locked
Windows server 2008 error code 0x80070035 network path was not found RRS feed

  • Question

  • H

     

    Guys,  i have setup windows server 2008 with xp client, i can access my network through my xp client pc but i can not access my xp client through my server and when i ll try to access it will give me error that network path was not found. i have already disabled firewall, enable file and printer sharing service and everything but i m pretty new in windows server 2008 enivoiurment so if anybody has solution then post me ASAP

    Wednesday, July 28, 2010 12:04 PM

Answers

  • Hi chintan78, how do you access Windows XP client? Via IP address or UNC? You can check the following factors first:

    1. Can you ping the Windows XP client?

    2. If yes, you can visit \\XXX.XXX.XXX.XXX<IP Address>\ and see the result.

    3. Enable NetBIOS over TCP/IP on all computers:

    1)   Go to “Control Panel\Network and Internet\Network Connections”.
    2)   Right-Click on the connection and choose Properties.
    3)   Click “Internet Protocol (TCP/IP) Version 4” in the list.
    4)   Click Properties, and then click Advanced.
    5)   On the Advanced TCP/IP settings windows, go to “WINS” tab.
    6)   Under NetBIOS setting, click “Enable NetBIOS over TCP/IP”, and then click OK.

    Hope this helps!


    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    • Marked as answer by Sean Zhu - Friday, August 6, 2010 1:37 AM
    Thursday, July 29, 2010 9:33 AM

All replies

  • chintan78, have you setup your server as a domain controller (dcpromo) setup shares for the xp client to access and joined the xp client to the domain?

    Wednesday, July 28, 2010 1:54 PM
  • Hi chintan78, how do you access Windows XP client? Via IP address or UNC? You can check the following factors first:

    1. Can you ping the Windows XP client?

    2. If yes, you can visit \\XXX.XXX.XXX.XXX<IP Address>\ and see the result.

    3. Enable NetBIOS over TCP/IP on all computers:

    1)   Go to “Control Panel\Network and Internet\Network Connections”.
    2)   Right-Click on the connection and choose Properties.
    3)   Click “Internet Protocol (TCP/IP) Version 4” in the list.
    4)   Click Properties, and then click Advanced.
    5)   On the Advanced TCP/IP settings windows, go to “WINS” tab.
    6)   Under NetBIOS setting, click “Enable NetBIOS over TCP/IP”, and then click OK.

    Hope this helps!


    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    • Marked as answer by Sean Zhu - Friday, August 6, 2010 1:37 AM
    Thursday, July 29, 2010 9:33 AM