Non Split Tunneling not working RRS feed

  • Question

  • Hi

    I Hope someone can possibly help:

    Basically when we setup network connector and configure it for split tunneling, this allows our remote client to access the Corporate network without any problem, however when we set it up for non split tunneling, the remote client picks up an IP address from UAG but cannot access anything at all.

    Our setup is as follow:

    We have two UAG box with the latest updates in an array sitting behind a checkpoint R65 firewall.  The external Interface on the firewall is connected to the internet with a public IP address.  UAG external interface is configured with a private IP range which the firewall NATs to a public IP address.  The internal UAG interface is configured with the corporate IP range.


    Friday, February 11, 2011 3:39 PM


  • Hi Anh,

    This is a simple one but many gurus do not know the answer.

    Simply edit the network connector. Then go to server settings and you'll see the following text on the argument

    -srv %localip%:%localport% -egap {External IP}

    instead of {External IP} key in your public IP. eg: 92.124.xxx.xxx

    Activate and there you go.


    UAG Expert

    • Marked as answer by Erez Benari Wednesday, May 11, 2011 9:24 PM
    Friday, February 25, 2011 5:12 PM