcguy! Regards, Steve
    26 martie 2010 11:03
  • I read all your case and proff some things. Now I have "my solution."

    Windows 7 assing 192.168.2.1 ip and 255.255.255.0 at first time that I create the ad-hoc connection.

    I write in my iphone configuration 192.168.2.172 , 255.255.255.0  ,192.168.2.1 (router) and  DNS in my case  80.58.0.97, 80.58.0.33.

    After all this I reinstalled the ultimate drivers to my lan and wifi adapters.

     

     

    Sorry for my english.

     

    11 aprilie 2010 12:31
  • I solve it with WEP encryption. WES didn't work. (on Lenovo T510 with Realtek Wlan card driver)

    All on Win7 to connect iPhone for sharing internet connection.


    Now it's working fine.

    1 iunie 2010 05:25
  • I have tried both "Connectify" and  Windows 7 native ad-hoc connection setup manually.

    I was able to succeed to connect iPhone with both connections (in seperate instances) but both have stability problem.

    Once it got disconnected it is very difficult to reconnect. Out of the severel tries which included even restarting PC, 2 or 3 times iPhone got connected with DHCP (yes iPhone got IP address 192.169.2.XX from DHCP)  with wireless security enabled.

    Another problem I find is the hardcored Gateway address 192.168.2.1 for the ad-Hoc and Connectify connections.
    I already have a router running in the network with the same address and I don't want to change it's address.

    How we can change the  gateway address on windows 7 native Ad-hoc connection (ie from 192.168.2.1 to something like 192.168.4.1) ?

    15 iulie 2010 06:03
  • Dear All,

     I still have such problem no matter I switch off the security or not. I am using Win7 x64 with Intel 6200 AGN latest driver 13.3.0.24. May I know does anyone can help me to solve?

    Thanks a lot!

    30 august 2010 09:21
  • My problem seems to be solved. I was using a Linksys USB adaptor (WUSB300N) which was seems to be unstable.

    Now I used another USB adaptor (Alfa long range Taiwan made) and infact was much cheaper than linksys and now I can almost connect iPhone to Wifi internet with minimal of interruptions.

    So the these problems might be related to either the installed drivers for wireless adaptor or either the problems of hardware it self.

    Regarding hardcored gateway address  192.168.2.1 which could actually we can change from registry.

    I don't remember the exact places to be edited, But search for  "192.168.2.1" in values without quotes and replace to other IP range such as 192.168.4.1 or a suitable gateway address that does not conflict with existing gateways in the network. and (may be a restart required, does not mind just restart). After this the network gateway conflict problem was solved ( iPhone got ip address in the new gateway address series)

    30 august 2010 10:11
  • I have the same issue. Win7 x64 with Intel 6300 AGN drivers.

     

    How do we get to connect Win 7 to an ad-hoc network on the iPhone?

    3 decembrie 2010 12:23
  • Dear All,

    you can download Connectify on window 7 from here:

    http://www.connectify.me/docs/index.html?v=2.1.0.16429#basic

    Then you can make your wlan-card as accses point via this software.

    Now it's working fine.

     

    • Propus ca răspuns de akanphade 3 ianuarie 2012 10:07
    8 decembrie 2010 13:30
  • Thank you  ....  I found a solution with this .....
    4 ianuarie 2011 09:04
  • Windows 7 Adhoc network network for Iphone 4

    First of all remove the generic drivers of Windows 7. Download the drivers of the wireless network card from manufacturers site and install. Open Network and sharing center - > Set up a new network - Set up a wireless ad hoc -> Next- Next -> Network name , WEP and password-> Share my internet connection ..Done!

    Cheers

    Iphone aficionado

    21 februarie 2011 18:31
  • I was having the same issue and found that using WEP instead of WPA2 (the default) worked without a hitch.


    Resurrecting this thread from the dead.. I too am having problems getting a device (iPhone) to connect to my Windows 7 ad-hoc WPA2-Personal wireless network.  I must lower the security to WEP.  Any ideas?  Was anyone else ever able to accomplish this?

