locked
Windows Experience Index could not be computed RRS feed

  • Question

  • My computer can't rate. when i rated, it stopped in the middle of rating. it says: Windows Experience Index could not be computed, could not measure video playback performance. specs: GA-X58A-UD7, VGA Gigabyte ATI radeon HD5870, windows 7 ultimate 64 bit, i7-950.

    Sunday, December 26, 2010 11:19 AM

Answers

  • yes. The 5770 support 3D, too. This card is still very well to play games. Maybe your card is damaged. Do you still have warranty?

    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
    • Marked as answer by Kevin Hendarto Wednesday, January 5, 2011 1:17 AM
    Thursday, December 30, 2010 11:56 AM

All replies

  • Hi,

    please open the file "C:\Windows\Performance\WinSAT\winsat.log" and look for errors. Which error do you see? If you have a video codec pack installed, remove it.

    regards
    André
    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
    Sunday, December 26, 2010 1:18 PM
  • there's no winsat.log. there are winsat(text document,windows media file) , winsatencode, winsat.prx, ShaderCache, Clip, Data store
    Monday, December 27, 2010 3:04 AM
  • oo. i've got the log. but it can't be written here. may i have your email?? may i send it to your email?
    Monday, December 27, 2010 4:01 AM
  • 304935 (3516) - winsat\logging.cpp:0815: --- START 2010\12\22 23:43:24 PM ---
    304950 (3516) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 2c20400f-559e-4775-8dd9-06657ad43d54
    304950 (3516) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
    305356 (3516) - winsat\main.cpp:4474: > IsFormal=TRUE  IsMoobe=FALSE.
    305403 (3516) - winsat\main.cpp:4585: Watch dog system enabled
    305403 (3516) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
    305574 (3516) - winsat\main.cpp:2490: > DWM Running.
    305777 (3516) - winsat\main.cpp:2497: > turning off DWM.
    305777 (3516) - winsat\main.cpp:2470: > EMD service will be restored on exit.
    305886 (3516) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
    305886 (3516) - winsat\main.cpp:2793: > power policy saved.
    306042 (3516) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
    306073 (3516) - winsat\main.cpp:2814: > power policy set to maximum.
    306931 (3516) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
    306931 (3516) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=FALSE  RanOverTs=FALSE  RanOnbatteries=FALSE
    306931 (3516) - winsat\main.cpp:1775: > Run Assessment features
    306994 (3516) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
    319068 (3516) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58351900
    319068 (3516) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
    319068 (3516) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    325215 (3516) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    331112 (3516) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    339083 (3516) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    347492 (3516) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    353560 (3516) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    359363 (3516) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    375962 (3516) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    394386 (3516) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    402607 (3516) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    410579 (3516) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
    416288 (3516) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
    417755 (3516) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
    432497 (3516) - common\testoutputstreams.h:0072: ERROR: EC_ERRORABORT event recieved; error encountered in DShow pipeline.
    432933 (3516) - common\testoutputstreams.h:0072: ERROR: Win32 exception thrown: dsplayer.cpp @ 661 (DirectShow: playback): EC_ERRORABORT event recieved -- error in DShow pipeline (code 0x00000000)
    432933 (3516) - winsat\main.cpp:2056: > mediaex Assessment FAILED due to an error
    432933 (3516) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58351900
    432933 (3516) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.
    432933 (3516) - winsat\processresults.cpp:1274: Limiting Graphics Score to 5.9 - frames droped when decoding high definition video
    432933 (3516) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
    432949 (3516) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
    432949 (3516) - winsat\main.cpp:2855: > Power state restored.
    432949 (3516) - winsat\main.cpp:2870: > Successfully reenabled EMD.
    433199 (3516) - winsat\main.cpp:2896: > Composition restarted
    433199 (3516) - winsat\watchdog.cpp:0311: Watch dog system shutdown
    433199 (3516) - winsat\main.cpp:4909: > exit value = 1.

