locked
I can't install clients RRS feed

  • Question

  • Hi!

    I have CM and when I try to deploy the client I received the following errors:

    <IPAddress SubnetAddress="10.1.0.0" Address="10.1.0.227"/>
        </IPAddresses>
      </ClientLocationInfo>
    </ContentLocationRequest>
    ']LOG]!><time="02:25:11.116+420" date="09-19-2017" component="ccmsetup" context="" type="0" thread="1344" file="siteinfo.cpp:103">
    <![LOG[Sending message header '<Msg SchemaVersion="1.1"><ID>{0E973469-5C62-4AE8-9602-1A670492A3E4}</ID><SourceID></SourceID><SourceHost>SWPWSUS01</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:SWPWSUS01:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>myserverCM</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2017-09-19T09:25:11Z</SentTime><Body Type="ByteRange" Offset="0" Length="1142"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="02:25:11.116+420" date="09-19-2017" component="ccmsetup" context="" type="0" thread="1344" file="siteinfo.cpp:192">
    <![LOG[CCM_POST 'HTTP://myserverCM/ccm_system/request']LOG]!><time="02:25:11.116+420" date="09-19-2017" component="ccmsetup" context="" type="1" thread="1344" file="httphelper.cpp:806">
    <![LOG[Failed to receive ccm message response. Status code = 403]LOG]!><time="02:25:11.116+420" date="09-19-2017" component="ccmsetup" context="" type="2" thread="1344" file="httphelper.cpp:1693">
    <![LOG[GetDPLocations failed with error 0x80004005]LOG]!><time="02:25:11.116+420" date="09-19-2017" component="ccmsetup" context="" type="3" thread="1344" file="siteinfo.cpp:592">
    <![LOG[Failed to get DP locations as the expected version from MP 'myserverCM'. Error 0x80004005]LOG]!><time="02:25:11.116+420" date="09-19-2017" component="ccmsetup" context="" type="2" thread="1344" file="ccmsetup.cpp:11319">
    <![LOG[Failed to find DP locations from MP 'myserverCM' with error 0x80004005, status code 403. Check next MP.]LOG]!><time="02:25:11.116+420" date="09-19-2017" component="ccmsetup" context="" type="2" thread="1344" file="ccmsetup.cpp:11187">
    <![LOG[Only one MP myserverCM is specified. Use it.]LOG]!><time="02:25:11.116+420" date="09-19-2017" component="ccmsetup" context="" type="1" thread="1344" file="ccmsetup.cpp:10163">
    <![LOG[Have already tried all MPs. Couldn't find DP locations.]LOG]!><time="02:25:11.116+420" date="09-19-2017" component="ccmsetup" context="" type="3" thread="1344" file="ccmsetup.cpp:11216">
    <![LOG[GET 'HTTP://myserverCM/CCM_Client/ccmsetup.cab']LOG]!><time="02:25:11.116+420" date="09-19-2017" component="ccmsetup" context="" type="1" thread="1344" file="httphelper.cpp:806">
    <![LOG[Failed to successfully complete WinHttp request. (StatusCode at WinHttpQueryHeaders: 403)]LOG]!><time="02:25:11.116+420" date="09-19-2017" component="ccmsetup" context="" type="3" thread="1344" file="state.h:69">
    <![LOG[DownloadFileByWinHTTP failed with error 0x80004005]LOG]!><time="02:25:11.116+420" date="09-19-2017" component="ccmsetup" context="" type="3" thread="1344" file="httphelper.cpp:1080">
    <![LOG[Failed to get client version for sending state messages. Error 0x8004100e]LOG]!><time="02:25:11.116+420" date="09-19-2017" component="ccmsetup" context="" type="2" thread="1344" file="state.cpp:171">
    <![LOG[Params to send '5.0.8412.1004 Deployment Error 0x80004005. Url HTTP://myserverCM/CCM_Client/ccmsetup.cab']LOG]!><time="02:25:11.116+420" date="09-19-2017" component="ccmsetup" context="" type="0" thread="1344" file="state.cpp:208">
    <![LOG[A Fallback Status Point has not been specified and no client was installed.  Message with STATEID='308' will not be sent.]LOG]!><time="02:25:11.116+420" date="09-19-2017" component="ccmsetup" context="" type="1" thread="1344" file="state.cpp:222">
    <![LOG[Failed to send status 308. Error (87D00215)]LOG]!><time="02:25:11.116+420" date="09-19-2017" component="ccmsetup" context="" type="3" thread="1344" file="state.cpp:235">
    <![LOG[Failed to connect to policy namespace. Error 0x8004100e]LOG]!><time="02:25:11.131+420" date="09-19-2017" component="ccmsetup" context="" type="3" thread="1164" file="localpolicy.cpp:367">
    <![LOG[Failed to revoke client upgrade local policy. Error 0x8004100e]LOG]!><time="02:25:11.131+420" date="09-19-2017" component="ccmsetup" context="" type="3" thread="1164" file="localpolicy.cpp:394">
    <![LOG['Configuration Manager Client Retry Task' is scheduled to run at 09/19/2017 07:25:11 AM (local) 09/19/2017 02:25:11 PM (UTC) time with arguments ' "/mp:myserverCM" "SMSSITECODE=LAN" /RetryWinTask:1'.]LOG]!><time="02:25:11.131+420" date="09-19-2017" component="ccmsetup" context="" type="1" thread="1164" file="wintask.cpp:327">
    <![LOG[Folder 'Microsoft\Microsoft\Configuration Manager' not found. Task does not exist.]LOG]!><time="02:25:11.131+420" date="09-19-2017" component="ccmsetup" context="" type="0" thread="1164" file="wintask.cpp:648">
    <![LOG[Successfully created task 'Configuration Manager Client Retry Task']LOG]!><time="02:25:11.225+420" date="09-19-2017" component="ccmsetup" context="" type="1" thread="1164" file="wintask.cpp:345">
    <![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="02:25:11.241+420" date="09-19-2017" component="ccmsetup" context="" type="1" thread="1164" file="ccmsetup.cpp:10927">


