none
Schannel error

    Вопрос

  • After installing Windows 7 Pro on my Dell Lattitude laptop, i receive the following error in System Event Log:
    Source: Schannel
    Event ID: 36888
    Level: error
    User:SYSTEM
    Task Category: none

    have you come across the message?

    thanks
    rob


    Rob Davis
    3 сентября 2009 г. 19:50

Ответы

  • Steve,

    I also had serious schannel problems at the same time that other things were "off-the-rails" on a new laptop with OEM installed 64 bit Windows 7. I began to evaluate software compatibilty through the system even though it was in a failing state.  Even though the software I was installing is said to be W7 compliant, the simulation of 32 bit on 64 bit required testing after observation of software performance issues.  After concluding these tests, the system was abolished and a new copy was installed taking into account the observations during the problem period.  One of these was to replace ZoneAlarm, which had become a suspect, with Trend Micro.  When I did that my bsod (kernel crash) and schannel problems stopped.  This is insufficient evidence to say that ZoneAlarm was the problem, but there is sufficient evidence to say that removing Zone Alarm from the mix replacing it with Trend Micro had a therapeutic effect.  I would suggest testing the Norton product perhaps by deactivating features and if necessary removing the product (in which case W7 default protections should kick in).  I learned to invoke explicit administrator priviledges when installing programs (run as administrator).  At the same time I was resolving driver clash between the ethernet and wifi adapters as well as a funky problem with the NVidia all of which were contributing to system instabilities.   I hope this helps.

    30 марта 2010 г. 13:41

Все ответы

  • After installing Windows 7 Pro on my Dell Lattitude laptop, i receive the following error in System Event Log:
    Source: Schannel
    Event ID: 36888
    Level: error
    User:SYSTEM
    Task Category: none

    have you come across the message?

    thanks
    rob


    Rob Davis
    Is this coming up when you go on certain websites?  It looks like this is an error with IE8, try going on to whatever websites you went on with IE and see if these error's are generated, then try the same websites in Firefox.  This is to see if it's an server (web) issue or not.
    See here: http://www.sevenforums.com/drivers/8900-event-id-36874-a.html
    -Ken | http://ken.wagnerfamily.co.uk
    • Изменено KitKatNinja 3 сентября 2009 г. 20:08 link added
    3 сентября 2009 г. 20:03
  • Rob, did you get anywhere on this message?   I'm seeing it too on my Dell XPS PC Windows 7 Ultimate.  Mine started after a Windows Update.  I had to do a system restore to before the update and I'm still seeing the error.  I have other issues too though.

    I don't use even use IE, so I don't think its any websites I go to.  although IE is used under the covers sometimes.

    Wendy
     
    22 ноября 2009 г. 4:56
  • I'm getting the same on a new hp laptop with windows 7 ultimate.  Fatal error 10 - what is it within schannel and what do I change to eliminate it.  It's not a server issue.  I'm an internet publisher and I can't even access my own site, except by my xp and mac machines.  Whether firefox or explorer, the problem remains.  My settings are ssl 3.0 and tls 1.0.  Any advice or insight is appreciated.

    Thanks,

    Paul
    24 ноября 2009 г. 3:53
  • Update,

    After more investigation, it appears that the ssl/tls schannel issue might be related to port permisisons through the firewall.  I adjusted the permitted internet ports to correspond both to a list of ports believed to be associated with schannel as well as closre matching with the publishing ports on my servers.   I'll give this a run and see whether system behavior improves.  I am so shocked over by the chronic bsods that I just made the leap in judgement that it was another software problem. 

    Up-to-now, bsod frequency diminished after flushing the residuals left by the embedded trial copy of Norton, updated the drivers for the intel (wlan) and realtek (ethernet) communications adapters and disabled the ethernet adapter (there still seems to be a contention after various experiments noting the behaviors, but the wlan is working wonderfully after this change), expanded page file to 107% of on-board memory (there still may be an underlying problem with the page file that diminishes when I mandate such a large initial page file), etc, etc.  So naturally I was in the frame of mind to fault the software.  I would be embarassed and apologetic if its just a detail I overlooked in setting up zonealarm.  

