none
how to manage remotely?

    Question

  • My client is windows 8

    i have a Hyper-v 2012 server in the cloud.

    this is my first experience with Hyper v ( am using esxi)

    After 8 hours searching and trying im still unable to connect. (only thing that works is connecting wih rdp)

    what do i need to do so that i can  connect to my hyper-v server (with hyper v manager on my client) and start using it?

    i have found this
    http://publicjotting.blogspot.nl/2012/06/hyper-v-server-2012-and-remote-hyper-v.html

    but uits not clear to me what to do where.

    same for this:

    http://technet.microsoft.com/en-us/library/jj647788.aspx

    and for this

    http://archive.msdn.microsoft.com/HVRemote

    how can i get the script on my remote hyper v server?

    Im totally lost.

    any help is very much apperciated.

    thanks for the help

    Wednesday, February 06, 2013 8:51 AM

All replies

  • Hi

    I have made a blog post about remote management http://vniklas.djungeln.se/2013/01/29/remote-management-of-windows-2012-hyper-v-powershell-dism-failure/

    Do you have both the client and the hyper-v server in a windows domain? 

    In the sconfig for the hyper-v server you can enable remote management.

    //niklas

    Wednesday, February 06, 2013 8:54 AM
  • thanks for your reply.

    my setup is very basic

    Windows 8 is workgroup and hyper v 2012 is standalone/workgroup in the cloud

    im sorry but i doesnt understand your blog post

    what do i need to do where?

    i have already installed hyper v manager on my windows 8 client.

    I can rdp to my hyper v server

    but what to do now?

    when i try to connect with hyper v manager all i get  is this

    http://screencast.com/t/zSQaamaA1J3


    thanks



    • Edited by O66 Wednesday, February 06, 2013 9:07 AM
    Wednesday, February 06, 2013 9:00 AM
  • look at this http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/thread/dce25f65-01c5-4a16-bd25-294d35e618f5/

    even if it is for win 7 it should be the same for 2012 and win 8

    Wednesday, February 06, 2013 9:36 AM
  • did all this.

    still no luck

    any ideas how to troubleshoot this?



    • Edited by O66 Wednesday, February 06, 2013 10:14 AM
    Wednesday, February 06, 2013 10:10 AM
  • Speak to your provider, this should be a very common query they get, access depends on how they've set up the infrastructure sitting between your server and the internet.
    Wednesday, February 06, 2013 12:32 PM
  • nothing special

    hyper-v 2012 installed and direct access to internet

    firewall  disabled on server doesnt make any difference

    im about to give up

    this is a nightmare

    Wednesday, February 06, 2013 1:12 PM
  • Hi,

    Most of the times, when we talk about Hyper-V remote management, we mean a remote management scenario in internal network environment. That is there isn’t firewall between management client and Hyper-V host server.

    But you scenario, that is a Hyper-V host server in cloud, so that is in internet?

    I’m not sure whether your client is behind a firewall, but the Hyper-V host in cloud, if it is in an internet cloud, it should have a firewall. And for most of cloud server venders, RDP connection is the only allowed connection method. That means Windows firewall rule for Hyper-V remote management is disabled in cloud server internet firewall.

    You may contact your cloud server vender to check that, also if you has extra server in that cloud, you may configure remote management in that server and check the result.

    For more information please refer to following MS articles:

    Configure Hyper-V Server 2012 for Remote Management
    http://technet.microsoft.com/en-us/library/jj647788.aspx

    Hope this helps!

    TechNet Subscriber Support

    If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.

     



    Lawrence

    TechNet Community Support

    Thursday, February 07, 2013 2:59 AM
  • thanks for your reply.

    my situation:

    Windows 8 in workgroup with Ms account (ie xx@xx.nl) for logging in.
    i have created a local account on client same as on Hyper-v server but i am logged in wth the MS account.

    Server with Hyper-v 2012 in external datacentre access via internet. Account is local.

    i have full access to server and can disable the firewall, unfortunately this doesnt make any difference.

    Client and server are standalone/ different workgroups, no domain.

    is the MS account on the client the problem?

    do i need to reconfigure my pc and login with a local acccount (and lose the MS account benefits)  to be able to connect?

    thanks






    • Edited by O66 Thursday, February 07, 2013 1:59 PM
    Thursday, February 07, 2013 7:53 AM
  • anyone succesful with connnecting from Windows 8 to remote hyper-v 2012?

    workgroup no domain


    Friday, February 08, 2013 8:17 AM
  • i can manage remote hyper v server with server manager, but cant connect with hyper-v manager.

    see video http://bit.ly/XsncCg

    any ideas?



    • Edited by O66 Friday, February 08, 2013 11:05 AM
    Friday, February 08, 2013 11:01 AM
  • Here is a step-by-step guide to get things set up to manage within a workgroup - http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/thread/fe80f0aa-0697-4657-a1da-19d36b036698

    .:|:.:|:. tim

    Friday, February 08, 2013 5:23 PM
  • Thanks, I have followed this guide over and over again. Unfortunately no luck.

    all the steps are ok till adding the firewall mmc. Im not able to connect. maybe this is related to hyper v manager problems.

    ++++++

    ! Client: locate MMC, and run it as an admin.
    # In windows 8/2012, go to search and type MMC. Right-click the icon, 
    # and choose run as admin on the bar below.

    ! Client: application MMC: select "file" --> Add/remove snap-in 
    ! --> (left pane) scroll down to "windows firewall" --> select and click "add"
    ! select "another computer"
    ! type the name of the server you want to manage (NO workgroup/ or //, just same name as you typed for cmdkey)

    * Part 2 is done.
    # Have a look by doubleclicking the firewall icon in the left pane.
    # It looks and works the same as the GUI version that you are familiar with.

    ++++++

    (adding event viewer isnt a problem)

    see video: http://screencast.com/t/dRCon2sDGe

    i have found many entries about this 0x6d9 error

    for instance

    http://bit.ly/Z01jRB

    3 days and counting an still no access

    : Thanks for the help



    • Edited by O66 Friday, February 08, 2013 7:27 PM
    Friday, February 08, 2013 7:26 PM