Configuring H3C switch for radius authentication using Cisco ACS RRS feed

  • Question

  • We are using h3c switches in our organisation. we had configured the switch for radius authentication. after configuring when we try to login the authentication request is reaching at the ACS and we cannot login to the switch because of the invalid credentials received at ACS. anybody can help me to solve the issue?


    Abdul razak K

    • Moved by Aiden_Cao Wednesday, June 6, 2012 6:39 AM (From:Platform Networking)
    Tuesday, June 5, 2012 6:42 AM


  • Hi,

    Thanks for posting in Windows Server forum.

    However, from your description, the issue is not a Windows related. For best resource to get this issue resolved, I would suggest that you contact the H3C or Cisco support.

    Since I am not familiar with H3C and Cisco device, I will share the following article. Hope it helps to resolve this issue.

    HP A-Series / H3C / Comware RADIUS Administrative Login HOWTO


    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.

    Best Regards,


    Aiden Cao

    TechNet Community Support

    • Marked as answer by Aiden_Cao Monday, June 11, 2012 1:37 AM
    Wednesday, June 6, 2012 7:07 AM