locked
Hardware issue from HP DL 380 RRS feed

  • Question

  • Hello,

    Slot 0 HP Smart Array P410i Controller

    1783-Slot 0 Drive Array Controller Failure!

    This is on an HP DL380 where should I look to locate this alert in SCOM?

    I have HP StorageWorks MP, HP BladeSystem MP, HP Servers Core MP

    Thanks,
    DOm


    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

    Thursday, March 29, 2012 7:20 PM

Answers

  • Next to first checking the health state and of course checking the mps imported, also check if there are HP management agent(s) installed on that system. Stuff which comes from the hp support pack for instance contains these agents, which provide more info. info will be more meaningfull from that point.

    Bob Cornelissen - BICTT (My Blog about SCOM) - MVP 2012 and Microsoft Community Contributor 2011 Recipient

    • Marked as answer by Felyjos Monday, April 2, 2012 5:43 PM
    Friday, March 30, 2012 4:30 PM
  • Hi Dom

    Is this still an issue? To sum up the thread:

    - make sure you have the HP Management Packs installed.

    - check health state rather than look for an alert

    Let us know if you have any other questions.

    Cheers

    Graham


    Regards Graham New System Center 2012 Blog! - http://www.systemcentersolutions.co.uk
    View OpsMgr tips and tricks at http://systemcentersolutions.wordpress.com/

    • Marked as answer by Felyjos Monday, April 2, 2012 5:43 PM
    Sunday, April 1, 2012 5:51 PM

All replies

  • Hi,

    Have you imported the HP Proliant MP?

    https://h20392.www2.hp.com/portal/swdepot/displayProductsList.do?groupName=HP+Server+integrations+with+Microsoft+System+Center+products


    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

    Friday, March 30, 2012 5:49 AM
  • A significant amount of monitors for the HP Management Pack for SCOM are set not to alert so you may have to look at the state views to see the health rather than look for an alert. I quite like this approach as it means you can import the pack - see what is unhealthy and fix it without being overrun with alerts. You can then look to enable alerting (via overrides) for those items that you want to.

    Cheers

    Graham


    Regards Graham New System Center 2012 Blog! - http://www.systemcentersolutions.co.uk
    View OpsMgr tips and tricks at http://systemcentersolutions.wordpress.com/

    Friday, March 30, 2012 6:27 AM
  • Next to first checking the health state and of course checking the mps imported, also check if there are HP management agent(s) installed on that system. Stuff which comes from the hp support pack for instance contains these agents, which provide more info. info will be more meaningfull from that point.

    Bob Cornelissen - BICTT (My Blog about SCOM) - MVP 2012 and Microsoft Community Contributor 2011 Recipient

    • Marked as answer by Felyjos Monday, April 2, 2012 5:43 PM
    Friday, March 30, 2012 4:30 PM
  • Hi Dom

    Is this still an issue? To sum up the thread:

    - make sure you have the HP Management Packs installed.

    - check health state rather than look for an alert

    Let us know if you have any other questions.

    Cheers

    Graham


    Regards Graham New System Center 2012 Blog! - http://www.systemcentersolutions.co.uk
    View OpsMgr tips and tricks at http://systemcentersolutions.wordpress.com/

    • Marked as answer by Felyjos Monday, April 2, 2012 5:43 PM
    Sunday, April 1, 2012 5:51 PM
  • Hi,

    Yes HP Proliant is already in place

    Thanks,

    DOm


    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

    Monday, April 2, 2012 5:22 PM
  • A significant amount of monitors for the HP Management Pack for SCOM are set not to alert so you may have to look at the state views to see the health rather than look for an alert. I quite like this approach as it means you can import the pack - see what is unhealthy and fix it without being overrun with alerts. You can then look to enable alerting (via overrides) for those items that you want to.

    Cheers

    Graham


    Regards Graham New System Center 2012 Blog! - http://www.systemcentersolutions.co.uk
    View OpsMgr tips and tricks at http://systemcentersolutions.wordpress.com/

    The approach is okay when there is enough resource allocated to watch the views (: I prefer the alert as at least I get the information selected already... in my mailbox.

    Thanks,
    Dom


    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

    Monday, April 2, 2012 5:31 PM
  • Hi Graham,

    I Have the MP in place and I am checking the Health on the state views inside the MP but I think the "HP" columns (HP Proliant Server, HP Proliant ML Servers, etc...) are not sortable... I will create a custom view to get only the servers with issue in it...

    Closed alerts were also included,. sorry my mistakes I have only 7 alerts

    Thanks,
    Dom


    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager


    • Edited by Felyjos Monday, April 2, 2012 6:25 PM
    Monday, April 2, 2012 5:43 PM
  • after correction I have only one alert pending :)

    Thanks,

    Dom


    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

    Monday, April 2, 2012 6:51 PM