    Peace,

    Paul
    24 ноября 2009 г. 16:30
  • Paul,

    I too am having this issue but on a Windows Server 2008 R2. I have my firewall disabled and Symantec (Norton) Endpoint Protection installed. I am thinking it is something to do with Symantec products. I will be calling them shortly to address this and another issue with Symantec and will update as I find more info...

    Log Name:      System
    Source:        Schannel
    Date:          11/24/2009 8:31:29 AM
    Event ID:      36888
    Task Category: None
    Level:         Error
    Keywords:     
    User:          SYSTEM
    Computer:      IVSTS1.ivs.local
    Description:
    The following fatal alert was generated: 10. The internal error state is 10.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
        <EventID>36888</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2009-11-24T13:31:29.325877900Z" />
        <EventRecordID>7972</EventRecordID>
        <Correlation />
        <Execution ProcessID="528" ThreadID="3784" />
        <Channel>System</Channel>
        <Computer>IVSTS1.ivs.local</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="AlertDesc">10</Data>
        <Data Name="ErrorState">10</Data>
      </EventData>
    </Event>
    24 ноября 2009 г. 17:00
  • My problem went away (along with several others) when I un-did the TakeOwnership changes I had done to various directories. Taking ownership of c:\Program Files was okay, but c:\windows  BAD BAD idea!!!      Even re-applying Administrator Ownership at the top level and propogating it downwards wasn't good enough.   It was not that simple.   Lots of side affects and fixes and false starts and fixes and side affects.  ugh.  I think I've got it all straight now. Have become very familiar with System Restore!   My event log is now clean as a whistle!

    I don't have symantec.

    24 ноября 2009 г. 17:35
  • yes and no.. ... it fixed itself.....


    Rob Davis
    3 декабря 2009 г. 14:27
  • I continually see this same error - except for the hostname, date/time, and exact PIDs and Thread IDs, the XML error data above is exactly as I see it, dozens of times per day.
    This system has never had Symantec software on it. There is no firewall between this system and its Domain Controller (they're 12 inches apart on the same rack, connected by a simple switch). It's a simple Domain - no trust relationships, a single Domain in the Forest, no complicated secure channels to set up on the network, no downversion clients (there's a single XP SP3 workstation in the Domain, this and one other Windows 7 x64 client, and the Windows Server 2008 (32-bit, non-R2) server.

    I am having no visible reliability problems - no BSODs, only the usual number of app crashes, etc.

    I'd really appreciate any deeper analysis anyone can offer, to help understand what this error message actually means...

    Thanks,
    Jay
    7 декабря 2009 г. 18:36
  • Also seeing Schannel errors on brand new 2008 R2 servers with Exchange.
    Any updates on this
    • Предложено в качестве ответа sunriseccscc 19 октября 2010 г. 19:41
    28 марта 2010 г. 1:12
  • I have Norton 2010 installed and I am seeing the same problems. Apps hang and system runs really slow. Browsing is a pain.

    Are there any other suggestions on how to fix this?

    Thanks,

    Steve

    29 марта 2010 г. 17:00
  • Steve,

    I also had serious schannel problems at the same time that other things were "off-the-rails" on a new laptop with OEM installed 64 bit Windows 7. I began to evaluate software compatibilty through the system even though it was in a failing state.  Even though the software I was installing is said to be W7 compliant, the simulation of 32 bit on 64 bit required testing after observation of software performance issues.  After concluding these tests, the system was abolished and a new copy was installed taking into account the observations during the problem period.  One of these was to replace ZoneAlarm, which had become a suspect, with Trend Micro.  When I did that my bsod (kernel crash) and schannel problems stopped.  This is insufficient evidence to say that ZoneAlarm was the problem, but there is sufficient evidence to say that removing Zone Alarm from the mix replacing it with Trend Micro had a therapeutic effect.  I would suggest testing the Norton product perhaps by deactivating features and if necessary removing the product (in which case W7 default protections should kick in).  I learned to invoke explicit administrator priviledges when installing programs (run as administrator).  At the same time I was resolving driver clash between the ethernet and wifi adapters as well as a funky problem with the NVidia all of which were contributing to system instabilities.   I hope this helps.