    2182204 (2700) - winsat\logging.cpp:0815: --- START 2010\12\23 0:14:42 AM ---
    2182219 (2700) - winsat\main.cpp:4301: Command Line = C:\Windows\system32\winsat.exe formal -log -cancelevent e2a78df8-f85e-4bdf-9e3f-0a6a4035ea79
    2182219 (2700) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
    2182453 (2700) - winsat\main.cpp:4474: > IsFormal=TRUE  IsMoobe=FALSE.
    2182500 (2700) - winsat\main.cpp:4585: Watch dog system enabled
    2182500 (2700) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
    2182625 (2700) - winsat\main.cpp:2490: > DWM Running.
    2182765 (2700) - winsat\main.cpp:2497: > turning off DWM.
    2182765 (2700) - winsat\main.cpp:2470: > EMD service will be restored on exit.
    2183093 (2700) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
    2183093 (2700) - winsat\main.cpp:2793: > power policy saved.
    2183265 (2700) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
    2183265 (2700) - winsat\main.cpp:2814: > power policy set to maximum.
    2184091 (2700) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
    2184091 (2700) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=FALSE  RanOverTs=FALSE  RanOnbatteries=FALSE
    2184091 (2700) - winsat\main.cpp:1775: > Run Assessment features
    2184154 (2700) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
    2195667 (2700) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58778200
    2195667 (2700) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
    2195667 (2700) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    2201673 (2700) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    2207679 (2700) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    2215931 (2700) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    2224543 (2700) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    2230517 (2700) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    2236492 (2700) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    2253387 (2700) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    2271904 (2700) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    2280204 (2700) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    2288331 (2700) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
    2294244 (2700) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
    2295866 (2700) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
    2306693 (2700) - common\testoutputstreams.h:0072: ERROR: EC_ERRORABORT event recieved; error encountered in DShow pipeline.
    2307317 (2700) - common\testoutputstreams.h:0072: ERROR: Win32 exception thrown: dsplayer.cpp @ 661 (DirectShow: playback): EC_ERRORABORT event recieved -- error in DShow pipeline (code 0x00000000)
    2307317 (2700) - winsat\main.cpp:2056: > mediaex Assessment FAILED due to an error
    2307317 (2700) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58778200
    2307317 (2700) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.
    2307317 (2700) - winsat\processresults.cpp:1274: Limiting Graphics Score to 5.9 - frames droped when decoding high definition video
    2307317 (2700) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
    2307332 (2700) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
    2307332 (2700) - winsat\main.cpp:2855: > Power state restored.
    2307332 (2700) - winsat\main.cpp:2870: > Successfully reenabled EMD.
    2307488 (2700) - winsat\main.cpp:2896: > Composition restarted
    2307488 (2700) - winsat\watchdog.cpp:0311: Watch dog system shutdown
    2307488 (2700) - winsat\main.cpp:4909: > exit value = 1.

    8130506 (1220) - winsat\logging.cpp:0815: --- START 2010\12\23 13:42:55 PM ---
    8130506 (1220) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 3b60fb03-2dc2-4d8b-a3bd-054554dfed24
    8130506 (1220) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
    8130631 (1220) - winsat\main.cpp:4474: > IsFormal=TRUE  IsMoobe=FALSE.
    8130678 (1220) - winsat\main.cpp:4585: Watch dog system enabled
    8130678 (1220) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
    8130787 (1220) - winsat\main.cpp:2490: > DWM Running.
    8130990 (1220) - winsat\main.cpp:2497: > turning off DWM.
    8130990 (1220) - winsat\main.cpp:2470: > EMD service will be restored on exit.
    8131099 (1220) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
    8131099 (1220) - winsat\main.cpp:2793: > power policy saved.
    8131208 (1220) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
    8131208 (1220) - winsat\main.cpp:2814: > power policy set to maximum.
    8132020 (1220) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
    8132020 (1220) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=FALSE  RanOverTs=FALSE  RanOnbatteries=FALSE
    8132020 (1220) - winsat\main.cpp:1775: > Run Assessment features
    8132098 (1220) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
    8143610 (1220) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58347000
    8143610 (1220) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
    8143626 (1220) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    8149726 (1220) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    8155669 (1220) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    8163563 (1220) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    8172096 (1220) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    8178118 (1220) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    8184030 (1220) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    8200644 (1220) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    8219053 (1220) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    8227321 (1220) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    8235245 (1220) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
    8240940 (1220) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
    8242453 (1220) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
    8255635 (1220) - common\testoutputstreams.h:0072: ERROR: EC_ERRORABORT event recieved; error encountered in DShow pipeline.
    8256056 (1220) - common\testoutputstreams.h:0072: ERROR: Win32 exception thrown: dsplayer.cpp @ 661 (DirectShow: playback): EC_ERRORABORT event recieved -- error in DShow pipeline (code 0x00000000)
    8256056 (1220) - winsat\main.cpp:2056: > mediaex Assessment FAILED due to an error
    8256056 (1220) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58347000
    8256056 (1220) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.
    8256056 (1220) - winsat\processresults.cpp:1274: Limiting Graphics Score to 5.9 - frames droped when decoding high definition video
    8256056 (1220) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
    8256072 (1220) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
    8256072 (1220) - winsat\main.cpp:2855: > Power state restored.
    8256072 (1220) - winsat\main.cpp:2870: > Successfully reenabled EMD.
    8256228 (1220) - winsat\main.cpp:2896: > Composition restarted
    8256243 (1220) - winsat\watchdog.cpp:0311: Watch dog system shutdown
    8256243 (1220) - winsat\main.cpp:4909: > exit value = 1.

