locked
OCS with NET gateway RRS feed

  • Question

  • Dear all;

    we have ocs 2007 r2  FE server and edge server. we also have mediation server.
    we have NET vx 1200 gateway.
    i need to test the gateway interaction with OCS 2007.
    how can i test the integration without connect the gateway directly to our PSTN connection.
    can i connect the gateway to analog line ( phone ) ??
    i need to test functionality internaly( ring from OCS client to PBX phone.

    i appreciate your help
    Monday, July 27, 2009 10:53 AM

All replies

  • I suggest you contact NET Support as you'll need to find out what connection options that box supports: http://www.net.com/Pages/ContactUs.aspx?pgid=75#Service_Support.  I have only configured the VX1200 using a T1 connection to other PBX gateways (e.g. Cisco 2800).

    You may want to try just configuring the box as desired without connecting the link and then attempt to make outbound calls from OCS.  Enabled logging on the VX to look at the SIP traffic to verify that it appears as expected and with the desired number patterns.  Enter 'enable' mode from the command line on the VX device and then enter "trace all level info 0" to watch all SIP traffic.  Then use "trace no" to turn it back off.
    Jeff Schertz, PointBridge | MVP | MCITP: Enterprise Messaging | MCTS: OCS
    Monday, July 27, 2009 12:54 PM
    Moderator
  • If your VX is licensed for it you could configure a sip phone (like SJPhone) to register to the VX and test call flow between your sip endpoint and OCS. It's added complexity but would allow you to verify the VX is properly talking to OCS.
    Saturday, August 29, 2009 7:39 AM
  • Hi Alisa,

    check this guide for configuring your NET vx 1200: http://www.net.com/Product%20Literature/MicrosoftUC/VX_UC_QSG_4_4_4.pdf

    Thanks
    Anesh| http://christopheranesh.blogspot.com/
    Friday, September 18, 2009 12:18 PM