    30 марта 2010 г. 13:41
  • FYI all,

    I am having the same problem and have linked it with a MailStreet account - exchange server located somewhere else via internet.  I can start Outlook which has this MailStreet account (for the company I work for) and my POP3 account.  At that time, I will get a Schannel error.  I also get an Schannel error there after approximately each hour.  Close Outlook and all the Schannel errors go away.  I have contacted MailStreet and they say its an IE and TLS problem - I don't agree.  I have messed with TLS and it doesn't help. I can removed the MailStreet email account and it all goes away.   Don't know how to fix it but thought this might help.

     

    13 мая 2010 г. 13:42
  • Source: Schannel ( Hi guys im get this error in my Event logs ) Help on know what error is and is it safe and is they an fix out for it thx

    ==============

    Event ID: 36888

    The following fatal alert was generated: 10. The internal error state is 10

    ________________________

    Event ID: 36888

    The following fatal alert was generated: 70. The internal error state is 105

    28 июня 2010 г. 22:26
  • I am getting this error while i play Battlefield Bad Company 2.    it crashes the game and returns me to the desktop.

    anyone have any ideas why?

     

    Log Name:      System
    Source:        Schannel
    Date:          7/14/2010 1:24:27 PM
    Event ID:      36888
    Task Category: None
    Level:         Error
    Keywords:     
    User:          SYSTEM
    Computer:     ------------------
    Description:
    The following fatal alert was generated: 10. The internal error state is 10.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
        <EventID>36888</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2010-07-14T20:24:27.917317100Z" />
        <EventRecordID>78716</EventRecordID>
        <Correlation />
        <Execution ProcessID="596" ThreadID="1080" />
        <Channel>System</Channel>
        <Computer>DANGYOUFAST</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="AlertDesc">10</Data>
        <Data Name="ErrorState">10</Data>
      </EventData>
    </Event>

    • Предложено в качестве ответа acidifilus 30 июля 2010 г. 10:23
    14 июля 2010 г. 20:57
  • Yes i have the same problem with bad company 2 and this error in Schannel 36888 : I think i will be back to XP.. so much troubles with the new win7, and as bonus i have this one

    http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/a611d79d-9865-4a8e-917b-74b0a891912f

     

    XP =no problems at all, win7 = blue shiny screens and kick out of the game

    30 июля 2010 г. 10:26
  • I am also getting the exact same problem whilst playing Battlefield bad co 2..... Well odd as it has only just started to do it after months of playing the game.

    It may be linked to a windows update which my Windows 7 x64 i7 pc didn't like as it kept rebooting on startup after the update was installed. Booting in safe mode fortunately got my out of jail and i was able to then boot in normal mode fine but the update was automatically removed........ something odd there!

    I also had the same 2nd issue as you acidifilus. Random reboots whilst browsing the net, and doing menial tasks. After interigating my crashdump file it was erroring on USB.PORT.SYS. After further tests it appeared it was the LCD screen on my Logitech G15 keyboard that was casuing it!! Swapped the keyboard out and not seen the error again....

    I have spoken to other people who have been having USB issues with windows 7 x64. Keyboards dying etc. I am increasingly doubting the reliability of Windows 7 to be honest.

     

     

     

    18 августа 2010 г. 0:02
  • This problem has the signs of a Denial of service attack. Two machines here with Https are getting these errors, they are matched with Forward audits on 443 from my firewall and the event log errors

    On at least one occasion the web server has HUNG (virtual) and required hammer reset.