    8271329 (2460) - winsat\logging.cpp:0815: --- START 2010\12\23 13:45:16 PM ---
    8271329 (2460) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent db9a4bbb-0973-40b6-a678-71fa5c61d733
    8271329 (2460) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
    8271422 (2460) - winsat\main.cpp:4474: > IsFormal=TRUE  IsMoobe=FALSE.
    8271469 (2460) - winsat\main.cpp:4585: Watch dog system enabled
    8271469 (2460) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
    8271594 (2460) - winsat\main.cpp:2490: > DWM Running.
    8271781 (2460) - winsat\main.cpp:2497: > turning off DWM.
    8271781 (2460) - winsat\main.cpp:2470: > EMD service will be restored on exit.
    8271999 (2460) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
    8272015 (2460) - winsat\main.cpp:2793: > power policy saved.
    8272124 (2460) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
    8272124 (2460) - winsat\main.cpp:2814: > power policy set to maximum.
    8272920 (2460) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
    8272935 (2460) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=FALSE  RanOverTs=FALSE  RanOnbatteries=FALSE
    8272935 (2460) - winsat\main.cpp:1775: > Run Assessment features
    8273045 (2460) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
    8284651 (2460) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58383400
    8284651 (2460) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
    8284651 (2460) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    8290563 (2460) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    8296569 (2460) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    8304744 (2460) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    8313184 (2460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    8319049 (2460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    8324899 (2460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    8341482 (2460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    8359843 (2460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    8368096 (2460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    8376239 (2460) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
    8381996 (2460) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
    8383493 (2460) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
    8401028 (2460) - common\testoutputstreams.h:0072: ERROR: EC_ERRORABORT event recieved; error encountered in DShow pipeline.
    8401449 (2460) - common\testoutputstreams.h:0072: ERROR: Win32 exception thrown: dsplayer.cpp @ 661 (DirectShow: playback): EC_ERRORABORT event recieved -- error in DShow pipeline (code 0x00000000)
    8401449 (2460) - winsat\main.cpp:2056: > mediaex Assessment FAILED due to an error
    8401449 (2460) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58383400
    8401449 (2460) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.
    8401449 (2460) - winsat\processresults.cpp:1274: Limiting Graphics Score to 5.9 - frames droped when decoding high definition video
    8401449 (2460) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
    8401465 (2460) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
    8401465 (2460) - winsat\main.cpp:2855: > Power state restored.
    8401465 (2460) - winsat\main.cpp:2870: > Successfully reenabled EMD.
    8401621 (2460) - winsat\main.cpp:2896: > Composition restarted
    8401621 (2460) - winsat\watchdog.cpp:0311: Watch dog system shutdown
    8401621 (2460) - winsat\main.cpp:4909: > exit value = 1.

