System Center 2012 – Virtual Machine Manager (VMM) Error Codes [3500-3999]

System Center 2012 – Virtual Machine Manager (VMM) Error Codes [3500-3999]

Use Ctrl-F to find a specific code.

Some codes have a recommended action using PowerShell as well as the general action.

Links to other error code pages can be found at System Center 2012 – Virtual Machine Manager (VMM) Error Codes.

 

If you have additional information about an error, please add it to the "Additional Troubleshooting Information" column.

 

Code

Message

Recommended Action (in product)

Additional Troubleshooting Information

3500

Virtual Server host is unavailable.

BLANK

3501

There is not enough disk space on the available volumes.\nMaximum disk space on t he most appropriate volume, accounting for the host resource utilization (in megabytes): %BinaryDiskSpaceAvailable; \n The virtual machine requirement (in megabytes): %PlacementRequestValue; \nThe maximum available space at the time of evaluation, after considering the virtual machine requirements (in megabytes): %PlacementCapacityValue;

BLANK

3502

There is not enough disk space on the available volumes due to disk reserves.\nMaximum disk space on the most appropriate volume, accounting for the host resource utilization and reserves (in megabyte s): %BinaryDiskSpaceAvailable;\nThe virtual machine requires (in megabytes): %PlacementRequestValue;\nThe maximum space at the time of evaluation, after considering the virtual machine requirements (in megabytes): %PlacementCapacityValue;

BLANK

3503

Not enough memory available. Total memory on the host is %MemorySize; MB. Accounting for reserves, remaining memory for use by existing and new virtual machines is %MemorySizeAfterReserves; MB. At the time of evaluation, the remaining memory was %PlacementCapacityValue; MB and the amount requested by this virtual mach ine was %PlacementRequestValue; MB.

BLANK

3504

Not enough memory available due to the host reserve at level: %ReserveLevel;. Tot al memory at this reserve level for use by existing and new virtual machines is %MemorySize; MB. At the time of evaluat ion, the remaining memory was %PlacementCapacityValue; MB and the amount requested by this virtual machine was %PlacementRequestValue; MB.

BLANK

3505

The projected CPU utilization exceeds the CPU utilization of %PercentageReserve;% % specified at host reserve level: %ReserveLevel;.

BLANK

3506

The projected network utilization percentage (%Percentage;%% of %LinkSpeed; Mbps) exceeds the reserved network capacity percentage (%PercentageReserve;%%).

BLANK

3507

Not enough performance data.

BLANK

3508

Duplicate virtual machine name %VirtualMachineName; was discovered.

BLANK

3509

ID %ProcessorTypeGuid; is not found in the list of supported processors.

Ensure that the processor ID is valid and then try the operation again.

3510

There is insufficient disk space on the volume %VolumeDriveLetter; to complete pl acement of the virtual machine.

Free %BinaryDiskSpaceRequired; of disk space on the volume %VolumeDriveLetter;, or choose a different volume to continue with the placement.

3511

The path %PathName; exceeds the maximum allowed length by %DiffFromMaxLimit; char acters.

The maximum length allowed in a path is %MaxLimit; characters. Enter a shorter path, and then try the operation again.

3512

The projected disk I/O utilization (IOPS) %ProjectedIOPS; exceeds the maximum dis k I/O utilization (IOPS) of %MaximumIOPS;.

BLANK

3513

Unable to set the value for %Parameter;. The sum of all elements exceeds the maxi mum length of %MaxLength;.

Choose a different value below the maximum length, and then try the operation again.

3514

Unable to connect to the Virtual Server service on the library server %ServerName ;.

Ensure that the Virtual Server service is installed and running on the library server.

3515

Issues were identified while evaluating virtual machine placement.

3516

The specified virtual network adapter configuration is not supported by the host virtualization software.

Update the virtual network adapter configuration and then try the operation again.

3517

Unable to save the virtual machine configuration files because volume %VolumeDriveLetter; is marked as unavailable for placement.

Select a different save path for this virtual machine and then try the operation again.

3518

The VLAN setting for one or more network adapters on the virtual machine (%VMName ;) is not compatible with the virtualization software on the virtualization host (%VMHostName;).

Ensure that virtual LAN identification is disabled for all network adapters listed in the hardware configuration of the virtual machine (%VMName;) or specify a different host, and then try the operation again.

3519

Issues were identified while evaluating physical system placement.

3520

The virtual machine (%VMName;) violates the maximum memory limit for the virtualization host (%VMHostName;).\nMaximum memory: %ParameterValue;

3521

No network interface card could be identified that meets all requirements.

3522

Network bandwidth on the virtualization host (%VMHostName;) is not sufficient for all network workloads.

3523

Network bandwidth on the virtualization host (%VMHostName;) is not sufficient to satisfy the reserve level for all network workloads.

3525

No connected IP address pool with remaining IPv4 addresses could be identified to supply an address for the network adapter.\nNetwork adapter ID: %ParameterName;

3526

No connected MAC address pool with remaining addresses could be identified to supply an address for the network adapter.\nNetwork adapter ID: %ParameterName;

3527

No connected virtual IP (VIP) address pool with sufficient remaining addresses could be identified for the virtual machines in this tier.

3528

There are no enough network interface cards to satisfy the number required by the physical system.

3529

No connected storage device could be identified that satisfies all requirements.

Sort by: Published Date | Most Recent | Most Useful
Comments
  • hello, how to resolve the below error.  i've not yet created single VM from SCVMM.  My ESX Host has 24GB free, but SCVMM  2012 shows 0!!!  why?  How to resolve this?

    3503

    Not enough memory available. Total memory on the host is %MemorySize; MB. Accounting for reserves, remaining memory for use by existing and new virtual machines is %MemorySizeAfterReserves; MB. At the time of evaluation, the remaining memory was %PlacementCapacityValue; MB and the amount requested by this virtual mach ine was %PlacementRequestValue; MB.

    BLANK

Page 1 of 1 (1 items)