Benutzer mit den meisten Antworten
HILFE : KERNEL_MODE_EXCEPTION_NOT_HANDLED_M

Frage
-
Hallo Experten
Ich hoffe Ihr könnt mir bei meinem großen Problem helfen ...
also folgendes :
Während ich mit dem pc arbeite und Internet Radio höhere passiert es in unregelmäßigen Abständen das meine boxen ein kurzes merkwürdiges Geräusch machen und dann das Bild einfriert.
Ich komme nur dazu das Problem zu beheben, wenn ich den reset Knopf drücke. Danach fährt der PC ganz normal wieder hoch . ich habe mit Hilfe des Programmes WhoCrashed entdeckt das ein Treiber nicht ok. ist, hier die Fehler MeldungMeine PC
Betriebssystem Microsoft Windows 7 Home Premium 32 Bit
CPU Typ TripleCore AMD Athlon II X3 445, 3062 MHz
Motherboard Name Asus M4N68T-M LE
Arbeitsspeicher 2048 MB (DDR3-1333 DDR3 SDRAM)
Pc ist Neu .
pc eingeliefert mit windows 7 enterprise, jetzt Windows 7 Home Premium 32 Bit
Crash Dump Analysis
Crash dump directory: C:\Windows\Minidump
On Fri 26.11.2010 08:41:37 GMT your computer crashed
crash dump file: C:\Windows\Minidump\112610-61979-01.dmp
This was probably caused by the following module: hdaudbus.sys (HDAudBus+0xDD16)
Bugcheck code: 0x1000008E (0xFFFFFFFF80000003, 0xFFFFFFFF9929CD15, 0xFFFFFFFF8B11CAB8, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\drivers\hdaudbus.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: High Definition Audio Bus Driver
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.On Fri 26.11.2010 08:41:37 GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: hdaudbus.sys (HDAudBus+0xD963)
Bugcheck code: 0x8E (0xFFFFFFFF80000003, 0xFFFFFFFF9929CD15, 0xFFFFFFFF8B11CAB8, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\drivers\hdaudbus.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: High Definition Audio Bus Driver
Bug check description: This bug check indicates that a kernel-mode application generated an exception that the error handler did not catch.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.
Leider ich kann nicht viel damit anfangen und ich wäre dankbar für jede Hilfe und rat
Sonntag, 28. November 2010 21:08
Antworten
-
Hallo Andre
zu erst wünsche ich dir Frohe Weihnachten und einen guten Rutsch ins neue Jahr.
Nach eine Anfrage bei Asus habe diese Antwort gekriegt
(Sehr geehrter Kunde,
tut uns leid, bei diesem Mainboard besteht nicht die Möglichkeit, die Command Rate abzuändern. Da können wir nur mitgeben, bitte freigegebene Module nutzen.)ich habe den Händler kontaktieren und eine tauschaktion vereinbaren wegen speicher
neuer riegel ist angekommen von kingston und eingebaut, neue Bios ist installiert .
seit ca. 20 Stunden läuft meine Kiste stabil.ich melde mich wieder zu berichten
mfg nappy
- Als Antwort vorgeschlagen Andre.Ziegler Samstag, 25. Dezember 2010 19:38
- Als Antwort markiert Andrei Talmaciu Montag, 3. Januar 2011 10:31
Freitag, 24. Dezember 2010 21:24
Alle Antworten
-
Guten morgen @andre
treiber habe ich installiert direkt von Asus den hier (VIA_Audio_V6017900_XpVistaWin7)
aber in GM sind zwei treiber:
1)ATI HDMI Audio Realtek Semiconductor Corp.treiber version 6.0.1.6121
2)Via High Definition Audio, VIA Technologies, Inc. treiber version 6.0.1.8700denn eine habe ich ersetzt soll ich den von Realtek auch ersetzen ???