    9443270 (3984) - winsat\logging.cpp:0815: --- START 2010\12\23 14:04:48 PM ---
    9443270 (3984) - winsat\main.cpp:4301: Command Line = C:\Windows\system32\winsat.exe formal -log -cancelevent df7e3e6f-92ec-406a-b0cd-ace6ca6da0f2
    9443302 (3984) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
    9443536 (3984) - winsat\main.cpp:4474: > IsFormal=TRUE  IsMoobe=FALSE.
    9443582 (3984) - winsat\main.cpp:4585: Watch dog system enabled
    9443582 (3984) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
    9443707 (3984) - winsat\main.cpp:2490: > DWM Running.
    9443879 (3984) - winsat\main.cpp:2497: > turning off DWM.
    9443879 (3984) - winsat\main.cpp:2470: > EMD service will be restored on exit.
    9444144 (3984) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
    9444144 (3984) - winsat\main.cpp:2793: > power policy saved.
    9444253 (3984) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
    9444253 (3984) - winsat\main.cpp:2814: > power policy set to maximum.
    9445064 (3984) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
    9445064 (3984) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=FALSE  RanOverTs=FALSE  RanOnbatteries=FALSE
    9445064 (3984) - winsat\main.cpp:1775: > Run Assessment features
    9445142 (3984) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
    9456718 (3984) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58737900
    9456718 (3984) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
    9456718 (3984) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    9462693 (3984) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    9468636 (3984) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    9476592 (3984) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    9485250 (3984) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    9491225 (3984) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    9497184 (3984) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    9513720 (3984) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    9532035 (3984) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    9540303 (3984) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    9548321 (3984) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
    9554031 (3984) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
    9555404 (3984) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
    9562923 (3984) - common\testoutputstreams.h:0072: ERROR: EC_ERRORABORT event recieved; error encountered in DShow pipeline.
    9563376 (3984) - common\testoutputstreams.h:0072: ERROR: Win32 exception thrown: dsplayer.cpp @ 661 (DirectShow: playback): EC_ERRORABORT event recieved -- error in DShow pipeline (code 0x00000000)
    9563376 (3984) - winsat\main.cpp:2056: > mediaex Assessment FAILED due to an error
    9563376 (3984) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58737900
    9563376 (3984) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.
    9563376 (3984) - winsat\processresults.cpp:1274: Limiting Graphics Score to 5.9 - frames droped when decoding high definition video
    9563376 (3984) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
    9563391 (3984) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
    9563391 (3984) - winsat\main.cpp:2855: > Power state restored.
    9563391 (3984) - winsat\main.cpp:2870: > Successfully reenabled EMD.
    9563516 (3984) - winsat\main.cpp:2896: > Composition restarted
    9563532 (3984) - winsat\watchdog.cpp:0311: Watch dog system shutdown
    9563532 (3984) - winsat\main.cpp:4909: > exit value = 1.