    I have removed HTTPs bindings wherever possible and tightened the firewall

    the progenitor of the attack is 213.71.31.241

    10:49:05 External green TCP  213.71.31.241  4454  192.168.0.192  443(HTTPS)
    10:49:06 External green TCP  213.71.31.241  2485  192.168.0.203  443(HTTPS)
    11:15:53 External green TCP  213.71.31.241  1303  192.168.0.203  443(HTTPS)
    11:15:53 External green TCP  213.71.31.241  1310  192.168.0.176  443(HTTPS)
    11:15:53 External green TCP  213.71.31.241  1341  192.168.0.192  443(HTTPS)
    11:30:20 External green TCP  213.71.31.241  4124  192.168.0.203  443(HTTPS)

    each of these is matched with an eventlog Schannel 36888 10/1203  entry on the end server. here is 192.168.0.192.

    Log Name:      System
    Source:        Schannel
    Date:          17/08/2010 11:15:54 AM
    Event ID:      36888
    Task Category: None
    Level:         Error
    Keywords:     
    User:          SYSTEM
    Computer:      zzzzzzzzzzzzzzzzzzzzzzzzzzz
    Description:
    The following fatal alert was generated: 10. The internal error state is 1203.

    there is no log entry in the IIS log for the site....

    I am certain that as one of the machines HUNG at 11:30 ish yesterday and these errors are the last thing in the log before re-start that something is cooking on an exploit.

     


    Jimbo
    Jimbo
    18 августа 2010 г. 21:42
  • I have had this schannel error (Event ID 36888) for a couple of months, which is occurring every time I start up my computer, and it crashes Windows Explorer; I have to restart it each time, which presents no problem at that point. I will frequently go for several days without rebooting, and I have also been in the process of moving my home, so this is the first time I have had the time to look into it. It doesn't appear that any of the previous discussion on this thread fits my problem, so I thought I would see if anyone has any other ideas. Unfortunately, I do not remember what I did the day these events starting showing up, and as far as I know, there is no way to see what software I might have installed on that date. There have been no hardware changes on or about that date.

    Here is my basic system info:

    Win7 x64
    8GB RAM (Crucial Corsair DDR2)
    Intel Core2 Duo E8400 @ 3GHz
    ATI Radeon HD 5800 Series
    Intel DG33FB Mobo

    Any help would be appreciated.

    Stuart

    22 августа 2010 г. 20:01
  • Steve,

    I also had serious schannel problems at the same time that other things were "off-the-rails" on a new laptop with OEM installed 64 bit Windows 7. I began to evaluate software compatibilty through the system even though it was in a failing state.  Even though the software I was installing is said to be W7 compliant, the simulation of 32 bit on 64 bit required testing after observation of software performance issues.  After concluding these tests, the system was abolished and a new copy was installed taking into account the observations during the problem period.  One of these was to replace ZoneAlarm, which had become a suspect, with Trend Micro.  When I did that my bsod (kernel crash) and schannel problems stopped.  This is insufficient evidence to say that ZoneAlarm was the problem, but there is sufficient evidence to say that removing Zone Alarm from the mix replacing it with Trend Micro had a therapeutic effect.  I would suggest testing the Norton product perhaps by deactivating features and if necessary removing the product (in which case W7 default protections should kick in).  I learned to invoke explicit administrator priviledges when installing programs (run as administrator).  At the same time I was resolving driver clash between the ethernet and wifi adapters as well as a funky problem with the NVidia all of which were contributing to system instabilities.   I hope this helps.


    Paul,

    really, this is not a resolved problem. Unmark your comment as an answer, please!

    vjj

     

    23 августа 2010 г. 14:02
  • I have the same problem on BOTH an HP dx2300 desktop Win 7-32 and a Dell Studio 15 laptop Win7-64.

    "The following fatal alert was generated: 10. The internal error state is 10."

    Agree it is not resolved and that none of the above suggestions applies to me (not running Symantec or using Broadcom adaptors).

    On both machines the SChannel errors generate in volume when I fire up Outlook 2007, and also with other applications like Foxit PDF reader.

    Dell has even replaced the Motherboard on the laptop to no effect.  The OS has been clean-reinstalled from scratch to no effect.  Dell refuses to do anything more, saying OS issues are not covered by its extended warranty.