    • Edited by omoyano Tuesday, September 19, 2017 9:37 AM
    Tuesday, September 19, 2017 9:37 AM

All replies


  • <![LOG[Failed to successfully complete WinHttp request. (StatusCode at WinHttpQueryHeaders: 403)]LOG]!><time="02:25:11.116+420" date="09-19-2017" component="ccmsetup" context="" type="3" thread="1344" file="state.h:69">



    Any chance that the MP is not working?

    Torsten Meringer | http://www.mssccmfaq.de

    Tuesday, September 19, 2017 9:47 AM
  • It'a a new installation and I all looks fine.....

    How I can check that MP is working fine?

    Tuesday, September 19, 2017 9:49 AM
  • "status code 403"

    Are your site roles configured for HTTPS and/or is your site configured for HTTPS only? If so, have you deployed the proper PKI certificates to the servers *and* clients.


    Jason | https://home.configmgrftw.com | @jasonsandys

    • Proposed as answer by Lorry Luo Wednesday, September 27, 2017 5:31 AM
    Tuesday, September 19, 2017 1:04 PM
  • It'a a new installation and I all looks fine.....

    How I can check that MP is working fine?

    Hi,

    Review MPSetup.log and Mpcontrol.log.

     

    As Jason pointed out, if configured HTTPS, please deploy the certificate and make sure it correctly. Here is a guide, https://docs.microsoft.com/en-us/sccm/core/plan-design/network/example-deployment-of-pki-certificates


    Please remember to mark the replies as answers if they help. If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    Wednesday, September 20, 2017 5:19 AM
  • 

    Turnoff client firewall and check! if it works then all allow following firewall rules

    • File and Printer Sharing
    • Windows Management Instrumentation (WMI)

    Regards,

    NTRao

    Wednesday, September 20, 2017 5:57 AM
  • Firewall is unrelated here because the logfile indicates that ccmsetup is already executed locally.

    Torsten Meringer | http://www.mssccmfaq.de

    Wednesday, September 20, 2017 6:24 AM