    914665 (1072) - winsat\logging.cpp:0815: --- START 2010\12\23 22:46:31 PM ---
    914665 (1072) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent edb95df6-11f4-4884-a8bd-62215d61cc35
    914665 (1072) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
    914774 (1072) - winsat\main.cpp:4474: > IsFormal=TRUE  IsMoobe=FALSE.
    914821 (1072) - winsat\main.cpp:4585: Watch dog system enabled
    914821 (1072) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
    914930 (1072) - winsat\main.cpp:2490: > DWM Running.
    915164 (1072) - winsat\main.cpp:2497: > turning off DWM.
    915164 (1072) - winsat\main.cpp:2470: > EMD service will be restored on exit.
    915257 (1072) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
    915257 (1072) - winsat\main.cpp:2793: > power policy saved.
    915398 (1072) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
    915398 (1072) - winsat\main.cpp:2814: > power policy set to maximum.
    916225 (1072) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
    916225 (1072) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=FALSE  RanOverTs=FALSE  RanOnbatteries=FALSE
    916225 (1072) - winsat\main.cpp:1775: > Run Assessment features
    916303 (1072) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
    928003 (1072) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58337200
    928003 (1072) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
    928003 (1072) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    934118 (1072) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    940093 (1072) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    947971 (1072) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    956379 (1072) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    962276 (1072) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    968189 (1072) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    984725 (1072) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    1003039 (1072) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    1011229 (1072) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    1019154 (1072) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
    1024832 (1072) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
    1026283 (1072) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
    1040901 (1072) - common\testoutputstreams.h:0072: ERROR: EC_ERRORABORT event recieved; error encountered in DShow pipeline.
    1041369 (1072) - common\testoutputstreams.h:0072: ERROR: Win32 exception thrown: dsplayer.cpp @ 661 (DirectShow: playback): EC_ERRORABORT event recieved -- error in DShow pipeline (code 0x00000000)
    1041369 (1072) - winsat\main.cpp:2056: > mediaex Assessment FAILED due to an error
    1041369 (1072) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58337200
    1041369 (1072) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.
    1041369 (1072) - winsat\processresults.cpp:1274: Limiting Graphics Score to 5.9 - frames droped when decoding high definition video
    1041369 (1072) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
    1041384 (1072) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
    1041384 (1072) - winsat\main.cpp:2855: > Power state restored.
    1041384 (1072) - winsat\main.cpp:2870: > Successfully reenabled EMD.
    1041556 (1072) - winsat\main.cpp:2896: > Composition restarted
    1041587 (1072) - winsat\watchdog.cpp:0311: Watch dog system shutdown
    1041587 (1072) - winsat\main.cpp:4909: > exit value = 1.
    Monday, December 27, 2010 4:12 AM
  • 1105688 (1540) - winsat\logging.cpp:0815: --- START 2010\12\24 9:42:03 AM ---
    1105688 (1540) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 66f38a1c-133e-479c-af37-105163117554
    1105688 (1540) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
    1105844 (1540) - winsat\main.cpp:4474: > IsFormal=TRUE  IsMoobe=FALSE.
    1105875 (1540) - winsat\main.cpp:4585: Watch dog system enabled
    1105875 (1540) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
    1106062 (1540) - winsat\main.cpp:2490: > DWM Running.
    1106296 (1540) - winsat\main.cpp:2497: > turning off DWM.
    1106296 (1540) - winsat\main.cpp:2470: > EMD service will be restored on exit.
    1106405 (1540) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
    1106405 (1540) - winsat\main.cpp:2793: > power policy saved.
    1106546 (1540) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
    1106546 (1540) - winsat\main.cpp:2814: > power policy set to maximum.
    1107357 (1540) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
    1107357 (1540) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=FALSE  RanOverTs=FALSE  RanOnbatteries=FALSE
    1107357 (1540) - winsat\main.cpp:1775: > Run Assessment features
    1107435 (1540) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
    1119743 (1540) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58335000
    1119759 (1540) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
    1119790 (1540) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    1125999 (1540) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    1132099 (1540) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    1139946 (1540) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    1148572 (1540) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    1154750 (1540) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    1160709 (1540) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    1177370 (1540) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    1195841 (1540) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    1204140 (1540) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    1212127 (1540) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
    1217853 (1540) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
    1219459 (1540) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
    1231097 (1540) - common\testoutputstreams.h:0072: ERROR: EC_ERRORABORT event recieved; error encountered in DShow pipeline.
    1231612 (1540) - common\testoutputstreams.h:0072: ERROR: Win32 exception thrown: dsplayer.cpp @ 661 (DirectShow: playback): EC_ERRORABORT event recieved -- error in DShow pipeline (code 0x00000000)
    1231612 (1540) - winsat\main.cpp:2056: > mediaex Assessment FAILED due to an error
    1231627 (1540) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58335000
    1231627 (1540) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.
    1231627 (1540) - winsat\processresults.cpp:1274: Limiting Graphics Score to 5.9 - frames droped when decoding high definition video
    1231627 (1540) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
    1231643 (1540) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
    1231643 (1540) - winsat\main.cpp:2855: > Power state restored.
    1231643 (1540) - winsat\main.cpp:2870: > Successfully reenabled EMD.
    1231799 (1540) - winsat\main.cpp:2896: > Composition restarted
    1231815 (1540) - winsat\watchdog.cpp:0311: Watch dog system shutdown
    1231815 (1540) - winsat\main.cpp:4909: > exit value = 1.