    Come on, Microsoft, we need an investigation and a fix for this issue.  It is generating literally thousands of Event Log errors and must be addressed.  I am having to advise my Clients not to move to Win 7 until this issue is resolved.

    Andrew.

    2 ноября 2010 г. 10:22
  • I am having problems too and the only errors in the event logs are schannel 36888:

    "The following fatal alert was generated: 10. The internal error state is 10."


    I'm running Windows Server 2008 R2 Enterprise with Hyper-V.

    I have an ASUS Maximus III Gene motherboard, onboard Broadcom NIC onboard Creative X-Fi Soundcard.

    Without warning, or event view errors, my OS just freezes, and the only solution is to manually power off the machine causing my RAID 10 to rebuild every time on boot up. It's an unbelievable pain in the *ss. The manual power offs also have corrupt my data drives...

    If I'm playing music, I sometimes get a scratched CD effect looping, then the OS freeze. I initially thought it was the Creative Soundcard, and a lot of posts on the web mention Broadcom NIC drivers, but the only consistent thing I can link to this issue is Win 7 x64/Win 2008 x64

    I've tried disabling TLS in Firefox and and IE8, but can confirm that that doesn't work - and yes I know... it was extremely unlikely to be the solution.

    I have uninstalled the Creative software and disabled my soundcard and rebooted. I will report back if I have any progress on this workaround.

     

     

    10 декабря 2010 г. 10:23
  • Well after further investigation, my Win 2008 Enterprise Hyper-V host server would hang when I powered on the hosted VMs. The schannel error events look to have been a red herring. I'm running McAfee Enterprise 8.7i Patch 3 on this server. After adding On-Access Scanning exclusions to the Hyper-V app folders, VHD folders, etc, I was once more able to power on my VMs without issue.
    13 декабря 2010 г. 11:54
  • I have the following error in my event logs and there are quite a few of them.

    The following fatal alert was generated: 10. The internal error state is 10.

    Whenever Microsoft Silverlight runs Internet Explorer hangs

    I previously posted this question and the referenced Microsoft information indicated that it was a security issue but that it was nothing to worry about. However having so many fatal alerts I feel maybe dragging down my system. I'm experiencing Internet Explorer hanging on a regular basis and trying to determine what may be causing a problem.

    I understand that I'm able to modify the registry in order to make as Schannel less chatty I would preferred understand why these fatal alerts are being generated. and what I can do to resolve the underlying problem

    I'm running Windows 7 ultimate 64-bit and Norton Internet security as well as malware bites.

    Thanks,

    Steve

    SteveUwashere.

    3 января 2011 г. 19:54
  • i have been receiving similar schannel errors.  the fatal alert generated on my machine is "47" instead of "10", but, everything else is the same.  i read somewhere that the schannel errors are generated due to problems with certain websites certificates.  i created a task to run every time the error was encountered (a system message) so that i could determine the site.  i have successfully determined which website is generating the error.  now all i have to do is figure out how to configure windows to accept the certificate.  hope this helps.
    9 января 2011 г. 14:36
  • Hi Mareshah,

    That's very interesting!  Could you list any of the specific websites which you've found to cause the problem?  That could allow us to analyse what's strange about those sites/ their certificates, in hopes of better mapping our own browsing or other network accesses to the times when the Schannel errors arise, to see if what you found could also explain what we're experiencing.

    Thanks,
    Jay

     

    9 января 2011 г. 18:56
  • Hello, This is a simple error of Internet Explorer settings. It is very difficult to eleminate.

