none
Endpoints

    Question

  • having a problem adding a machine to the domain.  We have added several servers and workstations but this one is a problem.

    The error message is:

    There are no more endpoints available from the endpoint mapper.

    No errors on the domain controllers.

    What could be the problem here?

     

    Thanks


    norman mattox
    Thursday, January 26, 2012 3:39 PM

Answers

  • Check the below thread, see if you have similar situation.

    There are no more endpoints available from the endpoint mapper

    http://www.petri.co.il/forums/showthread.php?t=49374


    Vote As Helpful, if you find my information useful. This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Thursday, January 26, 2012 4:05 PM
    Moderator
  • The error occurs when there is no communication possible from client machine to the DC and it can be due firewall port being the issues, network connectivity or incorrect dns configurations. Temporarily, stop the local windows firewall and also if any security software like antivirus is installed disable it too and see if it solves your issues. Make sure only local dns server is defined in clients nic.

    http://support.microsoft.com/kb/839880

     

    Regards


    Awinish Vishwakarma

    MY BLOG:  http://awinish.wordpress.com/


    This posting is provided AS-IS with no warranties/guarantees and confers no rights.
    Thursday, January 26, 2012 4:51 PM
    Moderator
  • Hi,

     

    In addition, you may also perform the following troubleshooting suggestions:

     

    1.     Verify that the service registering its service with the endpoint mapper has started

    2.     Verify that RPC client (destination DC) connected to the intended RPC Server (source DC)

    3.     Verify that the server application (Active Directory et al) has registered with the endpoint mapper on the RPC server (source DC)

     

    For the detailed steps, please refer to the following Microsoft KB article:

     

    Troubleshooting Active Directory operations that fail with error 1753: There are no more endpoints available from the endpoint mapper.

    http://support.microsoft.com/kb/2089874

     

    Regards,

     

    Arthur Li

     TechNet Subscriber Support 

    If you are TechNet Subscription  user and have any feedback on our support quality, please send your feedback here . 


    Arthur Li

    TechNet Community Support

    Friday, January 27, 2012 3:13 AM
    Moderator
  • The "No more endpoints available" error message means the RPC Endpoint Mapper was not able to use a port greater than 1024 for a service that runs over RPC. RPC can use ports up to 65535. By default, all versions of Windows use only ports 1024-5000.

    The ports may be blocked by a hardware firewall, a Internet Connection Firewall on Windows Server 2003-based computer and on a Windows XP-based computer, third-party firewall software, or antivirus software that has firewall functionality built-in. By default, port 135 TCP/UDP and ports 1024-65535 TCP must be open for RPC to work

    Reference link:http://support.microsoft.com/kb/839880


    If you haven't changed the RPC port allocation on the servers, you will need to open all high ports (1024-65534/tcp). See http://support.microsoft.com/kb/908472.

    Also refer below link this may be also helpful:
    http://forums.techarena.in/small-business-server/660146.htm

    Hope this helps

    Regards,
    Sandesh Dubey.
    -------------------------------
    MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator
    My Blog: http://sandeshdubey.wordpress.com
    This posting is provided AS IS with no warranties, and confers no rights.

    Friday, January 27, 2012 4:29 AM

All replies

  • Check the below thread, see if you have similar situation.

    There are no more endpoints available from the endpoint mapper

    http://www.petri.co.il/forums/showthread.php?t=49374


    Vote As Helpful, if you find my information useful. This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Thursday, January 26, 2012 4:05 PM
    Moderator
  • please check the NETSETUP.log for any errors. which is located on  %windir%\debug.

    This is where the join process is logged. This log should help you in tracing where the join process is getting failed.

    and also use wire shark /Network Monitor to trace the join operation.


    Gopi Kiran |Facebook| This posting is provided AS IS with no warranties,and confers no rights.

    • Edited by Gopi Kiran Thursday, January 26, 2012 4:49 PM
    Thursday, January 26, 2012 4:45 PM
  • The error occurs when there is no communication possible from client machine to the DC and it can be due firewall port being the issues, network connectivity or incorrect dns configurations. Temporarily, stop the local windows firewall and also if any security software like antivirus is installed disable it too and see if it solves your issues. Make sure only local dns server is defined in clients nic.

    http://support.microsoft.com/kb/839880

     

    Regards


    Awinish Vishwakarma

    MY BLOG:  http://awinish.wordpress.com/


    This posting is provided AS-IS with no warranties/guarantees and confers no rights.
    Thursday, January 26, 2012 4:51 PM
    Moderator
  • From this PC, can you ping the domain controller?  DO you have any firewall between this pc and DC?

    Please post IPCONFIG/ALL from this machine and DC.


    Santhosh Sivarajan | MCTS, MCSE (W2K3/W2K/NT4), MCSA (W2K3/W2K/MSG), CCNA, Network+| Houston, TX
    Blogs - http://blogs.sivarajan.com/

    FaceBook Twitter LinkedIn SS Tech Forum

    This posting is provided AS IS with no warranties,and confers no rights.
    Thursday, January 26, 2012 5:55 PM
  • Hello,

    if the mentioned articles doesn't help please post the already requested output here, so we can start with some basic settings.


    Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Thursday, January 26, 2012 7:48 PM
  • Hi,

     

    In addition, you may also perform the following troubleshooting suggestions:

     

    1.     Verify that the service registering its service with the endpoint mapper has started

    2.     Verify that RPC client (destination DC) connected to the intended RPC Server (source DC)

    3.     Verify that the server application (Active Directory et al) has registered with the endpoint mapper on the RPC server (source DC)

     

    For the detailed steps, please refer to the following Microsoft KB article:

     

    Troubleshooting Active Directory operations that fail with error 1753: There are no more endpoints available from the endpoint mapper.

    http://support.microsoft.com/kb/2089874

     

    Regards,

     

    Arthur Li

     TechNet Subscriber Support 

    If you are TechNet Subscription  user and have any feedback on our support quality, please send your feedback here . 


    Arthur Li

    TechNet Community Support

    Friday, January 27, 2012 3:13 AM
    Moderator
  • The "No more endpoints available" error message means the RPC Endpoint Mapper was not able to use a port greater than 1024 for a service that runs over RPC. RPC can use ports up to 65535. By default, all versions of Windows use only ports 1024-5000.

    The ports may be blocked by a hardware firewall, a Internet Connection Firewall on Windows Server 2003-based computer and on a Windows XP-based computer, third-party firewall software, or antivirus software that has firewall functionality built-in. By default, port 135 TCP/UDP and ports 1024-65535 TCP must be open for RPC to work

    Reference link:http://support.microsoft.com/kb/839880


    If you haven't changed the RPC port allocation on the servers, you will need to open all high ports (1024-65534/tcp). See http://support.microsoft.com/kb/908472.

    Also refer below link this may be also helpful:
    http://forums.techarena.in/small-business-server/660146.htm

    Hope this helps

    Regards,
    Sandesh Dubey.
    -------------------------------
    MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator
    My Blog: http://sandeshdubey.wordpress.com
    This posting is provided AS IS with no warranties, and confers no rights.

    Friday, January 27, 2012 4:29 AM
  • Hi,

     

    I would like to confirm what is the current situation? If there is anything that I can do for you, please do not hesitate to let me know, and I will be happy to help.

     

    Regards,

     

    Arthur Li

     TechNet Subscriber Support 

    If you are TechNet Subscription  user and have any feedback on our support quality, please send your feedback here .


    Arthur Li

    TechNet Community Support

    Wednesday, February 01, 2012 7:25 AM
    Moderator