    1445318 (3212) - winsat\logging.cpp:0815: --- START 2010\12\24 9:47:43 AM ---
    1445318 (3212) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent b7206a51-47a4-450f-b8f8-3bc048e472c5
    1445318 (3212) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
    1445442 (3212) - winsat\main.cpp:4474: > IsFormal=TRUE  IsMoobe=FALSE.
    1445474 (3212) - winsat\main.cpp:4585: Watch dog system enabled
    1445474 (3212) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
    1445598 (3212) - winsat\main.cpp:2490: > DWM Running.
    1445832 (3212) - winsat\main.cpp:2497: > turning off DWM.
    1445832 (3212) - winsat\main.cpp:2470: > EMD service will be restored on exit.
    1446082 (3212) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
    1446082 (3212) - winsat\main.cpp:2793: > power policy saved.
    1446191 (3212) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
    1446207 (3212) - winsat\main.cpp:2814: > power policy set to maximum.
    1447018 (3212) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
    1447018 (3212) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=FALSE  RanOverTs=FALSE  RanOnbatteries=FALSE
    1447018 (3212) - winsat\main.cpp:1775: > Run Assessment features
    1447096 (3212) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
    1458749 (3212) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58396800
    1458749 (3212) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
    1458749 (3212) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    1464833 (3212) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    1470777 (3212) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    1478920 (3212) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    1487594 (3212) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    1493615 (3212) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    1499544 (3212) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    1516173 (3212) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    1534753 (3212) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    1543239 (3212) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    1551305 (3212) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
    1557233 (3212) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
    1558855 (3212) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
    1574408 (3212) - common\testoutputstreams.h:0072: ERROR: EC_ERRORABORT event recieved; error encountered in DShow pipeline.
    1575032 (3212) - common\testoutputstreams.h:0072: ERROR: Win32 exception thrown: dsplayer.cpp @ 661 (DirectShow: playback): EC_ERRORABORT event recieved -- error in DShow pipeline (code 0x00000000)
    1575032 (3212) - winsat\main.cpp:2056: > mediaex Assessment FAILED due to an error
    1575048 (3212) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58396800
    1575048 (3212) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.
    1575048 (3212) - winsat\processresults.cpp:1274: Limiting Graphics Score to 5.9 - frames droped when decoding high definition video
    1575048 (3212) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
    1575064 (3212) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
    1575064 (3212) - winsat\main.cpp:2855: > Power state restored.
    1575064 (3212) - winsat\main.cpp:2870: > Successfully reenabled EMD.
    1575235 (3212) - winsat\main.cpp:2896: > Composition restarted
    1575235 (3212) - winsat\watchdog.cpp:0311: Watch dog system shutdown
    1575235 (3212) - winsat\main.cpp:4909: > exit value = 1.

    11581951 (2968) - winsat\logging.cpp:0815: --- START 2010\12\24 12:36:39 PM ---
    11581966 (2968) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent cb635980-b94d-4fce-aa3d-6ad123f1e15b
    11581966 (2968) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
    11582122 (2968) - winsat\main.cpp:4474: > IsFormal=TRUE  IsMoobe=FALSE.
    11582153 (2968) - winsat\main.cpp:4585: Watch dog system enabled
    11582153 (2968) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
    11582278 (2968) - winsat\main.cpp:2490: > DWM Running.
    11582450 (2968) - winsat\main.cpp:2497: > turning off DWM.
    11582450 (2968) - winsat\main.cpp:2470: > EMD service will be restored on exit.
    11583089 (2968) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
    11583089 (2968) - winsat\main.cpp:2793: > power policy saved.
    11583339 (2968) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
    11583339 (2968) - winsat\main.cpp:2814: > power policy set to maximum.
    11584150 (2968) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
    11584150 (2968) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=FALSE  RanOverTs=FALSE  RanOnbatteries=FALSE
    11584150 (2968) - winsat\main.cpp:1775: > Run Assessment features
    11584228 (2968) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
    11596069 (2968) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58371400
    11596069 (2968) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
    11596069 (2968) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    11602231 (2968) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    11608143 (2968) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    11616271 (2968) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    11624820 (2968) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    11631013 (2968) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    11637081 (2968) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    11653773 (2968) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    11672166 (2968) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    11680450 (2968) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    11688484 (2968) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
    11694209 (2968) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
    11696034 (2968) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
    11705238 (2968) - common\testoutputstreams.h:0072: ERROR: EC_ERRORABORT event recieved; error encountered in DShow pipeline.
    11714442 (2968) - common\testoutputstreams.h:0072: ERROR: Win32 exception thrown: dsplayer.cpp @ 661 (DirectShow: playback): EC_ERRORABORT event recieved -- error in DShow pipeline (code 0x8007000e)
    11714442 (2968) - winsat\main.cpp:2056: > mediaex Assessment FAILED due to an error
    11714458 (2968) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58371400
    11714458 (2968) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.
    11714458 (2968) - winsat\processresults.cpp:1274: Limiting Graphics Score to 5.9 - frames droped when decoding high definition video
    11714458 (2968) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
    11714473 (2968) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
    11714489 (2968) - winsat\main.cpp:2855: > Power state restored.
    11714489 (2968) - winsat\main.cpp:2870: > Successfully reenabled EMD.
    11714614 (2968) - winsat\main.cpp:2896: > Composition restarted
    11714614 (2968) - winsat\watchdog.cpp:0311: Watch dog system shutdown
    11714614 (2968) - winsat\main.cpp:4909: > exit value = 1.