     

    • Propus ca răspuns de lenovox201 11 iulie 2011 17:17
    10 mai 2011 04:48
  • Hello Hunter DG

    I agree. My iPhone works if the security is WEP.

    25 mai 2011 00:38
  • But connectify seems to have conflicts with PPPoE used to connect to internet in China.  Any clue how to fix this?
    28 iunie 2011 16:23
  • I just tried connectify and this works like a charm!!!
    3 ianuarie 2012 10:07
  • I am using iPhone 4S with the OS version as 5.0.1
    3 ianuarie 2012 10:08
  • I connected to my laptop, which is connected to internet via ethernet, via wifi on my iPad2; security is WPA2

     

    - Run a command line prompt with admin rights. (Go to Start. Type cmd in search box. Right click on cmd.exe that appears up above. Click run as administrator.)

    - Type: netsh wlan set hostednetwork mode=allow ssid=MySSID key=Mykey keyUsage=persistent (MySSID and Mykey will be of your own choosing); don't close command line window

    - Go to Network Connections and ensure you see Wireless Network Connection 2; enable ICS for connection you use for internet, i.e. Local Area Connection or Wireless Network Connection; to enable ICS, right click on internet connection and select properties; choose sharing tab up above; ensure check by Allow other network users to connect...; choose Wireless Connection 2 in the drop down; click on Settings; click applicable boxes - I checked all of them; click OK twice

    - Go back to command line window

    - Type: netsh wlan start hostednetwork

    - Connect to network with iPad, iPhone, xbox, laptp, etc. using SSID and key you created

    - If you want to see that it is indeed WPA2, go to command line prompt and type: netsh wlan show hostednetwork

     

    • Propus ca răspuns de JarheadBuckeye 7 ianuarie 2012 09:59
    • Anulare propunere ca răspuns de JarheadBuckeye 7 ianuarie 2012 10:11
    • Propus ca răspuns de jtarrio 4 februarie 2012 13:16
    7 ianuarie 2012 01:35
  • I guess technically I setup a hotspot with the Microsoft Virtual WiFi Miniport Adapter, not an adhoc connection. This accomplishes what Virtual Router or Connectify does without the software.
    7 ianuarie 2012 10:17
  • I gave up about 3-4 times over the last 6-8 hours trying to figure this s#1t out, anyway... SOLUTION - (at least for me)

     

    1. UPDATE TO LATEST DRIVERS... can't stress how important that is... you can change the IP/adhoc/etc 1000s of times with no change.

    2. Straight Adhoc did not work for me no matter what. Got connected etc but no data coming through.

    3. BRIDGE!!!

    4. You must do a clean bridge, forget about ICS etc. Just shift select LAN/Wifi icons in adapters, right click -> bridge and WAIT!

    5. Now do an adhoc follow the instructions somewhere else here, it's pretty easy, must be WEP or OPEN.

    6. Trust me, I didn't have any faith in the Bridge+Adhoc solution I thought it had to be one or the other, but now I have net on my iOS device.

    7. Just for the record I have an Intel Wifi Link 5100 (POS) and dowloaded the latest 64bit driver here:

    http://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=19856

    It also works for these cards:

    Intel® Centrino® Advanced-N + WiMAX 6250
    Intel® Centrino® Advanced-N 6200
    Intel® Centrino® Ultimate-N 6300 and Intel® Centrino® Advanced-N 6200 products
    Intel® Centrino® Wireless-N 1000
    Intel® PRO/Wireless 3945ABG Network Connection
    Intel® WiFi Link 1000
    Intel® WiFi Link 5300 and Intel® WiFi Link 5100 products
    Intel® WiMAX/WiFi Link 5350 and Intel® WiMAX/WiFi Link 5150 products
    Intel® Wireless WiFi Link 4965AGN

    It may work for other cards, check it out first, google your card name + driver... If you are on windows 7:: please "CREATE RESTORE POINT", google it or type it into the start menu on win7.

    also check this website which has links to drivers for other cards: http://virtualrouter.codeplex.com/wikipage?title=Supported%20Devices&referringTitle=Documentation

    also could be an alternative way to get a wifi link going.