mfg nappy
Mittwoch, 1. Dezember 2010 11:37 -
Hallo andre finde leider keine HDMI treiber bei AMD
meine Grafikkarte ATI Radeon HD 3400 Series (256 MB)
(Soundkarte VIA VT1708S @ nVIDIA nForce 7025-630a (MCP68SE) - High Definition Audio Controller)
bei Realtek Habe für ATI HDMI das gefunden
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false
ich Hoffe es ist der richtige
kannst du bitte eine blick werfen ??
mfg nappy
Mittwoch, 1. Dezember 2010 23:26 -
hallo Andre
in GM ist noch der alte (ATI HDMI Audio Realtek Semiconductor Corp.treiber version 6.0.1.6121)
der neuer ist Realtek HD Audio R2.49
im moment läuft stabil mit der alte treiber ohne Abstürze
ich beobachte das ganze und wenn es wieder passiert installiere den neuer und melde mich wieder.
oder was meinst du ????
mfg nappy
Donnerstag, 2. Dezember 2010 22:00 -
Hallo Andre
Hier das Crash dump file
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\112610-61979-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: ?srv*c:\websymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Windows 7 Kernel Version 7600 MP (3 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0x82a18000 PsLoadedModuleList = 0x82b60810
Debug session time: Fri Nov 26 09:41:37.309 2010 (UTC + 1:00)
System Uptime: 0 days 0:18:59.869
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Loading Kernel Symbols
...............................................................
................................................................
.............................
Loading User Symbols
Loading unloaded module list
....
Unable to load image \SystemRoot\system32\DRIVERS\HDAudBus.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for HDAudBus.sys
*** ERROR: Module load completed but symbols could not be loaded for HDAudBus.sys
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000008E, {80000003, 9929cd15, 8b11cab8, 0}
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
Probably caused by : hardware ( HDAudBus+dd15 )
Followup: MachineOwner
---------
und hier mit Bluescreen ViewDump File : 112610-61979-01.dmp
Crash Time : 26.11.2010 09:43:59
Bug Check String : KERNEL_MODE_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x1000008e
Parameter 1 : 0x80000003
Parameter 2 : 0x9929cd15
Parameter 3 : 0x8b11cab8
Parameter 4 : 0x00000000
Caused By Driver : HDAudBus.sys
Caused By Address : HDAudBus.sys+dd16
File Description : High Definition Audio Bus Driver
Product Name : Microsoft® Windows® Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor : 32-bit
Computer Name :
Full Path : C:\Windows\Minidump\112610-61979-01.dmp
Processors Count : 3
Major Version : 15
Minor Version : 7600
==================================================
mfg nappyFreitag, 3. Dezember 2010 23:33 -
gib mir bitte die dmp Dateien, kein WinDbg output.
Probably caused by : hardware
Das verwirrt etwas. Könnte eine defekte Soundkarte sein.
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
bitte installiere auch alle Updates.
"A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/Samstag, 4. Dezember 2010 00:28 -
Hallo Andre
Updates.auf neusten stand Soundkart ist on board ???
wie komme ich auf dmp datei ? ich habe extra das Debugger programm instaliert um das auszulesen.
und das ist das einzige dmp datei, oder gibtes eine andere ???
wenn du möchtest kann ich dir diese datei schicken per pm
Samstag, 4. Dezember 2010 17:06 -
wenn du möchtest kann ich dir diese datei schicken per pm
André
[1] http://social.answers.microsoft.com/Forums/de-DE/w7networkde/thread/af6c55f1-0e82-460e-babb-794ff26e5698
"A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/Samstag, 4. Dezember 2010 19:54 -
KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)
EXCEPTION_CODE: (HRESULT) 0x80000003 (2147483651) - Mindestens ein Argument ist ung ltig.
