none
Windows server 2008 print service

    Question

  • Good Afternoon

     

    I wonder if when you add a printer on a server running Windows Server 2008 must increase virtual memory or cache any since I are having problems when sending files to print with a weight of 13 MB and up the printer no longer processing remains nothing but printing does not send anything, but if I set up peer to peer directly sends the printer prints without any problem.

     

    We need to apply some parameter or start a service for heavy files?????
    Friday, January 18, 2013 2:16 AM

Answers

  • No, a too cheap printer usually that mean or a bad print driver.

    They make host based printer. Thus they cut down the cost by removing the formatter board. The driver on the peer make the formatting, but such printer are not suitable to be shared, because they require a lot more permission than a usual driver need.

    If lucky, a laserjet 4's driver could fit. In exemple I often use a laserjet 4 driver on hp 1020 printer, and that seem to do the trick. (even the hp universal does not work). To give another exemple, on a lexmark e212 host based I did the laserjet 4's trick and that worked.

    nb, You might wonder why laserjet4, it's because it's almsot one of the first driver to be standardized, a lot of compagny used that standard to start up with.

     

    MCP | MCTS 70-236: Exchange Server 2007, Configuring

    Twitter - @yagmoth555 ()
    Blog: http://www.jabea.net | http://blogs.technet.com/b/wikininjas/

    Friday, January 18, 2013 3:29 AM