    What else? Good luck... it is certainly a pain in the fracking tuckas... 

    Now let me enjoy my new device finally--- geez again a fracking pain!!!

    25 ianuarie 2012 12:02
  • This is so freaking frustrating... No matter how I do it (with ICS or bridging the networks) there is no way I can get my iPhone to obtain an IP address from the ad-hoc WiFi connection on my laptop. Once I create the ad-hoc network and try to join it from my iPhone, first it only works with Open or WEP (what is this, 2005?), and second, the new ad-hoc network on my laptop keeps saying "Waiting for users" and not fully accepting the iPhone's connection. The iPhone thinks it's connected but obviously never gets an IP address assigned, so it doesn't work. I have updated to the latest versions of drivers for my wireless card (Intel Centrino Ultimate-N 6300) and OS (Win 7 SP1 32bit) to no avail.

    The only thing that has worked for me is @JarheadBuckeye's solution of creating a hosted network as a wireless access point, and it even connects with WPA2-Personal, so that's an extra benefit. I did have a lot of problems even doing this until I updated my driver, but not it seems to be working... The problem is that this seems to be rather manual requiring you to start the hosted network manually every time you reboot (or every time you want to use it). The added bonus is that this would even work to share your WiFi internet connection over the same WiFi interface as it uses the virtual WiFi miniport adapter to create a virtual wireless interface so you essentially have two network interfaces...

    4 februarie 2012 13:24
  • I just tried connectify and this works like a charm!!!
    Connectify works fine (sometimes) with my iPhone, but as soon as my Blackberry connects to the wireless access point, it BSODs right away. I've Googled it and apparently many other users are having the same issue with Connectify and some (newer) Blackberry devices... I had to end up uninstalling Connectify. @JarheadBuckeye's solution works fine with my iPhone and my Blackberry. No more BSODs...
    4 februarie 2012 13:26
  • Thank you brother this worked perfectly...I have been so frustrated trying all of the other suggestions...this took two minutes and there are no issues.
    3 martie 2012 07:10
  • Win 7 iPhone IOS 5x with WPA2 does not work in most cases - problems at both ends; there is a huge amount of traffic on this on the net; WEP works but WPA2 does not.

    Some smart kid kind find hacks to work in some instances but a reasonable solutions has to wait until MS & Apple fix the problem until the next update messes it all up again.

    There is a general problem with two entities introducing proprietary or non-standard inelegant solutions to straightforward implementations.

    25 martie 2012 23:26
  • Thanks.  It works now.
    24 mai 2012 19:50
  • I connected to my laptop, which is connected to internet via ethernet, via wifi on my iPad2; security is WPA2

    - Run a command line prompt with admin rights. (Go to Start. Type cmd in search box. Right click on cmd.exe that appears up above. Click run as administrator.)

    - Type: netsh wlan set hostednetwork mode=allow ssid=MySSID key=Mykey keyUsage=persistent (MySSID and Mykey will be of your own choosing); don't close command line window

    - Go to Network Connections and ensure you see Wireless Network Connection 2; enable ICS for connection you use for internet, i.e. Local Area Connection or Wireless Network Connection; to enable ICS, right click on internet connection and select properties; choose sharing tab up above; ensure check by Allow other network users to connect...; choose Wireless Connection 2 in the drop down; click on Settings; click applicable boxes - I checked all of them; click OK twice

    - Go back to command line window

    - Type: netsh wlan start hostednetwork

    - Connect to network with iPad, iPhone, xbox, laptp, etc. using SSID and key you created

    - If you want to see that it is indeed WPA2, go to command line prompt and type: netsh wlan show hostednetwork


    This is the best solution I've found.  Use it.  Thank you very much for providing this.
    12 decembrie 2012 18:10
  • absolutely as it only accepts binary numbers as a password. which means you can only create password with the number 0 and 1 combinations only. ex. 100010001000 or 101010101010

    Kevin Peterson
    www.schoolanduniversity.com

    19 decembrie 2012 11:05
  • Use WEP and its working for me..
    23 decembrie 2012 10:41
  • I gave up about 3-4 times over the last 6-8 hours trying to figure this s#1t out, anyway... SOLUTION - (at least for me)

     

    1. UPDATE TO LATEST DRIVERS... can't stress how important that is... you can change the IP/adhoc/etc 1000s of times with no change.

