locked
Windows 7 welcome screen issue RRS feed

  • Question

  • Hi,

    I have recently upgraded all my client machine from windows XP to windows 7 and after upgraded i observe that windows 7 stuck on welcome screen for 30 sec after login..I have installed the sp 1 but still same issue..please let me know if there is any solution for the same.

     

    Regards,

    Hakim. B


    Hakim
    Thursday, September 22, 2011 12:52 PM

All replies

  • Restart your computer in Safe Mode:
    Click Start
    Type: CMD, from the results, right click CMD
    Click 'Run as Administrator'
    At the Command Prompt, type: sfc/scannow

    This will check for any integrity violations

    Restart your system

    Also check your hard disk for errors:
    Click Start
    Type: CMD, from the results, right click CMD
    Click 'Run as Administrator'
    At the Command Prompt, type: chkdsk /r
    When you restart your system, your computer will be scanned for errors and attempts will be made to correct them.

    Also, if that does not work:
    1. Insert the Windows 7 DVD
    2. Restart your computer
    3. When asked if you want to boot from your DVD drive, do so.
    4. Choose your language, click Next.
    5. Click 'Repair your computer'
    6. Select operating system you want repair.

    MCP | MCTS | MCITP
    Thursday, September 22, 2011 1:01 PM
  • Are the computers domain members? It may be possible that the user is not authenticated against a on-site local domain controller while logging on across a forest or if the proper ports required for AD communication are not configured properly. What is the OS on the server (if in a domain)? Please provide us with more information on this, we'll assist you further after that. Thanks!
    Kunal D Mehta - a Windows Server Enthusiast | My first TechNet Wiki Article
    Thursday, September 22, 2011 2:36 PM
  • Dear Kunal,

    Thanks for prompt reply...

    We are using windows 2003 domain controller and  i have check with our network team regarding the port and everyting is configured properly...

    Please let me know if there is any patches in order to sort out this issue as we are facing this issue after upgradation and we didnt find any proper solution for the same.

    Regards,

    Hakim. B

     


    Hakim
    Saturday, September 24, 2011 4:47 PM
  • Anyone??????????????????????????????????????


    Hakim
    Wednesday, September 28, 2011 6:49 AM
  • Hi Hakim! I apologize for the delay in the follow up.

    Here's a similar thread with several proposed solutions for the problems: http://forums.asp.net/t/968778.aspx/1/10?Slow+Performance+with+Active+Directory

    Here's a thread with the exact same problem:
    http://www.juniperforum.com/index.php?topic=17511.0*

    *Apparently the above problem here was caused due to a port that was not configured. So just in case, here is a list of AD port requirements. Please verify if they are all configured correctly as described here: http://technet.microsoft.com/en-us/library/dd772723%28WS.10%29.aspx

    As I mentioned earlier, this can also happen due to authentication against a non site-local DC. More information here:
    http://blogs.technet.com/b/askds/archive/2008/09/24/domain-locator-across-a-forest-trust.aspx

    If this does not help, I would recommend you to post this question in the Windows Server Active Directory forum:
    http://social.technet.microsoft.com/Forums/en-US/winserverDS/threads

    This will help you get a more qualified pool of respondents which will help you resolve the issue faster. Hope it helps!


    Kunal D Mehta - a Windows Server Enthusiast | My first TechNet Wiki Article
    • Edited by Server Baba Wednesday, September 28, 2011 7:56 AM
    Wednesday, September 28, 2011 7:55 AM
  • Hi,

     

    According the issue, I understand it take long time when you try to logon your computer.

     

    Since many issue may cause this kind of problem. I suggest you may perform a Clean Boot then check whether this problem is caused by third party software.

     

    http://support.microsoft.com/kb/929135

     

    Note: Clean Boot is a step of troubleshooting, we can go back to normal by running MSCONIFG.

     

    Also I wondering whether you may find an Event log in “Computer management ->Event Viewer ->Windows log -> system” which Event ID is 100,such as:

     

    Log Name: Microsoft-Windows-Diagnostics-Performance/Operational

     

    Source: Microsoft-Windows-Diagnostics-Performance

     

    Date: 7/12/2010 7:30:48 PM

     

    Event ID: 100

     

    You may post this log here, then we could check the detail boot time list.


    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
    Wednesday, September 28, 2011 8:40 AM
  • Hi Zhen,

     I didn't find any log with Event ID: 100 on system, please let me know if there is any fix or patches from microsoft for the same.

     

    Regards,

    hakim. B


    Hakim
    Thursday, September 29, 2011 9:35 AM