none
SCOM 2012 R2 Network Management Discovery Rule Error

    Question

  • Hi,

    I'm doing a recursive discovery of Dell Dracs.  When I use 122.14.17.<1-220> or 122.14.17.* an error occurs stating the following:

    The configuration specified for Module DS is not valid.

    :Schema validation failed.

    The seedIPOrName element is invalid - The value "122.14.17.<1-220> is invalid according to its datatype 'NmToken' - The '<' character, hexadecimal value is 0x3c, cannot be included in a name.

    ========================================I am using Recursive Discovery and at the Include Filters page, selecting Discover only network devices within the specific IP address ranges and type IP address range like above, but the error still occurs.

    Any ideas?

    Thx,

    John Bradshaw

    PS....If I add individual IP's under Explicit discovery, I have no problems.


    • Edited by bradje Thursday, January 02, 2014 9:54 PM
    Thursday, January 02, 2014 9:53 PM

Answers

  • You should include the IP address range, 122.14.17.<1-220> or 122.14.17.* , in include filter page. Make sue that device name in the specify device page should not use IP address range.

    Roger


    • Edited by System Center guy Friday, January 03, 2014 2:04 AM
    • Marked as answer by bradje Monday, January 06, 2014 7:46 PM
    Friday, January 03, 2014 1:56 AM

All replies

  • You should include the IP address range, 122.14.17.<1-220> or 122.14.17.* , in include filter page. Make sue that device name in the specify device page should not use IP address range.

    Roger


    • Edited by System Center guy Friday, January 03, 2014 2:04 AM
    • Marked as answer by bradje Monday, January 06, 2014 7:46 PM
    Friday, January 03, 2014 1:56 AM
  • Thx Roger.

    I would never have figured out NOT to put the IP range in to the Specify Devices page.

    JB

    Monday, January 06, 2014 7:46 PM