    11993466 (3744) - winsat\logging.cpp:0815: --- START 2010\12\24 12:43:31 PM ---
    11993466 (3744) - winsat\main.cpp:2861: > no need to restore power state (no saver object).
    11993466 (3744) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
    11993466 (3744) - winsat\main.cpp:4909: > exit value = 4.

    7931012 (2528) - winsat\logging.cpp:0815: --- START 2010\12\25 23:57:59 PM ---
    7931012 (2528) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent ab7f814c-6a20-4a16-82df-6767ea7a483e
    7931012 (2528) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
    7931262 (2528) - winsat\main.cpp:4474: > IsFormal=TRUE  IsMoobe=FALSE.
    7931293 (2528) - winsat\main.cpp:4585: Watch dog system enabled
    7931293 (2528) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
    7931543 (2528) - winsat\main.cpp:2490: > DWM Running.
    7931730 (2528) - winsat\main.cpp:2497: > turning off DWM.
    7931730 (2528) - winsat\main.cpp:2470: > EMD service will be restored on exit.
    7931839 (2528) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
    7931839 (2528) - winsat\main.cpp:2793: > power policy saved.
    7932042 (2528) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
    7932042 (2528) - winsat\main.cpp:2814: > power policy set to maximum.
    7932853 (2528) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
    7932853 (2528) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=FALSE  RanOverTs=FALSE  RanOnbatteries=FALSE
    7932853 (2528) - winsat\main.cpp:1775: > Run Assessment features
    7932962 (2528) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
    7944959 (2528) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58338100
    7944959 (2528) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
    7944959 (2528) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    7951230 (2528) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    7957423 (2528) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    7965910 (2528) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    7974942 (2528) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    7981182 (2528) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    7987313 (2528) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    8004224 (2528) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    8022944 (2528) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    8031430 (2528) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    8039511 (2528) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
    8045486 (2528) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
    8047171 (2528) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
    8061835 (2528) - common\testoutputstreams.h:0072: ERROR: EC_ERRORABORT event recieved; error encountered in DShow pipeline.
    8062412 (2528) - common\testoutputstreams.h:0072: ERROR: Win32 exception thrown: dsplayer.cpp @ 661 (DirectShow: playback): EC_ERRORABORT event recieved -- error in DShow pipeline (code 0x00000000)
    8062412 (2528) - winsat\main.cpp:2056: > mediaex Assessment FAILED due to an error
    8062412 (2528) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58338100
    8062412 (2528) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.
    8062412 (2528) - winsat\processresults.cpp:1274: Limiting Graphics Score to 5.9 - frames droped when decoding high definition video
    8062412 (2528) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
    8062459 (2528) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
    8062459 (2528) - winsat\main.cpp:2855: > Power state restored.
    8062459 (2528) - winsat\main.cpp:2870: > Successfully reenabled EMD.
    8062599 (2528) - winsat\main.cpp:2896: > Composition restarted
    8062599 (2528) - winsat\watchdog.cpp:0311: Watch dog system shutdown
    8062599 (2528) - winsat\main.cpp:4909: > exit value = 1.

    41371340 (3244) - winsat\logging.cpp:0815: --- START 2010\12\27 10:07:03 AM ---
    41371340 (3244) - winsat\main.cpp:2861: > no need to restore power state (no saver object).
    41371340 (3244) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
    41371340 (3244) - winsat\main.cpp:4909: > exit value = 4.
    Monday, December 27, 2010 4:15 AM

  • 8047171 (2528) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
    8061835 (2528) - common\testoutputstreams.h:0072: ERROR: EC_ERRORABORT event recieved; error encountered in DShow pipeline.
    8062412 (2528) - common\testoutputstreams.h:0072: ERROR: Win32 exception thrown: dsplayer.cpp @ 661 (DirectShow: playback): EC_ERRORABORT event recieved -- error in DShow pipeline (code 0x00000000)
    8062412 (2528) - winsat\main.cpp:2056: > mediaex Assessment FAILED due to an error
    8062412 (2528) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 58338100
    8062412 (2528) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.
    8062412 (2528) - winsat\processresults.cpp:1274: Limiting Graphics Score to 5.9 - frames droped when decoding high definition video
    Do you use the latest ATI drivers? Can you play the file with WMP without any errors?

