locked
BSOD code 1a RRS feed

  • Question

  • Memory management 1a

    heres the link to the dump files

    https://skydrive.live.com/redir?resid=7B00A1F093A7380A!1083

    Thursday, August 1, 2013 4:24 AM

Answers

  • These crashes were caused by memory corruption (probably a driver).  Please run these two tests to verify your memory and find which driver is causing the problem.  

    Dont forget to upload any further DMP files (especially those when verifier is running)

    If you are overclocking anything reset to default before running these tests.
    In other words STOP!!!   If you dont know what this means you probably arent

    1-Memtest.
    Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Get it here
    Boot from the CD, and leave it running for at least 5 or 6 passes.
    Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.
    Test the sticks individually, and if you find a good one, test it in all slots.

    Any errors are indicative of a memory problem.
    If a known good stick fails in a motherboard slot it is probably the slot.


    2-Driver verifier

    Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is.

    But sometimes it'll crash and won't tell you the driver.
    Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.
    I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise.
    Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

    Here is the procedure:

    Go to Start and type in "verifier" (without the quotes) and press Enter
    Select "Create custom settings (for code developers)" and click "Next" (or  Type "verifier /standard /all"  (no quotes) if you want to verify all of them (this will slow your computer down))
    Select "Select individual settings from a full list" and click "Next"
    Select everything EXCEPT FOR "Low Resource Simulation" and for win 8 dont check Concurrency stress test, and DDI compliance checking click "Next"
    Select "Select driver names from a list" and click "Next"
    Then select all drivers NOT provided by Microsoft and click "Next"
    Select "Finish" on the next page.
    Reboot the system and wait for it to crash to the Blue Screen.
    Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.
    If you can't get into Windows because it crashes too soon, try it in Safe Mode.
    If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

    Further Reading
    http://support.microsoft.com/kb/244617

    About Driver Verifier
    Driver Verifer informationdriver verifier Windows Vista - Microsoft Search
    Driver Verifier issues within Vista/ Windows 7http://support.microsoft.com..default.aspx?+verifier1&res=20
    Driver Verifier Special Pool Featurehttp://support.microsoft.com/kb/188831


    Probably caused by : memory_corruption ( nt!MiRelinkStandbyPage+c6 )
    MEMORY_MANAGEMENT (1a)

            

    Advice offered in good faith. It is your decision to implement same. Dyami & Wanikiya, Team ZigZag.


    • Edited by ZigZag3143x Thursday, August 1, 2013 4:34 AM Clarity
    • Proposed as answer by ZigZag3143x Thursday, August 1, 2013 5:17 AM
    • Marked as answer by Niki Han Tuesday, August 13, 2013 9:37 AM
    Thursday, August 1, 2013 4:33 AM

All replies

  • These crashes were caused by memory corruption (probably a driver).  Please run these two tests to verify your memory and find which driver is causing the problem.  

    Dont forget to upload any further DMP files (especially those when verifier is running)

    If you are overclocking anything reset to default before running these tests.
    In other words STOP!!!   If you dont know what this means you probably arent

    1-Memtest.
    Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Get it here
    Boot from the CD, and leave it running for at least 5 or 6 passes.
    Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.
    Test the sticks individually, and if you find a good one, test it in all slots.

    Any errors are indicative of a memory problem.
    If a known good stick fails in a motherboard slot it is probably the slot.


    2-Driver verifier

    Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is.

    But sometimes it'll crash and won't tell you the driver.
    Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.
    I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise.
    Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

    Here is the procedure:

    Go to Start and type in "verifier" (without the quotes) and press Enter
    Select "Create custom settings (for code developers)" and click "Next" (or  Type "verifier /standard /all"  (no quotes) if you want to verify all of them (this will slow your computer down))
    Select "Select individual settings from a full list" and click "Next"
    Select everything EXCEPT FOR "Low Resource Simulation" and for win 8 dont check Concurrency stress test, and DDI compliance checking click "Next"
    Select "Select driver names from a list" and click "Next"
    Then select all drivers NOT provided by Microsoft and click "Next"
    Select "Finish" on the next page.
    Reboot the system and wait for it to crash to the Blue Screen.
    Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.
    If you can't get into Windows because it crashes too soon, try it in Safe Mode.
    If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

    Further Reading
    http://support.microsoft.com/kb/244617

    About Driver Verifier
    Driver Verifer informationdriver verifier Windows Vista - Microsoft Search
    Driver Verifier issues within Vista/ Windows 7http://support.microsoft.com..default.aspx?+verifier1&res=20
    Driver Verifier Special Pool Featurehttp://support.microsoft.com/kb/188831


    Probably caused by : memory_corruption ( nt!MiRelinkStandbyPage+c6 )
    MEMORY_MANAGEMENT (1a)

            

    Advice offered in good faith. It is your decision to implement same. Dyami & Wanikiya, Team ZigZag.


    • Edited by ZigZag3143x Thursday, August 1, 2013 4:34 AM Clarity
    • Proposed as answer by ZigZag3143x Thursday, August 1, 2013 5:17 AM
    • Marked as answer by Niki Han Tuesday, August 13, 2013 9:37 AM
    Thursday, August 1, 2013 4:33 AM
  • Hi,

    I suggest you  update all the drivers.
    http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly 

    You can also download drivers from the manufacturer’s website and install on your computer.

    If you are still facing the issue, please test the issue in clean boot :
     
    How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista
    http://support.microsoft.com/kb/929135

    You may refer to:
    Resolving stop (blue screen) errors in Windows 7
    http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

    Thanks!

    • Marked as answer by Niki Han Tuesday, August 13, 2013 9:37 AM
    • Unmarked as answer by Cloud_TS Friday, August 16, 2013 2:14 AM
    Friday, August 2, 2013 4:49 AM