none
预安装SBS2008的server如何进入迁移安装模式

    问题

  • 准备做SBS2003到SBS2008的迁移

    新买的Server预安装了SBS2008

    请问这个时候如何进入迁移安装模式

    记得有篇文章说在Server第一次启动时,在第一个界面强制重启,如果检测到了了应答文件,就会进入迁移安装模式

     

    2011年5月9日 2:36

答案

  •  

    Got it!
    •        turn on Server and enter into BIOS
    •        in BIOS, disable servers ability to boot from USB or to search USB for bootable partitions
    •        save BIOS changes and exit BIOS, restart
    •        allow system to come up into SBS 2008 OOBE welcome screen (we do this ”only to confirm the SBS 2008 OS is indeed properly pre-installed“) DO NOT PROCEED OR CLICK NEXT!!!
    •        click Cancel at first viewing of OOBE – the machine will shut down
    o        NOTE: clicking Next and/or entering any data what-so-ever into the parameter fields for Server Name, Domain Name, etc… will completely eliminate any chance of providing detailed parameters (such as top level domain name, Server IP address, etc…) DO NOT CLICK NEXT – CLICK CANCEL
    •        acquire a network switch from somewhere, power it up, confirm no other systems are connected to it and connect your SBS NIC to the Switch
    o        NOTE: if you choose a router already on a subnet to connect to, please: (choose a Router that has no DHCP Server enabled on the subnet, possibly a test network)
    o        NOTE: the reason – “an existing DHCP service connected during SBS08 setup will disable DHCP services on the new SBS 2008 installation. This is by design as a precaution to potential DHCP conflicts”
    •        verify connection of the Network Interface to the router (NOTE: single NIC only in the new SBS 2008)
    •        locate your SBS 2008 installation DVD and one USB removable drive
    •        Create an sbsanswerfile using the SBSAfg.exe tool on the SBS 2008 installation DVD
    •        Save the sbsanswerfile.xml to the USB removable media at the root of the drive
    •        Insert USB removable media into SBS 2008 Server and turn power on (remember, you must have disabled USB boot in BIOS or system will try to boot from the USB drive and possibly hang)
    •        with the sbsanswerfile.xml present (SBS 2008 setup is designed to find the sbsanswerfile at the root of any drive in the system) SBS 2008 will continue setup using the SBS Answer File definitions allowing the full range of parameters to be implemented per specific Admin’s intentions
    •        the system will continue installation, reboot as needed, and complete install with full set of “your own defined parameters” which are the sbsanswerfile.xml customizations you create for the environment… 

     
    From: http://wintivity.wigital.net/blog/2009/02/09/small-business-server-2008-installation-guide-links/


    知之为知之,不知为不知
    2011年7月6日 3:45

全部回复

  • 预安装的SBS2008是OEM的,你不能直接从SBS2003迁移过来。你需要:

    1.一张可以用作迁移SBS2008的光盘,打电话给微软确认;

    2.重新安装预装的SBS2008服务器;

    3.按照迁移文档进行迁移。

    另外还有一个问题,你新买的服务器不应该是SBS2008啊,应该是最新版本的SBS2011。


    Best regards,

    Joshua Tu, MCSE/MCSA +Sec
    -----------------------------------------------------------------------------------------
    We hope you get value from the forums platform! -----------------------------------------------------------------------------------------
    This posting is provided "AS IS" with no warranties, and confers no rights.
    Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    • 已建议为答案 Joshua Tu 2011年6月10日 15:56
    2011年6月3日 20:06
  •  

    Got it!
    •        turn on Server and enter into BIOS
    •        in BIOS, disable servers ability to boot from USB or to search USB for bootable partitions
    •        save BIOS changes and exit BIOS, restart
    •        allow system to come up into SBS 2008 OOBE welcome screen (we do this ”only to confirm the SBS 2008 OS is indeed properly pre-installed“) DO NOT PROCEED OR CLICK NEXT!!!
    •        click Cancel at first viewing of OOBE – the machine will shut down
    o        NOTE: clicking Next and/or entering any data what-so-ever into the parameter fields for Server Name, Domain Name, etc… will completely eliminate any chance of providing detailed parameters (such as top level domain name, Server IP address, etc…) DO NOT CLICK NEXT – CLICK CANCEL
    •        acquire a network switch from somewhere, power it up, confirm no other systems are connected to it and connect your SBS NIC to the Switch
    o        NOTE: if you choose a router already on a subnet to connect to, please: (choose a Router that has no DHCP Server enabled on the subnet, possibly a test network)
    o        NOTE: the reason – “an existing DHCP service connected during SBS08 setup will disable DHCP services on the new SBS 2008 installation. This is by design as a precaution to potential DHCP conflicts”
    •        verify connection of the Network Interface to the router (NOTE: single NIC only in the new SBS 2008)
    •        locate your SBS 2008 installation DVD and one USB removable drive
    •        Create an sbsanswerfile using the SBSAfg.exe tool on the SBS 2008 installation DVD
    •        Save the sbsanswerfile.xml to the USB removable media at the root of the drive
    •        Insert USB removable media into SBS 2008 Server and turn power on (remember, you must have disabled USB boot in BIOS or system will try to boot from the USB drive and possibly hang)
    •        with the sbsanswerfile.xml present (SBS 2008 setup is designed to find the sbsanswerfile at the root of any drive in the system) SBS 2008 will continue setup using the SBS Answer File definitions allowing the full range of parameters to be implemented per specific Admin’s intentions
    •        the system will continue installation, reboot as needed, and complete install with full set of “your own defined parameters” which are the sbsanswerfile.xml customizations you create for the environment… 

     
    From: http://wintivity.wigital.net/blog/2009/02/09/small-business-server-2008-installation-guide-links/


    知之为知之,不知为不知
    2011年7月6日 3:45