    André

    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
    Monday, December 27, 2010 2:08 PM
  • i think i don't use the latest one. the WMP can be played but it can't played the video from dvd. so what must i do? just update the driver, and then what? thanks
    Monday, December 27, 2010 3:12 PM
  • update the driver and make sure you don't use a 3rd party Codec pack.

    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
    Monday, December 27, 2010 3:27 PM
  • WHICH ONE SHOULD I CHOOSE? OR SHOULD I DOWNLOAD ALL OF THEM?

    AMD Catalyst 10.12 Preview for Windows 7– Featuring the new Catalyst Control Center

    Catalyst Software Suite (64 bit) English Only

    AMD Catalyst™ Accelerated Parallel Processing (APP) Technology Edition

    ATI Catalyst Application Profiles

     

    HOW TO CHECK THE 3RD PARTY CODEC PACK?

    Tuesday, December 28, 2010 12:58 AM
  • Only install the display driver:
    http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx#2

    I don't use the CCC to change the driver settings. you should use the ATI Tray Tools :

    http://cid-a50350ea7a969f0c.office.live.com/self.aspx/Public/attsetup.exe


    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
    Tuesday, December 28, 2010 12:18 PM
  • still cant run the rating until finish. i've download the driver. n the ATI tray tools has something wrong. when i restart the computer n it loads the background n others, it says 'can not connect to low level driver. please reinstall ATI Tray Tools under administration rights with UAC dissabled. '

     

    what should i do? can you explain 1 by 1 what must i do? thank you very much

    Wednesday, December 29, 2010 4:38 AM
  • still cant run the rating until finish.

    have you looked at the log? Still the same error? Try to run sfc /Scannow to detect and fix damaged Windows files.

    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
    Wednesday, December 29, 2010 2:12 PM
  • don't know. i am using the 32 bit one. what is the different between x86 n x64? i use 6GB memory. but it on x86, it just detected 3.5 Gb. what is the different? hahhahaa
    Wednesday, December 29, 2010 3:24 PM
  • sfc/scannow ----> windows resource protection didn't find any integrity violations

    ???

    Wednesday, December 29, 2010 4:41 PM
  • i am using the 32 bit one. what is the different between x86 n x64? i use 6GB memory. but it on x86, it just detected 3.5 Gb.
    in this case install the x64 version to use the complete 6GB. Next install the latest Catalyst driver and try to calculate the WEI Index again.

    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
    Wednesday, December 29, 2010 7:25 PM
  • i've known the problem. it's because of the vga. if i chage with another vga, it can open youtube. but i must wait for the vga because the store is closed.

    does HD5870 support 3d??

    Thursday, December 30, 2010 9:20 AM
  • yes. The 5770 support 3D, too. This card is still very well to play games. Maybe your card is damaged. Do you still have warranty?

    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
    • Marked as answer by Kevin Hendarto Wednesday, January 5, 2011 1:17 AM
    Thursday, December 30, 2010 11:56 AM
  • HD5870 support 3d?? yes. maybe.which is better? nVidia GTX 460 or ATI HD5870? 
    Monday, January 3, 2011 3:32 PM
  • which is better? nVidia GTX 460 or ATI HD5870? 
    the 5870 is faster.

    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
    Monday, January 3, 2011 4:28 PM
  • but why GTX 460 has higher rating? or maybe it is because my ATI is broken?
    Tuesday, January 4, 2011 4:51 AM
  • based on this benchmark:

    http://www.computerbase.de/artikel/grafikkarten/2010/test-amd-radeon-hd-6870-und-hd-6850-update-2/22/#abschnitt_ratings

    the HD5870 is 35% faster compared to the GTX460 and the 5770 is slower.


    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
    Tuesday, January 4, 2011 2:03 PM
  • HD5970 is not good right? why does the link said that HD5970 is the best? HD5870 Super Over Clock is better than Ultra Durable right?
    Tuesday, January 4, 2011 4:55 PM
  • the HD5970 is fine. Don't ask me such details. I use an IGP and don't play games. I can only look at such benchmarks to see how good a card is.

    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
    Tuesday, January 4, 2011 7:56 PM
  • oo okay. thank you very much
    Wednesday, January 5, 2011 1:16 AM