登录
 
主页技术资源库学习下载支持社区论坛
IT 专业人士的资源 >
> 
> 
scvmm2012 service deploy

Answered scvmm2012 service deploy

  • 2012年7月5日 19:06
     
     
    登录进行投票
    0

    hi guys we have  a scvmm2012 where we set up a service template for 2 tier web server + NLB

    we set up logical networks, mac address pools, load balancers (nlb microsoft) and a vip templates for port 80

    here what we have

    https://skydrive.live.com/#cid=E883A4B81CA9B210&id=E883A4B81CA9B210!691

    https://skydrive.live.com/#cid=E883A4B81CA9B210&id=E883A4B81CA9B210!692

    when I deploy it saves each virtual machine at c:\ directory on each hyper-v host server (that is a hyper-v cluster)

    how can I deploy that vms (web server) to be settle at C:\ClusterStorage\SHV103_Disk_VHD01\Virtual Machines

    WE couldn´t setup our storage at SCVMM2012 because the SMI-s agent failed on it.

    regards,

    Thiago Beier

    Thiago Beier Microsoft Solutions

     

全部回复

  • 2012年7月10日 15:52
    版主
     
     已答复
    登录进行投票
    0

    If you don't mark Your VM as "Highly Available", VMM will try to Place them on local disks during deployment. When you mark Your VM for HA, VMM will Place them on a CSV based on what`s available in the particular cluster.

    You`ll find this option on the hardware settings on Your VMs.

    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

     
  • 2012年7月10日 20:39
     
     
    登录进行投票
    0

    Kristian,
    I am having this same or similar issue: "update placement or determine an appropriate host for this virtual machine and try the operation again" but my VM is not marked as Highly Available. My Hyper-V Servers are clustered but shouldn't I be able to still deploy a non-highly available VM from a Service Template?

    --Robert Shahon

    Robert


    • 已编辑 rsoly777 2012年7月10日 20:59 forgot to add info
    •  
     
  • 2012年7月16日 22:31
     
     
    登录进行投票
    0

    Robert and Kristian, the problem I got was solved thank you so much.

    Now I´m facing with a boring problem were after deploying a 2 tier web farm with nlb

    http://technet.microsoft.com/library/hh335098.aspx

    the vms are deployed ok but the nlb is beeing configured only on the 1st vm

    any ideas?

    regards,

    Thiago Beier
    Microsoft, Antivírus, Firewalls, Virtualization and Storage

    Thiago Beier Microsoft Solutions

     
  • 2012年7月24日 16:26
    版主
     
     已答复
    登录进行投票
    1

    Robert: you should specify available paths for placements on Your hosts prior to this, so that VMM will find an alternative path if the vm is not marked for HA.

    Thiago: did the service deployment fail? If so, can you logon to Your VM and Complete the setup? (add the VM to the NLB cluster), and 'repair' the service deployment?

    All of this relies on network communication (DNS-name) between the VMM server and the VM, so if you cant Reach the VM during deployment, this will fail.

    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

     
  • 2012年7月24日 16:32
     
     已答复
    登录进行投票
    0

    Hi Kristian,

    Looks like the reason this was failing for me is I did not notice the NIC settings in the designer were showing Static IP, once I changed this to Dynamic the Service Template succeeded.

    Thanks!

    Robert

     
  • 2012年8月2日 16:00
     
     
    登录进行投票
    0

    Kristian, the deploy doesn´t fail it complete ok

    and after I can finish the nlb configuration on the other nodes without problems as you can see here https://skydrive.live.com/#cid=E883A4B81CA9B210&id=E883A4B81CA9B210!696

    when you say that i can reach the vm I think it´s possible because the DNS record was created after the VM deployment , right? where´s the error on it´s step?

    Thiago Beier Microsoft Solutions

     
  • 2012年8月3日 23:40
     
     
    登录进行投票
    0

    Hi guys I deployed without error it still doesn't set up the nlb on the other host (vm guest)

    here you can see it http://sdrv.ms/Ma5XWh

    or https://skydrive.live.com/redir?resid=E883A4B81CA9B210!699

    regards,

    Thiago Beier

    Thiago Beier Microsoft Solutions


     
  • 2012年8月12日 9:51
    版主
     
     
    登录进行投票
    0
    unable to open the links you provide, but which load balancer are you using, and have you defined a VIP template, using a dedicated IP from your network fabric as part of the deployment?

    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

     
  • 2012年8月12日 10:52
     
     
    登录进行投票
    0

    I had such a problem, can you then go in and configure it manually on the second?

    I could and I never found a solution that would reliably work, I put it down to something at the switch level possibly. Anyway I went instead and used Citrix Netscalers and they work a treat. they even officer free, small and large versions. took alot of pain out of web server deployment.

    If you still have issues with NLB I would be tempted to open a case as I wasted so many hours trying to get it working for deployment.

    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. http:\\robbieroberts.wordpress.com

     
  • 2012年8月14日 22:19
     
     
    登录进行投票
    0

    Blackuke, I can to on the second and configure it manually, it´s turning me crazy

    I´ve never used the citrix netscalers, but I´ll check it out.

    now I can upload the images, thanks a lot

    Thanks a lot

    Thiago Beier Microsoft Solutions