STACK_TEXT:
HDAudBus!__security_check_cookie +0xc
HDAudBus!HDABusWmiLogETW+0x1d3
HDAudBus!HdaController::Isr+0x2b
nt!KiChainedDispatch2ndLvl+0x60
nt!KiChainedDispatch+0x29
amdppm!C1Halt+0x4
nt!PoIdle+0x538
nt!KiIdleLoop+0xdDu hast ein RAM Problem. Entweder ein Defekt oder eine Inkompatibilität zu deinem ASUS Board.
BiosVersion = 0801
BiosReleaseDate = 04/30/2010
BaseBoardManufacturer = ASUSTeK Computer INC.
BaseBoardProduct = M4N68T-M LE
BaseBoardVersion = Rev X.0x
Passt der RAM zum Board? Ist er von ASUS getestest? Mit welchen Timings lässt du den RAM laufen.
"A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/Sonntag, 5. Dezember 2010 14:12 -
Bei dem Bericht von BlueScreenView ist der ganze Bericht ein bisschen ausführlicher.
die 5 Dateien sind rot markiert und postieren nach den fehler. ich kann mir vorstellen dass das mit den Fehlern zutun hat.
ich poste das bei SkyDrive
http://cid-b8708c116a21b565.office.live.com/self.aspx/Neuer%20Ordner/BlueSCreenView.7z
Sonntag, 5. Dezember 2010 15:34 -
was meinst du mit Timings ?
"A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/Sonntag, 5. Dezember 2010 19:26 -
mit everest
Speicher Timings 9-9-9-24 (CL-RCD-RP-RAS)
Command Rate (CR) 1T
DIMM1: 2 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)
mit CPU-Z ich poste das bei SkyDrive
https://cid-b8708c116a21b565.office.live.com/self.aspx/Neuer%20Ordner%20%5E52%5E6/cpu-z.7z
Sonntag, 5. Dezember 2010 20:41 -
ok, dann haben wir wohl den Grund. CR 1T ist wohl zu viel für den RAM. Ändere den Wert auf 2T.
"A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/- Als Antwort vorgeschlagen Andre.Ziegler Samstag, 25. Dezember 2010 19:38
Montag, 6. Dezember 2010 14:05 -
Hallo Andre
drei tage bin auf die suche nach diese command rate
In Matherboaqrd Buch gibt es nicht, Google war nicht so Informativ
Ich bin in eine englisch sprechende Forum gestoßen und habe gelesen das diese Funktion gibt es nicht für diese Board
bei eine Anfrage direkt bei Asus die sind ignoriert worden
ich bin fertig mit meine latinisch Falls Du doch noch eine Idee hast , bin ich ganz Ohr
Freitag, 10. Dezember 2010 14:42 -
Hallo Andre
zu erst wünsche ich dir Frohe Weihnachten und einen guten Rutsch ins neue Jahr.
Nach eine Anfrage bei Asus habe diese Antwort gekriegt
(Sehr geehrter Kunde,
tut uns leid, bei diesem Mainboard besteht nicht die Möglichkeit, die Command Rate abzuändern. Da können wir nur mitgeben, bitte freigegebene Module nutzen.)ich habe den Händler kontaktieren und eine tauschaktion vereinbaren wegen speicher
neuer riegel ist angekommen von kingston und eingebaut, neue Bios ist installiert .
seit ca. 20 Stunden läuft meine Kiste stabil.ich melde mich wieder zu berichten
mfg nappy
- Als Antwort vorgeschlagen Andre.Ziegler Samstag, 25. Dezember 2010 19:38
- Als Antwort markiert Andrei Talmaciu Montag, 3. Januar 2011 10:31
Freitag, 24. Dezember 2010 21:24 -
neuer riegel ist angekommen von kingston und eingebaut, neue Bios ist installiert .
seit ca. 20 Stunden läuft meine Kiste stabil.Hallo,
dir ebenfalls ein frohes Fest :)
danke für die Rückmeldung wegen dem RAM. Schön, dass es nun geht.
Gruß
André
"A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/Samstag, 25. Dezember 2010 13:24