    To avoid this problem do these following steps:

    1) Start >> Control Panel >> Network and Internet >> Internet Options

    2) In the Advanced Tab, uncheck all options that use SSL and TLS connections

    3) Click OK button

    4) Restart your browser and computer

    5) Warning: Disable SSL and TLS connection will disable access to email websites that use this type of connection for example: mail.google.com. You will not be able to connect to these websites. Details on Schannel topics can be found here: http://msdn.microsoft.com/en-us/library/ms678421(v=vs.85).aspx

    • Изменено Escherichia coli 4 февраля 2011 г. 15:24 Format text
    • Предложено в качестве ответа arnodieter 24 марта 2013 г. 9:57
    4 февраля 2011 г. 15:22
  • @ Escherichia Coli,

    I am having the same issues with certs, but Im wondering if you have had any adverse effects of turning off SSL\TLS settings besides connecting to email, such as Gmail.  I am running a secure gateway server within a DMZ zone, and turning this off might prevent remote users from connecting to the Citrix|Quest workspaces *externally* that has been created. Another question, did you see any system performance increase or decrease when disabling these features? I have had to manually restart some services, and a total website black-out has occurred until I was able to reset some services, and reboot the system at times. Any recommendations would help.

    Regards,
    Oz

    7 февраля 2011 г. 21:37
  • Hi JQ_83,

    Generally when you disable SSL and TLS connections the system perfomance does not change. I disabled my TLS connections but I keep SSL (both 2.0 and 3.0) working. The Schannel Error disappeared. If you have remote connections be sure that two services: Remote Procedure Call (RPC) and Remote Procedure Call (RPC) locator work properly.

    Hope this helps :P

    10 февраля 2011 г. 7:03
  • I have a similar problem:

    see:

    http://social.technet.microsoft.com/Forums/de-DE/w7itprogeneral/thread/86a70397-a35f-4548-9390-64802e1cc8ec


    assist others - and you can hope of help at self
    25 апреля 2011 г. 13:19
  • right-click on your "my computer" (or whatever you've renamed it) and select "Manage".  Then wander down to "Event Viewer"  --> "Windows Logs" --> "System".  Right-click on the "System" log and select "Clear...".  You may want to save it somewhere for future reference.  I'm only suggesting clearing it because it makes life a bit easier.

    Start IE and select "Tools" --> "Internet Options" then select the "Advanced" tab.

    Scroll down to the "Security" section and look for "Use TLS ...".  You should see three options:

    Use TLS 1.0
    Use TLS 1.1
    Use TLS 1.2

    Uncheck all three and restart your browser.

    If you still have the computer management (event log browser) open, right-click on the "System" icon and select "Refresh".  Your errors should be gone.  I'm just guessing here (but i believe it's an educated guess) that the TLS handshake is failing somewhere and that's causing your errors.

    If someone comes up with a better way to fix this i'd really love to hear it.

    24 февраля 2012 г. 18:04
  • wazole

    >Your errors should be gone.

    Unfortunately not,  although the frequency of error generation may have reduced a bit.  It was previously often generating an error every minute, but has now reduced to every 5 minutes approximately, after disabling TLS 1.0 in IE on my Win7 64-bit machine as you suggest.

    The errors don't occur when I shut down Outlook 2007.  It is connecting to an Exchange 2010 Server on a hosted service at 1and1.co.uk.

    I would emphasize that IE is not running - the errors occur only when Outlook is running, and stop when I shut Outlook down.  As a result I have had to make little use of Outlook on this machine, which is a pain.

    I'd really like someone from Microsoft to do some investigation here.  There are too many of us reporting this error and whilst it may be showing up in different applications I strongly suspect there is a common cause related to the Win 7 OS.  On my Win7 32-bit machine they generate every hour (almost exactly), and it has still logged over 800 errors per month.

    It is not really acceptable for Microsoft to say "don't worry about it".  The high generation of errors muddies the waters on other issues and simply should not be occurring. 


    Regards Andrew :)

    27 февраля 2012 г. 14:56
  • More of a workaround than a fix,

    Event ID 36888 

    Pete


    Regards Pete Long http://www.petenetlive.com

    16 июля 2012 г. 16:15
  • Hello

    This problem has been bugging me for some time, and I believe I have come across the solution by editing the registry. Run regedit and backup your registry before you make changes.

