Read-Only Domain Controllers (RODCs) and the Primary Read-Only Zone
When you promote a Read-Only Domain Controller (RODC) and also select it to be a DNS server, it will perform inbound replication of the DNS Zones (Either stored in the applications or domain NCs) as any Writeable Domain Controller. But if you're familiar with RODC basics you know they never perform outbound replication and the database is mostly read-only (including the DNS records), Windows Server 2008 DNS Introduce a new zone type called the Primary Read-Only Zone. The Administrator of RODC can view contents of DNS but will unable to change it from a RODC.
Read-Only Domain Controllers (RODCs) are not pointing the SOA to them self unlike Writable Domain Controllers
Writable Domain Controllers are always pointing the SOA to them self, because they all host writable copies of Active Directory-Integrated Zones, How ever RODCs doesn't host writable copies of those and therefore points the SOA to an Writable Domain Controller using the following SOA selection model.
Note: The current SOA target DC is maintained separately for each zone and re-selected every 20 minutes (not configurable). The selection algorithm contains a random component to try to spread load between writable domain controllers.
 Needs a clarification to another difference, RODCs doesn't register NS records, so it makes  safe from picking any RODC.
DNS Updates for clients having a Read-Only Domain Controller (RODC) as preferred DNS server
When a client attempts a dynamic update, it sends SOA query to its preferred DNS server. Typically, clients are configured to use the DNS server in their branch site as their preferred DNS server. The RODC should read its SOA record and at best effort return a writable Windows Server 2008 domain controller to the client (Using the SOA selection model above), the RODC waits a certain amount of time, as explained below, and then it attempts to replicate the updated DNS record object in Active Directory from the DNS server that it referred the client to through an RSO operation back to the RODC, an RSO operation is an operational attribute named replicateSingleObject that has existed in Active Directory since Windows 2000 and allows replication of a single object by using a LDAP modify operation of the replicateSingleObject attribute, However the replicateSingleObject has been updated in Windows Server 2008 to support replication of secrets to RODCs, More information about the attribute and it's syntax can be found here: http://msdn.microsoft.com/en-us/library/cc223306(PROT.13).aspx
How Read-Only Domain Controllers perform RSO operations of DNS record updates
For the DNS server on the RODC to perform an RSO operation of the DNS record update, a DNS server that runs Windows Server 2008 must host writeable copies of the zone that contains the record. That Windows Server 2008 DNS server must register a name server (NS) resource record for the zone, with other words  must be used in the SOA selection model above.
Note: The Windows Server 2003 Branch Office Guide recommended restricting name server (NS) record registration to a subset of the available DNS servers. If you followed those guidelines and you do not register at least one writable Windows Server 2008 DNS server as a name server for the zone, the DNS server on the RODC attempts to perform the RSO operation with a DNS server that runs Windows Server 2003 using  in the SOA selection model. That operation fails and generates a 4015 Error in the DNS event log of the RODC, and replication of the DNS record update will be delayed until the next scheduled replication cycle and RSO operation cannot be made by the RODC DNS against a Windows Server 2003 Domain Controller.
More specifically how the RSO operation really works, the SOA query triggers the DNS server on the RODC to put an entry in remotePollList, which is an internal queue on each DNS server. The entry includes the following:
The time stamp is set to a time in the future that is equal to the current time plus a replication delay. The replication delay is controlled by a registry setting named DsRemoteReplicationDelay. By default, the value of this setting is 30 seconds.
The internal queue (remotePollList) is processed at regular intervals. The queue-processing interval is controlled by a registry setting named DSPollingInterval. By default, the value of the interval is three minutes.
When the DNS server processes the queue, it attempts to replicate only objects whose time stamp is less than current time. Therefore, the delay between the time that the RODC refers the client to an authoritative DNS server and then attempts to replicate in is determined by the following:
If you use the default values for the registry settings, the amount of time before the RODC attempts to replicate the DNS update is a minimum of 30 seconds and a maximum of 210 seconds.
You can modify the values of these registry settings to reduce the amount of time before the RODC attempts to replicate the DNS update. The minimum value for the DsRemoteReplicationDelay setting is 5 seconds. The minimum value for the DSPollingInterval setting is 30 seconds. If you use the minimum values, the amount of time before the RODC attempts to replicate the DNS update is a minimum of 5 seconds and a maximum of 35 seconds.
Note: Max number of RSO requests per 5 minutes cycle is 300 to prevent Denial of Service attacks
Note: DsPollingInterval controls all Active Directory polling, not just RODC RSO handling. If you change this value, be aware that this change will affect more than just RODC RSO operations. For example, this setting will affect how often the DNS server polls Active Directory for new or updated resource records or DNS zones.
The following table lists some additional registry entries that are related to the RSO operations that are performed for DNS updates on an RODC. These registry entries are stored in the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DNS\Parameters
Either True or False
To modify any of the registry entries that are related to the RSO operations for DNS updates on an RODC, use the Dnscmd.exe command-line tool to set the appropriate parameter.
Example: "dnscmd <server>.<domain>.<com> /Config /DsRemoteReplicationDelay 10"
Good article Chris!