none
Full Duplex setting

คำตอบ

  • My guess is that you'd need to use the NIC-specific registry key to set this under:
    HKLM\SYSTEM\CurrentControlSet\Control\Class\GUID\INTNUM\Vendor-specific-registrykey

    I needed to do this for a couple of different registry keys to get 802.1Q VLAN tagging to work. 

    The GUID seems to be different between server to server, but the first part of the GUID is always {4D36E972 so I used the following code to set my parameters:

    @ECHO OFF
    FOR /F "usebackq" %%a IN (`REG query HKEY_LOCAL_MACHINE\SYSTEM\CurrentcontrolSet\Control\Class /f {4D36E972*`) DO CALL :LOOP %%a
    GOTO END

    :LOOP
    IF NOT [%1]==[End] (
     REG ADD %1\0007 /v VlanFiltering /t REG_SZ /d 0 /f
     REG ADD %1\0012 /v VlanID /t REG_SZ /d 1 /f
     )
    EXIT /B
    GOTO END

    :END

    It is not pretty and I still haven't found an automatic way of matching particular interfaces of a dual port card to which number they are expect handrollicly.

    For my on board HP DL 380G5 NIC the setting was *SpeedDuplex, REG_SZ where:
    0=Auto
    1=10 Half
    2=10 Full
    3=100 Half
    4=100 Full
    2164261634=1Gb Full Auto

    Cheers,
    Jeremy.

    • เสนอเป็นคำตอบโดย JeremyHagan 14 สิงหาคม 2551 23:04
    • แก้ไขโดย JeremyHagan 14 สิงหาคม 2551 23:09 Updated
    • ทำเครื่องหมายเป็นคำตอบโดย Laura ZhangMicrosoft, Moderator 18 สิงหาคม 2551 1:29
    14 สิงหาคม 2551 23:04

ตอบทั้งหมด

  • Hi,

    You should be able to take ownership of the key and change the permissions on it. The key should be created at the same level as the full installation.

    Depending on the NIC you are using, the NIC vendor may have a command line tool that you can use to set this.

    Andrew
    12 สิงหาคม 2551 23:16
    เจ้าของ
  • "Administrator" is already the owner. I am logged in as Administrator and it won't let me change any permissions on the key.
    This is a clean install and is like this on all clean installs we've done (no cloning).
    13 สิงหาคม 2551 19:47
  • My guess is that you'd need to use the NIC-specific registry key to set this under:
    HKLM\SYSTEM\CurrentControlSet\Control\Class\GUID\INTNUM\Vendor-specific-registrykey

    I needed to do this for a couple of different registry keys to get 802.1Q VLAN tagging to work. 

    The GUID seems to be different between server to server, but the first part of the GUID is always {4D36E972 so I used the following code to set my parameters:

    @ECHO OFF
    FOR /F "usebackq" %%a IN (`REG query HKEY_LOCAL_MACHINE\SYSTEM\CurrentcontrolSet\Control\Class /f {4D36E972*`) DO CALL :LOOP %%a
    GOTO END

    :LOOP
    IF NOT [%1]==[End] (
     REG ADD %1\0007 /v VlanFiltering /t REG_SZ /d 0 /f
     REG ADD %1\0012 /v VlanID /t REG_SZ /d 1 /f
     )
    EXIT /B
    GOTO END

    :END

    It is not pretty and I still haven't found an automatic way of matching particular interfaces of a dual port card to which number they are expect handrollicly.

    For my on board HP DL 380G5 NIC the setting was *SpeedDuplex, REG_SZ where:
    0=Auto
    1=10 Half
    2=10 Full
    3=100 Half
    4=100 Full
    2164261634=1Gb Full Auto

    Cheers,
    Jeremy.

    • เสนอเป็นคำตอบโดย JeremyHagan 14 สิงหาคม 2551 23:04
    • แก้ไขโดย JeremyHagan 14 สิงหาคม 2551 23:09 Updated
    • ทำเครื่องหมายเป็นคำตอบโดย Laura ZhangMicrosoft, Moderator 18 สิงหาคม 2551 1:29
    14 สิงหาคม 2551 23:04