    2. Straight Adhoc did not work for me no matter what. Got connected etc but no data coming through.

    3. BRIDGE!!!

    4. You must do a clean bridge, forget about ICS etc. Just shift select LAN/Wifi icons in adapters, right click -> bridge and WAIT!

    5. Now do an adhoc follow the instructions somewhere else here, it's pretty easy, must be WEP or OPEN.

    6. Trust me, I didn't have any faith in the Bridge+Adhoc solution I thought it had to be one or the other, but now I have net on my iOS device.

    7. Just for the record I have an Intel Wifi Link 5100 (POS) and dowloaded the latest 64bit driver here:

    It also works for these cards:

    Intel® Centrino® Advanced-N + WiMAX 6250
    Intel® Centrino® Advanced-N 6200
    Intel® Centrino® Ultimate-N 6300 and Intel® Centrino® Advanced-N 6200 products
    Intel® Centrino® Wireless-N 1000
    Intel® PRO/Wireless 3945ABG Network Connection
    Intel® WiFi Link 1000
    Intel® WiFi Link 5300 and Intel® WiFi Link 5100 products
    Intel® WiMAX/WiFi Link 5350 and Intel® WiMAX/WiFi Link 5150 products
    Intel® Wireless WiFi Link 4965AGN

    It may work for other cards, check it out first, google your card name + driver... If you are on windows 7:: please "CREATE RESTORE POINT", google it or type it into the start menu on win7.

    also could be an alternative way to get a wifi link going.

    What else? Good luck... it is certainly a pain in the fracking tuckas... 

    Now let me enjoy my new device finally--- geez again a fracking pain!!!

    [PERFECT SOLUTION]

    This worked for me... And is very easy to implement: "...Just shift select LAN/Wifi icons in adapters, right click -> bridge and WAIT!..."

    THANKS lowlifeskum

    1 august 2013 08:51
  • I have a similar problem with my IPAD 2.   I have a program called virtual router.  i share connection with that because ad hoc didn't work for me at all. Now I have internet connection, but I can only use some of my programs. My web browser can't connect. ( any web browser I did try all of them ). same with my laptop and android phone. What to do? I have a windows 7 host,  windows 7 and 8 doal boot on the other laptop and IOS 6 on the ipad.  Can anyone help?
    15 august 2013 15:31
  • Hey people,

    I have this problem as well and nothing seemed to work for me. I am a normal girl so I don't really know these technical terms you're using(sorry in advance). I set up a ad hoc network a month ago, and read in Apple forums that a WEP password with "32"bit password works perfectly. Found a password generator and created the 32bit password from there. It worked fine for a month, now it stopped working. (maybe it was the windows update, I have no clue)

    Now my ipad and iphone won't even connect to the created ad hoc.

    I live in a student dorm, and the internet here is wired(local) and you have specific IP settings to get connected to it. I don't want to pay extra for a wireless connection, so I really need to solve this problem.

    As I said, the "32"bit WEP password worked fine for me for almost a month, then the connection started to worsen and now it's totally dead.

    If someone could help I would be very grateful
    I have also win7, on my local connection there is the "Atheros AR8131"
    and on my wireless "Atheros AR9285"

    and I also have a Wireless 2 connection, which uses a Microsot Virtual Wifi Miniport.

    thx:)

    20 noiembrie 2013 09:37
  • a easy solution:

    1/add a adhoc connection

    2/*select in same time a wifi and a local connection using CTRL

    * right click on the selection

    * u have a menu with "creat Bridge" between the both connection

    (on the both connection u may disable the share in first time)

    3/ connect a adhoc with your iphone

    AND enjoy

    pray for me, THX


    mail me when it help you:  ketabd@hotmail.fr
    • Editat de islamhelp 21 noiembrie 2013 14:30
    21 noiembrie 2013 14:28