locked
The AD Last Bind latency is above the configured threshold RRS feed

  • Question

  • Hi

     

    I'm getting constant alerts about "The AD Last Bind latency is above the configured threshold", and when I check the processes on these domain controllers I find that it's caused by SCE itself with wmiprvse.

     

    Is this a known problem for SCE? SP1 is installed.

     

    Regards,

     

    Magnus Ludvigsson

    Thursday, April 17, 2008 6:55 AM

All replies

  • I had the same problem, and opened an issue with Microsoft, and the response I got back was that it was a bug in the MP.  I was advised to disable it and that the new AD pack will be out in May.

    I hope that helps.
    Thursday, April 17, 2008 1:21 PM
  • Yes, that was very helpful. Thanks!

     

    Thursday, April 17, 2008 3:01 PM
  •  andy schwartz wrote:
    I had the same problem, and opened an issue with Microsoft, and the response I got back was that it was a bug in the MP.  I was advised to disable it and that the new AD pack will be out in May.

    I hope that helps.


    Have you heard anything new about this from Microsoft?
    I still can't find any new MP that would fix this.
    Monday, August 4, 2008 2:48 PM
  • Hi,

     

    Is the local language setting Non-English? If so, please change to English and import latest AD MP:

     

    http://www.microsoft.com/downloads/details.aspx?FamilyId=008F58A6-DC67-4E59-95C6-D7C7C34A1447&displaylang=en&displaylang=en

     

    After that, try to see if the problem recurs.

     

    HTH.

     

    Tuesday, August 5, 2008 2:39 AM
  • Thank you for your input.

    I've changed the regional settings on the SCE server from Swedish to US English. I also rebooted the server.
    I'll get back to you with info if that made any difference.

    I do hope I don't have to change the regional settings on the managed servers as well?

    The MP you linked to had already been imported.
    Tuesday, August 5, 2008 7:33 AM
  • I have not seen any improvement so far. The threshold alert still moves up and down between critical and warning.

    Of what I can see the monitored server has no load to speak of so I guess that SCE is a bit to sensitive when it alerts?
    I guess that is why Andy was recommended by Microsoft to disable the MP until the new pack is released.
    Tuesday, August 5, 2008 9:42 AM
  • Hi,

     

    If this is the case, we generally need to analyze the performance monitor logs and memory dump files to locate the root cause. Unfortunately, debugging is beyond what we can do in the forum because of the nature of forum support. A support call to our product service team is needed for the debugging service. I'd like to recommend that you contact Microsoft Customer Support Service (CSS) for assistance so that this problem can be resolved efficiently. To obtain the phone numbers for specific technology request please take a look at the web site listed below:

    <http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS>
     
    If you are outside the US please see <http://support.microsoft.com> for regional support phone numbers.

    Thanks for your understanding and welcome to share your experience back.

    Tuesday, August 5, 2008 12:09 PM