    Right Click Protocols in the following Location:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\
    Control\SecurityProviders\SCHANNEL\

    Create 2 new keys

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\
    Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\
    Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0

     

    Under each protocol right click and create two new keys

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\
    Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\
    Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Server

    Do the same for SSL 3.0 and TLS 1.0

    Now create a DWORD in each client and server key

    DWORD (32bit) Value

    Value name = Enabled

    Value data = 1

    Value data can be set to “1″ – Enabled or “0″ – Disabled

    Best of Luck

    30 июня 2013 г. 2:04
  • That link does work, however instead of disabling SSL 2.0 and TLS 1.0 enable both of them, or else the computer will generate a different SChannel error
    30 июня 2013 г. 2:07
  • I realize this is a very old post but I'm responding to it for those who will read it year after year and just might believe its a possible solution. It isn't, far from it and the poster should not have posted it because its really bad misinformation that will cause more harm than good to a OS.  

    I'm glad it helped him but he misunderstood why it resolved his problem. If you do a massive take ownership like he did on the two main folders of your OS which contain most of if not all your programs, services, components, drivers, etc., etc. you will do serious damage to your OS because some of the services, components and system tools like the Event Viewer MUST have SYSTEM as the "owner" in order to function. The reason it worked for him is because he UN-did what he should've NEVER done in the first place - so he was lucky that he was able to repair it. But his situation was unique. Most users are not stupid enough to do such a risky thing.

    Again.... this error has NOTHING to do with taking ownership of folders.. it also doesn't matter which AV program you have.

    The error is related to Schannel it tells you that very plainly in the properties of the event message. Schannel is a Microsoft Security Support Provider API function that handles web security functions such as Authentication

    This problem pertains to Firewall settings - probably port assignment - meaning either the wrong port number or no port number at all. So look in your Firewall and determine which service or program is unable to access a site, server or administrative privilege. Unfortunately, I cannot give a definitive fix because there are too many variables that each computer has in their settings.


    Of course, it's just my opinion....I could be wrong!

    • Предложено в качестве ответа pippin33 29 октября 2013 г. 6:04
    29 октября 2013 г. 6:03
  • /agree completely with pippin33

    This issue isn't resolved at all. It gets tiring when a comment that contains misleading information gets upvoted as an answer. Makes finding a real answer all the more difficult since the moderators will simply take it for granted that the marked answer is an answer when it is barely more than a lengthy comment.

    Please reopen this issue and mark it as NOT answered until someone with actual knowledge of the problem can provide step by step instructions that fix the actual problem.

    4 ноября 2013 г. 6:22
  • You are seriously confused, no one should follow this suggestion. You just disabled all SSL/TLS connections. WTF?
    2 января 2014 г. 19:04
  • My W7 ultimiate x64 system completely cuts out and then has several attempts to restart before finally booting up into the OS. The only error in the event log is this one prior to it happening. 

    Both times it has happened while changing facebook advertising settings in Google Chrome.  

    7 января 2014 г. 22:32
  • The same error kept happening to me and I kept getting kicked off our VPN.  I finally traced the error to Google toolbar.  Once I disabled it I stopped getting these errors.  Apparently the Toolbar intermittently sends info via a secure channel.  Our corporate anti-virus software/firewall, McAfee, does not allow this.

    27 февраля 2014 г. 19:11
  • The same error kept happening to me and I kept getting kicked off our VPN.  I finally traced the error to Google toolbar.  Once I disabled it I stopped getting these errors.  Apparently the Toolbar intermittently sends info via a secure channel.  Our corporate anti-virus software/firewall, McAfee, does not allow this.


    And how do you traced the Problem to Google toolbar?
    10 марта 2014 г. 1:02
  • I agree, I wonder how many checked their firewall logs to see who was hammering them roughly at the time of issue?
    13 апреля 2014 г. 2:41
  • My guess is that you may have a Spectorsoft user activity monitoring application running stealth mode on your machine.  

    15 апреля 2014 г. 11:27
  • My guess is that you may have a Spectorsoft user activity monitoring application running stealth mode on your machine.  
    15 апреля 2014 г. 11:30